perenio PEIFC01 Indoor Fixed 1080p Camera User Guide

: June 6, 2024
: Perenio

Table of Contents

GENERAL INFO
INSTALLATION AND CONFIGURATION²
SAFETY OPERATION RULES
TROUBLESHOOTING
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

PEIFC01
Indoor Fixed
Camera
Quick Start Guide

GENERAL INFO

Specification¹| Wi-Fi Connection (2.4GHz), Full HD 1080p, 2MP, DC 5V/1.0A (Output), viewing angle: 90º, mechanical pan/tilt: 350º/90º, white color, slot for MicroSD Card (Up to 64GB), built-in IR filter, 8 IR LEDs (Peak wave length: 850 nm). Dimensions: 70 mm x 70 mm x 120 mm
---|---
Functions| Cloud storage of recorded video (optional), motion detection, night vision (1015 m), Arm/Disarm mode, alarms, and push-notifications, antiskid coating
Scope of Supply| PEIFC01 Indoor Fixed Camera, USB-MicroUSB Cable (1.2m), USB Charger, 3M Mounting Tape, Quick Start Guide, Warranty Card, Sticker
Warranty| 2 years (Service Life: 2 years)

INSTALLATION AND CONFIGURATION²

Unpack the Indoor Fixed Camera and plug it into the mains using the USB-MicroUSB Cable and the USB
Charger.
Connect your smartphone to Wi-Fi (2.4GHz) and log in to your Perenio Smart app Account (or download the mobile application from Google Play or Apple Store and register a new User Account). Then, click on the “+” icon in the “Devices” tab and follow the connection tips specified on the screen. Complete connection process.
Click on the Camera image in the “Devices” tab to manage its functionality.

SAFETY OPERATION RULES

The Device MUST NOT be switched off or disconnected from the mains for at least 5 minutes after the RESButton is pressed, as well as for at least 10 minutes after the firmware update process is started. The Devimust not be installed outdoors or exposed to moisture, dust, marine air, etc. Storage and transportation conditions, as well as working temperature ranges, shall be observed. It is not allowed to drop, throw disassemble the device, as well as attempt to repair it on one’s own.

TROUBLESHOOTING

The Camera does not initialize or incidentally reboots: Malfunction of the power adapter or a power supply failure. Check its functioning.
Slow operation of the Camera or video loss: Camera and/or Internet connection failure. Try to reconnect.
The Camera does not connect due to Wi-Fi of 5GHz error: Wrong Wi-Fi router settings. Enable Wi-Fi access point of 2.4GHz frequency.

¹This device is for indoor installation only. Operating conditions: 0°C to +55°C, 20% to 85% RH (non-condensing).
²All information contained herein is subject to amendments without prior notification of the User. For current information and details on the device description and specification, connection process, certificates, warranty and quality issues, as well as the Perenio Smart app functionality, see relevant Installation and Operation Manuals available for downloading at perenio.com/documents. All trademarks and names herein are the property of their respective owners. See operating conditions and date of manufacture on the individual packaging. Manufactured by Perenio IoT spol s r.o. (Na Dlouhem 79, Ricany – Jazlovice 251 01, Czech Republic). Made in China.

Doc Date: 12/11/2020 Version: 3.0.0
©Perenio IoT spol s r.o. All Rights Reserved

IR LED Panel

perenio.com