Perenio PECLS01 Leak Sensor For Bathroom User Guide
- June 6, 2024
- Perenio
Table of Contents
PECLS01 Leak Sensor For Bathroom
User Guide perenio.com 
| Speaker | Leakage detectors |
|---|---|
| LED Indicator | Reset button |
GENERAL INFO
| Compatibility | iOS (12.0 and higher), Android (5.1 and higher) |
|---|---|
| Specification¹ | ZigBee HA 1.2 (Wireless connection distance: Up to 40 meters), |
battery operated (DC 3V, 1300 mAh), high-decibel alarm (up to 65dB), white
color, IP67 Protection Class, LED indicator, accurate triggering, 1.5mm
liquid level actuation, floating function, low power consumption, compact
design. Dimensions: Ø60 mm x 21 mm. Operating conditions: 0°C to +50°C, 20%
to 90% RH
Scope of Supply| PECLS01 Leak Sensor, CR123A Battery, Quick Start Guide,
Warranty Card, Sticker
Warranty| 2 years (Service life: 2 years)
INSTALLATION AND CONFIGURATION²
- Make sure that the Perenio® Control Gateway or the IoT Router was pre-installed and connected to the network via Wi-Fi/Ethernet cable.
- Unpack the Leak Sensor, open the device cover and remove the battery insulating film to power it on (The LED will blink). Close the device cover.
- Log in to your Perenio Smart Account. Then, click on the “+” icon in the “Devices” tab and follow the connection tips specified on the screen. Complete connection process.
- Click on the sensor image in the “Devices” tab to manage its functionality.
SAFETY OPERATION RULES
The User shall observe storage and transportation conditions and working temperature ranges as specified in the Manual. The User shall observe the Leak Sensor casing tightness rule as specified in the Installation & Operation Manual. It is not allowed to drop, throw or disassemble the device, as well as attempt to repair it on one’s own.
TROUBLESHOOTING
- No alarms in the case of leakage: Two leakage detectors are not in full contact with the liquid. Level the sensor properly.
- Alarms in the absence of leaks: The surface between leakage detectors contains liquid. Dry the surface.
- The sensor changes status to “offline” unexpectedly: Low battery level or the sensor is out of the ZigBee coverage.
¹This device is recommended for indoor installation.
²All information contained herein is subject to amendments without prior
notification of the User. For current information and details on the device
description and specification, connection process, certificates, warranty and
quality issues, as well as the Perenio Smart app functionality, see relevant
Installation and Operation Manuals available for downloading at
perenio.com/documents. All trademarks and
names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured
by Perenio IoT spol s r.o. (Na Dlouhem 79, Ricany – Jazlovice 251 01, Czech
Republic). Made in China.
Doc Date: 3/3/2021 Version: 3.0.0
©Perenio IoT spol s r.o. All Rights Reserved
Documents / Resources
|
Perenio PECLS01 Leak Sensor For
Bathroom
[pdf] User Guide
PECLS01, Leak Sensor For Bathroom
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>