perenio PEHPL01/PEHPL04 Power Link WiFi Power Plug User Guide
- June 6, 2024
- Perenio
Table of Contents
PEHPL01-
PEHPL04
Power Link
Power Plug
Quick Start Guide
GENERAL INFO
| Article | PEHPL01/PEHPL03 (white), PEHPL02/PEHPL04 (black) |
|---|---|
| Integration | Apple HomeKit, Google Home & Yandex Smart Home (Alice) |
| Specification¹ | ZigBee 3.0/Bluetooth (MFi), 240VAC, 16A (4,000VA max), 0.5W, |
50/60Hz, 2.4GHz, IP20 Protection Class, plug type E/F, socket type C/F, LED
indicator, protective shutter, automatic power cutoff, overvoltage, overload,
and overheating protection, monitoring of voltage, current, and power, timers
and schedules. Operating conditions: 0°C to +40°C, up to 75% RH (non-
condensing)
Scope of Supply| Power Link, Quick Start Guide, Warranty Card, Sticker
Warranty| 2 years (Service life: 4 years)
INSTALLATION AND CONFIGURATION²
- Unpack the Power Link device, plug it into the mains socket and power on (Push the Power Button and wait until the LED flashes green).
- Activate the device in the Perenio Smart³ app or the Apple HomeKit⁴ app, and add it to Google Home/Yandex Smart Home₅ app, if required.
- Set timers and/or create operating scenarios in the mobile application.
SAFETY OPERATION RULES
The device may be connected to the power supply if the main voltage matches the value in the device specification. The device must be connected directly to the main socket. Do not connect it to other plugged-in smart plugs. It is not allowed to drop, throw or disassemble the device, as well as attempt to repair it on one’s own or use it in case of visible damage or defects.
TROUBLESHOOTING
- The LED does not light up: Check that the device is plugged in and powered on, otherwise, contact our Support.
- Timer settings disappeared: Reset to factory settings was performed. Reconfigure the smart plug.
- The Power Link device changes status to “offline” unexpectedly: Power supply failure or the smart plug is out of the ZigBee/Bluetooth coverage.
¹This device is for indoor installation only.
²All information contained herein is subject to amendments without prior
notification of the User. For current information and details on the device
description and specification, connection process, certificates, warranty and
quality issues, as well as the Perenio Smart app functionality, see
relevant Installation and Operation Manuals available for downloading at
perenio.com/documents. All trademarks and
names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured
by Perenio IoT spol s r.o. (Na Dlouhem 79, Ricany – Jazlovice 251 01, Czech
Republic). Made in China.
³Make sure that the Perenio® Control Gateway or the IoT Router was pre-
installed and connected to the network via Wi-Fi/Ethernet cable. Log in to
your user account, click on the “+” icon and follow connection tips specified
on the screen.
⁴The Power Link device must be switched to the MFi Mode, so press and hold the
Reset Button of the smart plug until its LED Indicator starts blinking fast.
Wait for the LED Indicator to stop blinking and flash blue.
⁵For Google Home and Yandex Smart Home applications, the Power Link must be
first activated in the Perenio Smart app.
Doc Date: 12/11/2020 Version: 3.0.0
©Perenio IoT spol s r.o. All Rights Reserved
Power & Reset Button
Documents / Resources
|
perenio PEHPL01/PEHPL04 Power Link WiFi Power
Plug
[pdf] User Guide
PEHPL01, PEHPL04, Power Link WiFi Power Plug
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>