ELINZ BCPBFAST20 Qualcomm 20 Quick Charge User Manual
- June 6, 2024
- ELInZ
Table of Contents
BCPBFAST20 Qualcomm 20 Quick Charge
Thanks for choosing our PowerBank.
Our Products support to QC2.0 Quick Charge
About Quick Charge:
Quick Charge 2.0 is the next generation offast charging technology for devices
powered by Qualcomm Snapdragon processors.
This Quick charge Power Bank only works with these android mobiles that have been authorized by Qualcomm.
The accessories of the products are depend on the customer’s demand.
Precautions
- When the first time use this product, make sure the power bank is fully charged.
- When using this power bank, please leave the screen of your digital device on to make sure power bank is charging to your device properly.
- When power bank is keeping hint you with blue blinking, it indicates the low battery and you need to charge to Power Bank accordingly.
- Please pull-out charging cable when your device is fully charged, avoid powering loss.
Quick Charge
Charge to devices
- When connect Power Bank with Mobile, it will recognize if the mobile authorized by Qualcomm or not automatically. If it does support, the voltage of Power bank become to 9V for fast Charging, the Green LED indicator is blinking.
- If it doesn’t support, the voltage of Power bank become to 5V for normal charging, the Blue LED indicator is blinking Charge to Power Bank
Operation
-
LED Flashlight(if there is):keep pushing on the button 2 seconds or double click,
flashlight will be turned on and keep pushing on the button 2 seconds or double click
again, the Flash light will be turned off. -
Capacity display: There are different power level indicators; Push on the button,
power level indicator will be lightening.
Charging simple schematic diagram
Digital products charging diagram
Charging Status
Charge to devices
- LED indicator blinking, it is under charging to device
- LED indicator turn off, it’s finished charging
To be charged to Power Bank
- LED indicator blinking, Power Bank is under charging
- LED indicator turn off, Power Bank is full charged
Input/output: Input interface is Micro connector, output interface is USB connector
Caution
Safety:
- 0ver current, short circuit protect and Auto power off.
- lntelligent MCU controller, High transfer efficiency and fast charging speed.
- Fully testing for all batteries and PCB boards and finished products.
- Long battery lifespan, more than 500 times recharge cycles.
Warning:
-
Once you find Power Bank doesn’ t work during the charging, please check
if the cable is firmly connected, or you are using a wrong adapter. -
Each Power Bank gets its own lost of power conversion efficiency.
-
Do not place the Power Bank in hot and wet place.
-
Do not disassemble the Power Bank.
-
Do not expose the Power Bank into fire or water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>