perenio PEACG01 Smart Control Gateway User Guide
- June 5, 2024
- Perenio
Table of Contents
perenio PEACG01 Smart Control Gateway
How To Download
Instructions
- WAN LED
- LAN LED
- Power LED
- Power Button
- Reset button
- WPS button
- Power Port
- RJ-45 Port
GENERAL INFO
Specification| Wi-Fi, ZigBee (Wireless connection distance: Up to 40 m), DC 5V/0.7A (Output), 5W max, 2.4GHz. Dimensions: 110 mm x 110 mm x 31 mm. Operating conditions: 0°C
to +40°C, 5% to 85% RH
---|---
Casing1| White color, IP21 Protection Class, LED indicators, power button
Functions| Cloud platform support, collection
100 sensors), in-built RTC Module
| and| analysis| of| data| from| devices| (up| to
Scope of Supply| PEACG01 Control Gateway, RJ-45 Ethernet Cable (1.0m), Power
Adapter, Quick Start
Guide, Warranty Card, Stickers
Warranty| 2 years (Service Life: 2 years)
INSTALLATION AND CONFIGURATION
- Unpack the Control Gateway and plug it into the source of power using the power adapter.
- Connect your smartphone to Wi-Fi (2.4GHz) and log in to your Perenio Smart app Account (or download the mobile application from Google Play or Apple Store and register a new User Account). Then, click on the “+” icon in the “Devices” tab and follow connection tips specified on the screen. Complete connection process.
- Click on the Control Gateway image in the “Devices” tab to manage its functionality.
SAFETY OPERATION RULES
The Device MUST NOT be switched off or disconnected from the mains for at
least 5 minutes after the RESET Button is pressed, as well as for at least 10
minutes after the firmware update process is started. The Device must not be
installed outdoors or exposed to moisture, dust, marine air, etc. Storage and
transportation conditions, as well as working temperature ranges shall be
observed. It is not allowed to drop, throw or disassemble the device, as well
as attempt to repair it on one’s own.
TROUBLESHOOTING
- Initial connection of the Control Gateway to Wi-Fi failed: Restore factory settings by pressing the reset button for 10 seconds when the Control Gateway is powered on.
- The Control Gateway does not activate in the app when Ethernet-connected: This function is currently unavailable.
- The Control Gateway does not connect due to Wi-Fi of 5GHz error: Wrong Wi-Fi router settings. Enable the Wi-Fi access point of 2.4GHz.
This device is for indoor installation only.
All information contained herein is subject to amendments without prior
notification of the User. For current information and details on the device
description and specification, connection process, certificates, warranty and
quality issues, as well as the Perenio Smart app functionality, see relevant
Installation and Operation Manuals available for downloading at
perenio.com/documents. All trademarks and
names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured
by Perenio IoT spol s r.o. (Na Dlouhem 79, Ricany – Jazlovice 251 01, Czech
Republic). Made in China.
- Doc Date: 25/5/2022
- Version: 3.0.1
©Perenio IoT spol s r.o. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>