perenio PECSS01 Smart Smoke Sensor User Guide
- June 5, 2024
- Perenio
Table of Contents
perenio PECSS01 Smart Smoke Sensor
How To Download
Instructions
- Test Button – Indicator
- Smoke detector
- Reset button
- Mounting bracket
GENERAL INFO
| Compatibility | iOS (12.0 and higher), Android (5.1 and higher) |
|---|---|
| Specification1 | ZigBee HA 1.2 (Wireless connection distance: Up to 40m), |
battery operated (DC 3V, 1500mAh), high-decibel alarm (up to 85dB/3m), white color, mounting bracket, LED indicator, timely detection of smoke, alarm testing function, ultra-low power consumption, tool-free installation option. Dimensions: 60mm x 60mm x 49.2mm.
Operating conditions: -10°C to +50°C, up to 95% RH (non-condensing)
Scope of Supply| PECSS01 Smoke Sensor, CR123A Battery, 2x Screws with Dowels, Reset Pin,
3M Mounting tape, Quick Start Guide, Warranty Card, Sticker
Warranty| 2 years (Service life: 2 years)
INSTALLATION AND CONFIGURATION
- Make sure that the Perenio® Control Gateway or the IoT Router was pre-installed and connected to the network via Wi-Fi/Ethernet cable.
- Unpack the Smoke Sensor, unfasten its mounting bracket and remove the battery insulating strip to power it on (The LED will blink). Fasten back the mounting bracket.
- Log in to your Perenio Smart Account. Then, click on the “+” icon in the “Devices” tab and follow connection tips specified on the screen. Complete connection process.
- Click on the sensor image in the “Devices” tab to manage its functionality.
SAFETY OPERATION RULES
The User shall observe recommendations on ceiling installation, as well as
storage and transportation conditions, and working temperature ranges as
specified in the Installation and Operation Manual. The device must not be
installed outdoors or exposed to moisture, dust, marine air, etc. It is not
allowed to drop, throw or disassemble the device, as well as attempt to repair
it on one’s own.
TROUBLESHOOTING
- An alarm just after the sensor is powered on: High dust/vapor content. Clean the sensor or ventilate the room.
- Short beeps or absent/faint alarm after the sensor is powered on: Low battery level of the sensor. Change the battery.
- No alarm after pressing the test button: The battery is improperly inserted or low battery level. Observe the battery polarity or change the battery.
This device is for indoor installation only.
All information contained herein is subject to amendments without prior
notification of the User. For current information and details on the device
description and specification, connection process, certificates, warranty and
quality issues, as well as the Perenio Smart app functionality, see relevant
Installation and Operation Manuals available for downloading at
perenio.com/documents. All trademarks and
names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured
by Perenio IoT spol s r.o. (Na Dlouhem 79, Ricany – Jazlovice 251 01, Czech
Republic). Made in China.
- Doc Date: 25/5/2022
- Version: 3.0.1
©Perenio IoT spol s r.o. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>