GE APPLIANCES G7CDABSSTSS Drip Coffee Maker Owner’s Manual

G7CDAASSTSS
G7CDABSSTSS
Drip Coffee Maker
Owner’s Manual

G7CDABSSTSS Drip Coffee Maker

THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.

Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family.
We take pride in the craftsmanship, innovation, and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them.

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

CAUTION

IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions should always be followed including the following:

• READ ALL INSTRUCTIONS.

• DO NOT touch hot surfaces. Use handles and knobs.

• To protect against fire, electric shock, and injury to persons, do not immerse the cord, plug, or base unit in water or other liquid.

• Close supervision is necessary when any appliance is used near children. DO NOT allow children to operate this appliance.
  DO NOT leave the coffee maker on for long periods of time.

• Unplug from the outlet when either the appliance or display clock is not in use, and before cleaning. Allow the coffee maker and carafe to cool before putting on or taking off parts, and before cleaning the appliance.

• DO NOT operate any appliance with a damaged cord or plug.
  DO NOT operate any appliance that has been damaged or malfunctioned. Return appliance to an authorized service facility for examination or repair.

• The use of attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.

• Do not use outdoors.

• Place the appliance on a flat surface or table, do not let the cord hang over the edge of the table or counter, or touch a hot surface.

• DO NOT place on or near a hot gas or electric burner, or in a heated oven.

• Do not use appliances for other than intended use.

• Always power OFF when you are done using your appliance.
  Press the Brew/Cancel button to turn it OFF.

• The carafe is designed for use with this appliance. It must never be used on a range top.

• DO NOT clean the carafe with cleansers, steel wool pads, or other abrasive material.

• DO NOT leave an empty carafe on the warming plate. This can result in damage to your carafe.

• Never use the appliance if the carafe shows any signs of cracks or carafe having a loose or weakened handle. Only use the carafe with this appliance.

• Do not set a hot carafe on a wet or cold surface.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.

• FOR HOUSEHOLD USE ONLY.

• WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE BASE PANEL. NO USER-SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.

• WARNING Risk of injuries if you don’t use this appliance correctly.

• WARNING The heating element surface is subject to residual heat after use.

• Scalding may occur if the lid is removed during the brewing cycles.

• To disconnect, turn the appliance off, then remove the plug from the outlet.

• If the power cord is damaged, it must be replaced by the manufacturer, service provider, or qualified person.

• Keep out of reach of children. This appliance is not intended for use by children.

SAVE THESE INSTRUCTIONS

WARNING RISK OF FIRE OR ELECTRIC SHOCK

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
• Do not attempt to repair or replace any part of your coffee maker unless it is specifically recommended in this manual.
  All other servicing should be performed by authorized service personnel.

Notes on the cord plug:
This appliance has a polarized plug, To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way, If the plug does not fit fully into the outlet, reverse the plug, If it still does not fit, contact a qualified electrician, Do not attempt to modify the plug in any way.
Notes on the cord:
a) A short power-supply cord (or detached power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a long cord.
b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,

1. The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
2. The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

Parts Included

Glass Carafe Models

Thermal Carafe Models

Controls

Glass Carafe Models

Thermal Carafe Models

NOTE : If your model number is G7CDAASSTSS, continue to page 6.
NOTE : If your model number is, G7CDABSSTSS, skip to page 8.

Using the Glass Carafe Drip Coffee Maker

Before Use

• FOR HOUSEHOLD USE ONLY.
• If using the coffee maker for the first time, remove all packing material and clean the main unit and all accessories.
• If your coffee maker has gone unused for an extended time, we recommend cleaning the main unit and all accessories to ensure good performance and great-tasting coffee.
• To assemble the Charcoal Filter:

1. Lift the coffee maker lid and remove the charcoal water filter from the brew basket.
2. Remove the filter from the plastic packaging.
3. Lift and remove the filter wand from the water reservoir.
4. Open the bottom filter housing on the filter wand and assemble the charcoal water filter.
5. Close the filter housing on the filter wand, making sure the closure is secured.
6. Replace the filter wand in the water reservoir.
7. Filter installation is complete.
   NOTE : It is recommended to change your charcoal filter every three months.

How to Use

1. Lift to open the Coffee Maker lid. Fill the carafe with cold tap water (20-25°C) and pour it into the water reservoir at the back of the unit. The stepped water level indicator can be easily viewed inside the unit to help aid with water level accuracy.
   IMPORTANT : Before brewing, always check to make sure the water level is passed the MIN line, and add water if needed. Never exceed the MAX fill line.
   NOTE : The amount of brewed coffee will always be less than the amount of water placed into the water reservoir; as much as 10% is absorbed by coffee grounds and filters.

2. Place the empty carafe on the warming plate.

3. Place the permanent filter in the removable filter holder.
   Measure 2 level tablespoons of drip or regular ground coffee for each cup of coffee desired. For stronger or milder coffee, adjust the amount of coffee to suit your taste.

4. Drop the filter holder down into the housing. Close the lid.

5. Plug the Coffee Maker into a 120V AC electrical wall outlet.

6. After powering on, press Brew/Cancel once. The Brew/ Cancel led light will illuminate and your coffee maker will begin brewing.

7. When brewing, pressing Brew/Cancel again will cancel the brew cycle. When pressed, the button LED light will flash three time before the brew cycle is canceled, and brewing stops.

8. After brewing completes, the coffee maker will automatically enter a “keep warm” mode, turning on the warming plate in the base of the unit, for 2 hours. The warming plate will turn off automatically after 2 hours.

Set the clock
A. Press the Hour/Min. button to enter clock setting mode. The default of “12:00 AM” will be displayed upon initial plug-in.
B. Program the hour of the day using the left and right arrow buttons.
Once complete, press the Hour/Min. button again to change to programming Minutes.
C. Now program minutes by using the left and right arrows.
D. Once Hours and Minutes are programmed, press Hour/Min again to program AM or PM. Select AM or PM and press Hour/ Min to confirm your selection. The clock setup is now complete and the coffee maker will return to its idle screen.
NOTE : if the Brew/Cancel button is pressed in the middle of programming a new time, the new time will be discarded, and the previous clock time will be displayed.
NOTE : While setting the clock, if there is no button press for 15 seconds, the machine will accept the currently displayed time as the new time, and exit clock setting mode.
NOTE : if the coffee maker is in standby mode, and the controlled display is off, press and hold the Hour/Min button to enter into clock setup mode.

Function selection:
A. Brew coffee mode: Press the Brew/Cancel button to start brewing coffee. Press the button again to cancel the brew cycle.
NOTE : While brewing, all display and function buttons are unavailable until brewing completes.
B. Bold Brew Mode: For bolder, stronger-tasting coffee, press Bold Brew prior to starting a brew cycle. Press Bold Brew again to turn the function off. Press Brew/Cancel after
programming to start a Bold Brew cycle.
C. 1-4 Cups Brew Mode: For smaller batch brewing, press the 1-4 Cups button. Press the button again to turn the setting off.
NOTE : Both the Bold Brew and 1-4 Cups settings can be on at the same time. Simply press both buttons and then press Brew/ Cancel to start a bolder, small-batch brew. Pressing Brew/Cancel again will cancel the brew cycle.

Descale (Cleaning) Mode
A. To ensure quality performance and great-tasting coffee, descale your coffee maker often. This coffee maker is designed to alert you to descale every 80 brew cycles. When it’s time to descale, a Descale icon will light on the controlled display.
B. To begin descaling, press and hold the 1-4 Cups button for 2 seconds to enter descale mode. Descaling can be completed any time, even when the machine does not prompt you to do so
C. Fill the tank with water and descaler to the max level as indicated on the water gauge (the ratio of water and descaler is 4:1, refer to the instructions on the descaler. Please use “household descaler”. You may also use citric acid (vinegar) instead of descaler. (If using citric acid, the ratio of water to citric acid is 100 parts water to 3 parts citric acid).
D. Place the carafe under the brew basket.
E. Press Brew/Cancel to begin the descaling cycle.
F. In the Descale mode, the heater will operate until the water is empty.
G. When the Descale cycle is finished turn off the appliance.
H. Refill the tank with plain water.
I. Turn on the appliance and run the brew cycle until the water tank is completely empty.
J. Rinse by running the brew cycle with plain water at least 3 times.
K. NOTE: The Descale cycle will run until all water from the reservoir has been used. If the Brew/Cancel button is pushed in the middle of a Descale cycle, the machine will exit Descale mode, but the Descale indicator on the controlled display will remain lit until a full Descale cycle is completed.
L. When the Descale cycle finishes, the Descale icon will turn off, and the machine will exit Descale Mode.

Warming Plate
A. The warming plate will automatically turn on when a brew cycle completes. The Hotplate ON icon will remain lit until the warming plate turns off or warming is canceled.
B. The warming plate will remain on for 2 hours before automatically shutting off unless adjusted (see Adjust Warming Plate Time)
C. To turn the warming plate off before the 2-hour period has ended, press the Brew/Cancel button.
D. Both warming plate temperature and time can be adjusted at any time during the 2-hour warming period.

Adjust Warming Plate Time
A. The default warming plate time is 2 hours.
B. To adjust the warming plate time, press and hold the Left arrow button for 2 seconds. The machine will enter a warming plate time adjustment mode.
C. The warming plate time can be adjusted in whole-hour increments from 1 to 4 hours. Use the arrow buttons to navigate to the desired time selection.
D. The machine will automatically accept the newly adjusted time period after 3 seconds of inactivity.
E. To check the current warming time setting, push the Left arrow button once.
F. If a new time period is set in the middle of an existing warming period, the new time period will replace the previously set period. Push and hold the Left arrow button to set a new warming time.
G. NOTE : If the Brew/Cancel button is pressed in the middle of the warming plate time adjustment, the machine will exit the time adjustment mode, and return to the standard operating mode.

Adjust Warming Plate Temperature
A. The Hotplate ON icon will remain lit until the warming plate turns off or warming is canceled.
B. To adjust the temperature of the warming plate, press and hold the Right Arrow Button for 2 seconds to enter the warming plate temperature adjustment mode.
C. Use the left and right arrow buttons to navigate between 3 temperature options: 1-Low, 2-Medium, or 3-High.
D. The machine will automatically accept the new warming plate temperature setting after 3 seconds of inactivity.
E. If a new warming plate temperature is set during warming mode, the machine will accept the new temperature and use it for the remainder of the warming time period.
F. NOTE : If the Brew/Cancel button is pressed in the middle of the warming plate temperature adjustment, the machine will exit the temperature adjustment mode, maintain the currently set warming plate temperature, and return to the standard operating mode.

Delay Brew Mode (Auto Brew)
A. To set your coffee maker to brew at a future time, press the Delay Brew button to enter the delay brew mode.
B. Using the arrow buttons, select the desired hour for the future brew cycle. Once completed, press the Hour/Min button again to switch to minutes. Using the arrow buttons, select the desired minute for the future brew cycle.
C. Use the left and right arrow buttons to navigate between AM and PM. Once AM/PM is chosen, press the Hour/Min button to program brew time next.
D. Press the Delay Brew button to complete the Delay Brew setup.
New settings will also be saved after 15 seconds of inactivity.
E. Pressing Brew/Cancel during Delay Brew setup will cancel the setup process and exit Delay Brew Mode.
F. Once successfully set up, the Delay Brew icon will light on the controlled display. Once a Delay Brew program is set, pressing Delay Brew again will cancel the active Delay Brew program, but settings will be saved and used as the starting point for the next Delay Brew setup.
G. NOTE : When Delay Brew is set and active if the Brew/Cancel button is pressed, the Delay Brew program will be canceled, and the machine will begin brewing under standard operation.
H. NOTE : Auto brew will start when the machine clock reaches the Delay Brew set time. The Delay Brew ON icon will remain lit on the controlled display until the programmed brew cycle completes. Once the brew cycle is complete, the Delay Brew ON icon will turn off.
I. NOTE : To interrupt the brewing process at any time, press the Brew/Cancel button, then remove the electrical plug from the wall outlet.

Before Use

• FOR HOUSEHOLD USE ONLY.
• If using the coffee maker for the first time, remove all packing material and clean the main unit and all accessories.
• If your coffee maker has gone unused for an extended time, we recommend cleaning the main unit and all accessories to ensure good performance and great-tasting coffee.
• To assemble the Charcoal Filter:

1. Lift the coffee maker lid and remove the charcoal water filter from the brew basket.
2. Remove the filter from the plastic packaging.
3. Lift and remove the filter wand from the water reservoir.
4. Open the bottom filter housing on the filter wand and assemble the charcoal water filter.
5. Close the filter housing on the filter wand, making sure the closure is secured.
6. Replace the filter wand in the water reservoir.
7. Filter installation is complete.
   NOTE : It is recommended to change your charcoal filter every three months.

How to Use

1. Lift to open the Coffee Maker lid. Fill the carafe with cold tap water (20-25°C) and pour it into the water reservoir at the back of the unit. The stepped water level indicator can be easily viewed inside the unit to help aid with water level accuracy.
   IMPORTANT : Before brewing, always check to make sure the water level is passed the MIN line and add water if needed. Never exceed the MAX fill line.
   NOTE : The amount of brewed coffee will always be less than the amount of water placed into the water reservoir; as much as 10% is absorbed by coffee grounds and filters.

2. Place the empty carafe on the warming plate.

3. Place the permanent filter in the removable filter holder.
   Measure 2 level tablespoons of drip or regular ground coffee for each cup of coffee desired. For stronger or milder coffee, adjust the amount of coffee to suit your taste.

4. Drop the filter holder down into the housing. Close the lid.

5. Plug the Coffee Maker into a 120V AC electrical wall outlet.

6. After powering on, press Brew/Cancel once. The Brew/ Cancel led light will illuminate and your coffee maker will begin brewing.

7. When brewing, pressing Brew/Cancel again will cancel the brew cycle. When pressed, the button LED light will flash three time before the brew cycle is canceled, and brewing stops.

8. After brewing completes, the coffee maker will automatically enter a “keep warm” mode, turning on the warming plate in the base of the unit, for 2 hours. The warming plate will turn off automatically after 2 hours.

Set the clock
A. Press the Hour/Min. button to enter clock setting mode. The default of “12:00 AM” will be displayed upon initial plug-in.
B. Program the hour of the day using the left and right arrow buttons. Once complete, press the Hour/Min. button again to change to programming Minutes.
C. Now program minutes by using the left and right arrows.
D. Once Hours and Minutes are programmed, press Hour/Min again to program AM or PM. Select AM or PM and press Hour/ Min to confirm your selection. The clock setup is now complete and the coffee maker will return to is the idle screen.
NOTE : if the Brew/Cancel button is pressed in the middle of programming a new time, the new time will be discarded, and the previous clock time will be displayed.
NOTE : While setting the clock, if there is no button press for 15 seconds, the machine will accept the currently displayed time as the new time, and exit clock setting mode.
NOTE : if the coffee maker is in standby mode, press and holds the Hour/Min button to enter into clock setup mode.
Function selection:
A. Brew coffee mode: Press the Brew/Cancel button to start brewing coffee. Press the button again to cancel the brew cycle.
NOTE : While brewing, all display and function buttons are unavailable until brewing completes.
B. Bold Brew Mode: For bolder, stronger-tasting coffee, press Bold Brew prior to starting a brew cycle. Press Bold Brew again to turn the function off. Press Brew/Cancel after
programming to start a Bold Brew cycle.
C. 1-4 Cups Brew Mode: For smaller batch brewing, press the 1-4 Cups button. Press the button again to turn the setting off.
NOTE : Both the Bold Brew and 1-4 Cups settings can be on at the same time. Simply press both buttons and then press Brew/ Cancel to start a bolder, small-batch brew. Pressing Brew/Cancel again will cancel the brew cycle.

Descale (Cleaning) Mode
A. To ensure quality performance and great-tasting coffee, descale your coffee maker often. This coffee maker is designed to alert you to descale every 80 brew cycles. When it’s time to descale, a Descale icon will light on the controlled display.
B. To begin descaling, press and hold the 1-4 Cups button for 2 seconds to enter descale mode. Descaling can be completed at any time, even when the machine does not prompt you to do so
C. Fill the tank with water and descaler to the max level as indicated on the water gauge (the ratio of water and descaler is 4:1, refer to the instructions on the descaler. Please use “household descaler”. You may also use citric acid (vinegar) instead of descaler. (If using citric acid, the ratio of water to citric acid is 100 parts water to 3 parts citric acid).
D. Place the carafe under the brew basket.
E. Press Brew/Cancel to begin the descaling cycle.
F. In the Descale mode, the heater will operate until the water is empty.
G. When the Descale cycle is finished turn off the appliance.
H. Refill the tank with plain water.
I. Turn on the appliance and run the brew cycle until the water tank is completely empty.
J. Rinse by running the brew cycle with plain water at least 3 times.
K. NOTE : The Descale cycle will run until all water from the reservoir has been used. If the Brew/Cancel button is pushed in the middle of a Descale cycle, the machine will exit Descale mode, but the Descale indicator on the controlled display will remain lit until a full Descale cycle is completed.
L. When the Descale cycle finishes, the Descale icon will turn off, and the machine will exit Descale Mode.

Single Serve Mode (Not available for Glass Carafe model)

A. To brew using the Single Serve feature, slide the lever on the brew chamber to the right side selection. To switch back to the default carafe brewing, slide the lever on the brew chamber to the left side selection.
B. When the slider is in the Single Serve position, 1-4 Cups will light on the controlled display. This icon shows that single-serve brew has been selected.
C. The Bold Brew button can be pressed and activated during a Single Serve brew for a bolder flavor.
D. Make sure your cup, mug, or travel tumbler is in place beneath the brew chamber, and press Brew/Cancel to start Single Serve to brew.
NOTE : The Single Serve feature is designed to brew a maximum of 4 cups (20oz.)
NOTE : Maximum mug height is 6.5’’.
NOTE : The Single Serve feature is designed for cups, mugs, or travel tumblers.
NOTE : The 1-4 cup feature is designed for brewing into the carafe.
NOTE : If the Brew Chamber slider changes position during an active brew cycle, no change will occur until the end of the active brew cycle.
NOTE : While the brew chamber slider is in the Single Serve position, the 1-4 Cups Icon will be lit on the controlled display and cannot be turned off with the 1-4 Cups button. This light can be turned off by adjusting the slider to the left carafe position.
Delay Brew Mode (Auto Brew)
A. To set your coffee maker to brew at a future time, press the Delay Brew button to enter the delay brew mode.
B. Using the arrow buttons, select the desired hour for the future brew cycle. Once completed, press the Hour/Min button again to switch to minutes. Using the arrow buttons, select the desired minute for the future brew cycle.
C. Use the left and right arrow buttons to navigate between AM and PM. Once AM/PM is chosen, press the Hour/Min button to program brew time next.
D. Press the Delay Brew button to complete the Delay Brew setup.
New settings will also be saved after 15 seconds of inactivity.
E. Pressing Brew/Cancel during Delay Brew setup will cancel the setup process and exit Delay Brew Mode.
F. Once successfully set up, the Delay Brew icon will light on the controlled display. Once a Delay Brew program is set, pressing Delay Brew again will cancel the active Delay Brew program, but settings will be saved and used as the starting point for the next Delay Brew setup.
G. NOTE : When Delay Brew is set and active if the Brew/Cancel button is pressed, the Delay Brew program will be canceled, and the machine will begin brewing under standard operation.
H. NOTE : Auto brew will start when the machine clock reaches the Delay Brew set time. The Delay Brew ON icon will remain lit on the controlled display until the programmed brew cycle completes. Once the brew cycle is complete, the Delay Brew ON icon will turn off.
I. NOTE : To interrupt the brewing process at any time, press the Brew/Cancel button, then remove the electrical plug from the wall outlet.

Care and Cleaning

Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not immerse the cord, plug, or unit in water or liquid.

1. Clean all detachable parts after each use in hot soapy water.

2. Wipe the exterior surface of the unit with a soft, damp cloth to remove stains, water spots, or fingerprints.

3. Water droplets may build up in the brew chamber from steam and cause dripping before, during, or after brewing.
   To prevent drips, wipe off water droplets with a clean dry cloth after each use.

4. After washing and drying completely, replace all components in the coffee maker.

Removing Mineral Deposits

To keep your coffee maker operating efficiently, periodically you should clean away the mineral deposits left by the water according to the water quality in your area and the use frequency. Follow the Descale steps on page 7 or 9 to descale your appliance.

Hints for Great-Tasting Coffee

1. A clean coffee maker is essential for making great-tasting coffee. Regularly clean the coffee maker as specified in the“Care and Cleaning” section. Always use fresh, cold water
   in the coffee maker.

2. Store unused coffee grounds in a cool, dry place. After opening a package of coffee powder, reseal it tightly and store it in a refrigerator to maintain its freshness.

3. For an optimum coffee taste, buy whole coffee beans and finely grind them just before brewing.

4. Do not reuse coffee powder since this will greatly reduce the coffee’ flavor. Reheating coffee is not recommended as coffee is at its peak flavor immediately after brewing.

5. Clean the coffee maker when over-extraction causes oiliness. Small oil droplets on the surface of brewed, black coffee are due to the extraction of oil from the coffee
   powder.

6. Oiliness may occur more frequently if heavily roasted coffees are used.
   Any other servicing should be performed by an authorized service representative.

GE Appliances Limited Warranty

GEAppliances.com
Please have your serial number and your model number available when calling for service.
Call 1.800.GE.CARES (1-800-432-2737) for service questions.

For the Period of  GE Appliances Covers

One Year
From the date of the original purchase
If the coffee maker fails due to a defect in materials or workmanship, during the limited one-year warranty, GE Appliances will either replace your product with a new one or remanufactured product or refund the purchase price of the product at GE Appliances’ sole discretion.

What GE Appliances Will Not Cover:

• Failure of the product if it is abused, misused, or used for other than the intended purpose or used commercially.
• Replacement of house fuses or resetting of circuit breakers.
• Damage caused after delivery.
• Replacement of the light bulbs, if included.
• Damage to the product caused by accident, fire, floods, or acts of God.
• Incidental or consequential damage caused by possible defects with this appliance.

EXCLUSION OF IMPLIED WARRANTIES

Your sole and exclusive remedies are product exchange or refund as provided in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

For sale in the 50 United States and the District of Columbia only: For US Customers: This limited warranty is extended to the original purchaser for products purchased for home use within the USA.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor: GE Appliances, a Haier company
Louisville, KY 40225

For Customers in Canada: This limited warranty is extended to the original purchaser and any succeeding owner for products purchased in Canada for home use within Canada. In-home warranty service will be provided in areas where it is available and deemed reasonable by Mabe to provide.

Warrantor Canada: MC Commercial, Burlington, Ontario, L7R 5B6

Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.

Consumer Support

Service and Registration
Register your new appliance online at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise.
Register your appliance at GEAppliances.com/register.

Contact Us
If you are not satisfied with the service you receive from GE Appliances, contact us on our Website with all the details including your phone number, or write to:
In the US: General Manager, Customer Relations | GE Appliances, Appliance Park | Louisville, KY 40225
GEAppliances.com/contact
In Canada: Director, Consumer Relations, Mabe Canada Inc. | Suite 310, 1 Factory Lane | Moncton, N.B. E1C 9M3
GEAppliances.ca/en/contact-us

Write the model and serial numbers here:
Model # _____
Serial # _____
Find these numbers on a label on the back of the unit.
GE is a trademark of the General Electric Company. Manufactured under trademark license.
49-9000045 Rev. 1

Documents / Resources

| GE APPLIANCES G7CDABSSTSS Drip Coffee Maker [pdf] Owner's Manual
G7CDAASSTSS, G7CDABSSTSS, Drip Coffee Maker, G7CDABSSTSS Drip Coffee Maker, Coffee Maker, Maker
---|---

References

• Contact Us or Get Help with Questions | GE Appliances
• GEAppliances.com/register

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>