Perenio PEIRC01 Indoor Motor Camera User Guide
- June 6, 2024
- Perenio
Table of Contents
PEIRC01
Indoor Motor
Camera
Quick Start Guide
GENERAL INFO
Specification¹
| Wi-Fi Connection (2.4GHz), Full HD 1080p, 2MP, DC 5V/2.0A (Output), viewing
angle: 90º, remote pan/tilt: 350º/120º, white color, slot for MicroSD Card (Up
to 64GB), built-in IR filter, 11 IR LEDs (Peak wave length: 850 nm).
Dimensions:
90 mm x 112 mm x 112 mm
---|---
Functions| Cloud storage of recorded video (optional), motion detection, night
vision (up to 15 m), Arm/Disarm mode, alarms and push-notifications,
connection to external audio devices, mounting holes
Scope of Supply| PEIRC01 Indoor Motor Camera, RJ-45 Ethernet Cable (1.5m),
Power Adapter (1.5m), Quick Start Guide, Warranty Card, Sticker
Warranty| 2 years (Service Life: 2 years)
INSTALLATION AND CONFIGURATION 2
- Unpack the Indoor Motor Camera and plug it into the source of power using the power adapter.
- Connect your smartphone to Wi-Fi (2.4GHz) and log in to your Perenio Smart app Account (or download the mobile application from Google Play or Apple Store and register a new User Account). Then, click on the “+” icon in the “Devices” tab and follow the connection tips specified on the screen. Complete connection process.
- Click on the Motor Camera image in the “Devices” tab to manage its functionality.
SAFETY OPERATION RULES
The Device MUST NOT be switched off or disconnected from the mains for at least 5 minutes after the RESET button is pressed, as well as for at least 10 minutes after the firmware update process is started. The Device must not be installed outdoors or exposed to moisture, dust, marine air, etc. Storage and transportation conditions, as well as working temperature ranges, shall be observed. It is not allowed to drop, throw or disassemble the device, as well as attempt to repair it on one’s own.
TROUBLESHOOTING
- The Camera does not initialize or incidentally reboots: Malfunction of the power adapter or a power supply Check its functioning.
- Slow operation of the Camera or video loss: Camera and/or Internet connection failure. Try to reconnect.
- The Camera does not connect due to Wi-Fi of 5GHz error: Wrong Wi-Fi router settings. Enable Wi-Fi access point of 2.4GHz frequency.
1 This device is for indoor installation only. Operating conditions: 0°C to +55°C, 20% to 85% RH (non-condensing).
2 All information contained herein is subject to amendments without prior notification of the User. For current information and details on the device description and specification, connection process, certificates, warranty and quality issues, as well as the Perenio Smart app functionality, see relevant Installation and Operatbn Manuals available for downloading at perenio.com/documents . All trademarks and names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured by Perenio IoT spol s r.o . (Na Dlouhem 79, Ricany – lazbvice 251 01, Czech Republic). Made in China.
Doc Date: 12/11/2020
Version: 3.0.0
©Perenio IoT spol s r.o. All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>