Avantree BTHS-AS70 AS70 Wireless Audio Receiver for Wired Headphones User Guide

June 6, 2024
Avantree

Avantree - logo For a better Experience
AS70
Wireless Audio Receiver
for Wired Headphones
Model No.: BTHS-AS70
Quick Start Guide
Please visit
Avantree BTHS AS70 AS70 Wireless Audio Receiver for Wired
Headphones - qr code

avantree.com/product-support/as70
for detailed step-by-step setup guide

What’s in the box?

Avantree BTHS AS70 AS70 Wireless Audio Receiver
for Wired Headphones - fig

Products overview

Avantree BTHS AS70 AS70 Wireless Audio Receiver
for Wired Headphones - Products overview1Avantree BTHS AS70 AS70
Wireless Audio Receiver for Wired Headphones - Products
overview

**Basic Operation

**

Function (Operation

General function
Power on/off| Slide to •/o
Enter pairing mode| After power on,slide to and hold it there for 2 seconds
Reconnecting| Slide to once
Music control
Play/pause| Press ►i once
Volume up/down| Press + / – once
Next/previous track| Press and hold + / – for 1 second
Sound mode switch| Press and hold MODE for 2 seconds
Call control
Answer/end a call| Press ►ii once
Reject a call| Press and hold ►i for 1 second

Note Some functions may not work when used with different mobile
phones or other Bluetooth devices.

Important LED Indicator

Bluetooth

Pairing| Flash BLUE & RED quickly
Connected via aptX-HD| Triple-flash BLUE every S seconds
Connected via aptX-Low Latency / FastStream| Solid BLUE

Connect to a Bluetooth device
1. Enter the AS70 into PAIRING MODE –Slide to to turn on the AS70, then slide the switch to the position and hold it there for 2 BLUE & RED alternately. If you have a device plugged into it, you’ll hear “pairing”. seconds. The LED indicator will start flashing
2. On your device – Activate Bluetooth, search & select “Avantree AS70” to connect. If you are using a Bluetooth transmitter, enter your transmitter into Bluetooth PAIRING Mode.
3. Once connected, the LED indicator will either flash BLUE or become SOLID BLUE (see chart above.) If you have a device plugged into it, you’ll hear “connected”.
Reconnect to a Bluetooth device
Once powered on, the AS70 should automatically reconnect to the last connected device within 5-10 seconds. If it doesn’t, please either slide the position ONCE or select  “Avantree AS70” from your device’s Bluetooth menu to connect manually. (If you’re using a Bluetooth transmitter, please refer its user manual.)
Charging
When the LED indicator starts flashing  RED, you should charge the device. Connect the AS70 to a power source using the micro-USB cable we provided. You may either use an all plug with 5V/500mA-1A (please utilize a USB-wall plug adapter such as a mobile phone charger) or a PC USB port. The LED indicator will turn RED while charging and turn BLUE when the charging is complete. It normally takes around 2 hours to fully charge. The AS70 supports working while charging, but it will automatically turn resume working.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Avantronics Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by Avantronics Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the  following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
• Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio and recommendations reffect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
Plantronics Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.avantree.com In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
IC
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Manufacturer: Plantronics Limited
Address: Luohu District, Shenzhen 518000 China
US Importer:
Avantree Corporation
San Jose, California 95119 the USA
UK Importer:
Avantree Limited
Watford, WD180 0HQ UK
EC REP
Servicer in Europe:
APEX CE SPECIALISTS LIMITED  UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
Any questions? Please visit: support.avantree.com
(User Manuals, FAQ, Video Tutorials and more)
Email support: [email protected] (Response Time: 1 working day)
Live chat: www.avantree.com
Dispose of the packaging and this product in accordance with the latest provisions.
Z-PKMN-AS70-GRY-V3

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Avantree User Manuals

Related Manuals