ELINZ Wireless WiFi Camera User Guide
- June 6, 2024
- ELInZ
Table of Contents
WiFi Camera Quick Guide
How to Insert TF Card
Remove the two screws on the speaker cover and you will find the TF card slot of the camera.
Download and Install the XMEye App
Scan the QR code below to download the “XMEye” app or search “XMEye” in App
Store or Google Play to download it. When you install it, please allow all the
authorizations if you want full functions and alarm push notifications.
After installing the app on your smartphone, you can register an account in it and start adding your WiFi camera.
Before adding, please ensure your Smartphone is connected to the same WiFi router you want to connect your WiFi camera too. Keep the camera and your smartphone nearby the router.
Power on the camera with the power adapter and the camera will begin WiFi and initialization mode.
- Click the “ + ” in the upper right corner
- Click the “Quick Configuration” tab on the page to enter the WiFi configuration interface. Input the WiFi password, tick the “Done” button according to the tips.
- Tips will show green, Tick the boxes and then click “Complete all of the above actions” to scan.
- It may take a few seconds and then will show the green monitoring device equipment mark, click it to add device then click “OK”
Live Video Playback
Choose a device on the device list interface and click Start to video to get into the Live Video interface.
Two-way Audio
The camera has a built-in speaker and microphone so you can communicate with
your visitors anywhere with your mobile phone, Just tap the mic icon “ ” and
keep holding it when you are speaking.
www.elinz.com.au
[email protected]
1300 881 773
Documents / Resources
|
ELINZ Wireless WiFi
Camera
[pdf] User Guide
Wireless WiFi Camera
---|---