motorola Moto Tag User Guide

motorola Moto Tag

At a glance

Before using your product, please read the legal, safety, and regulatory information in this guide.
Note: The images in this guide are examples only. See the User Guide for details such as dimensions of the product.

Tag case. It is recommended that you use a tag case that is open on both sides so that it will not affect the use of the button or volume of the buzzer

Pair and connect

Note: Pull out the protective film. You will hear a beep indicating the tag is powered up.

1. Hold your phone close to the tag. Make sure the phone is awake and unlocked.
2. Turn on Bluetooth on your phone.
3. Follow the onscreen instructions that pop up on your phone

Tip: See the User Guide for more operations, such as reset and unpairing.

Get more

Download the companion app to get the complete moto tag experience. To get the apps, user guides, videos, and more, visit www.motorola.com/mymototag or scan the QR code with your Camera app.

Replace the battery

1. Press the battery cover and turn counterclockwise to remove the cover.
   Note: Do not insert a pin into the buzzer hole.

2. Remove the battery and insert a CR2032 battery with the positive side (+) up.

3. Put the cover back and rotate clockwise while pushing, until rotation stops.
   

Legal, safety, and regulatory information

Battery

WARNING

• INGESTION HAZARD : This product contains a button cell or coin battery.

• DEATH or serious injury can occur if ingested.

• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

• KEEP new and used batteries OUT OF REACH of CHILDREN and animals.

• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children and animals. Do NOT dispose of batteries in household trash or incinerate.

• Even used batteries may cause severe injury or death.

• Call a local poison control center for treatment information.

• Use a CR2032 battery (nominal voltage: 3V).

• Non-rechargeable batteries are not to be recharged.

• Do not force discharge, recharge, disassemble, heat above 70°C (158°F) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

• Ensure the batteries are installed correctly according to polarity (+ and -).

• Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.

• Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children and animals.

Safety information

• Your product contains magnets and may interfere with pacemakers and other medical devices. Consult your healthcare provider and the medical device manufacturer’s directions before using this product.
• Do not attempt to disassemble, repair or modify the product by yourself. This may damage the product and could cause danger.
• The product may present a choking hazard to small children and animals.

Use & care

• Don’t use your product in temperatures below -20°C (-4°F) or above 45°C (113°F). Don’t store/ transport your product in temperatures below 20°C (-4°F) or above 70°C (158°F).
• Don’t drop, disassemble, puncture, crush or expose your product to fire.
• To clean your product, use a dry, soft cloth

Water immersion, dust and splash resistance.

Tested under controlled laboratory conditions, the product is water, splash, and dust resistant to a rating of IP67 (IEC 60529) and can be submerged up to 1 meter in still, fresh water for up to 30 minutes. Resistance will decrease as a result of normal wear. Not designed to work while submerged underwater. Do not expose to pressurized water, or liquids other than fresh water. Designed to provide protection against the ingress of solid foreign objects of size bigger than 1 millimeter. Not waterproof or dust proof. For more information, see the User Guide.

Specifications

Ultra Wideband information. Ultra Wideband (UWB) features require a paired UWB supported device. UWB availability varies by region. When use of UWB is prohibited in your region, swipe up from the home screen of your paired phone, tap Settings > , then type UWB, and find the switch to turn it off.
In the US, UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.
FCC compliance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Canada IC compliance. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Disposal & recycling. Don’t dispose of this product or its battery with your household waste. For help recycling products and packaging responsibly, visit www.motorola.com/recycling.
Warranty. This product is covered by Motorola’s limited warranty. To review the warranty visit motorola.com/accessory-legal. You may also obtain a copy of the warranty by contacting Motorola at: Motorola Mobility LLC, Attention Customer Service—Warranty Request, 222 West Merchandise Mart Plaza, Chicago, IL 60654. Arbitration & opt-out. Except where prohibited by law, any claim relating to any Motorola product will be resolved by binding arbitration, instead of in court, unless you opt-out by sending written notice within 30 days of purchase that includes your name, address, phone number, and serial number (inside the battery cover), stating that you reject this Arbitration provision to: Motorola Mobility LLC, 222 West Merchandise Mart Plaza, Attn: Arbitration

CUSTOMER SUPPORT

Provision Opt-Out, Chicago, IL 60654 or arbitrat@motorola.com.
Service & Repairs. If you have questions or need assistance, go to www.motorola.com/support.
Legal disclaimers. Product specification and other information contained in this guide are believed to be accurate at the time of printing or release.
Motorola reserves the right to correct or change any information without notice.
Product ID : moto tag (Model XT2445-1)
Manual Number : PK500100680400-A
Printed in China

References

• Legal and warranty information for Motorola accessories
• Anatel — Agência Nacional de Telecomunicações
• Reciclagem | Loja Oficial Motorola
• Country Selector | Motorola Support US
• Home | Motorola Support UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>