Avantree BTTC-580 Orbit Wireless Transmitter for TV User Guide

June 6, 2024
Avantree

Avantree® Orbit
Wireless Transmitter
for TV
**Model No: BTTC-580

**www.avantree.com/product-support/BTTC-580-TTN
for detailed step-by step setup guide

Quick Start Guide
Box Contents

Product Overview& basic operations
Using the Orbit
Step 1: Connecting the Orbit to your TV
Part 1: Determine what types of audio ports you have. Do not turn anything on
OPTION 1: Digital OPTICAL/TOSLINK/SPDIF – Recommended!

OPTION 2: AUX 3.5mm/ Headphone Out

**OPTION 3: Red/White RCA Audio Out**
The Red &White ports must be labeled “AUDIO OUT” otherwise it won’t work.

OPTION 4: Can’t Reach / Do Not Have Output Ports on TV?

OPTION 5: You have a Soundbar or AV Receiver and use OPTICAL/TOSLINK/SPDIF Out Ports

OPTION 6: You have a Soundbar or AV Receiver and use AUX 3.5mm Out Ports

Step 2: Connecting Bluetooth Headphones/Speaker to the Orbit
Part 1: Connect the Orbit to a Power Source and turn it on
Use a USB port on TV (TV must be ON) or a Wall Plug(Via a 5V/0.5/2A rated adapter)
Part 2: Get your Bluetooth Headphones/Speakers into PAIRING MODE
Please refer to your headphones/speaker’s user manual for details.
EN: *”OPT/AUX/Mic”, “APTX-LL/APTX/FS/SBC” and “Connected” indicate successful connection.
Avantree BTT 580 Orbit Wireless Transmitter for TV - Digital
OPTICAL12

Step 3: TV Sound Settings – ONLY if using TV
OPTICAL/TOSLINK/SPDIF Port
Use your TV remote to go into your TV’s SETTINGS MENU, set
TV Audio Output channel to OPTICAL OUT.
Not all TVs need to do this.| Can’t pair with your headphones/speakers?
No sound/Something not working?
For problems connecting or other troubleshooting
tips go to the URL below. support.avantree.com

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Avantronics Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This  device must accept any interference.Changes or modiffcations not expressly approved by Avantronics Ltd. will void the user’s authority to operate the equipment. This  equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  easonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is  encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
• Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radio frequency electro-magnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reffect the consensus of the scientiffc community and result from deliberations of panels and committees of scientists
who continually review and interpret the extensive research literature.
CE
Avantronics Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full test of the  EU declaration of conformity is available at the following internet address: www.avantree.com In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
IC
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Manufacturer: Avantronics Limited
Address: Luohu District, Shenzhen 518000 China
US Importer:
Avantree Corporation
San Jose, California 95119 USA
UK Importer:
Avantree Limited
Watford, WD180 0HQ UK
EC REP
Servicer in Europe:
APEX CE SPECIALISTS LIMITED UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND

Dispose of the packaging and this product in accordance with the latest provisions.

Z-PKQG-TC580-V7

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals