Harbor Freight ARMSTRONG 37″-80″ Full Motion TV Wall Mount Owner’s Manual
- June 6, 2024
- HARBOR FREIGHT
Table of Contents
ARMSTRONG 37″-80″ Full Motion TV Wall Mount
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
21c
Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com
64357
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken,
please call 1-888-866-5797 as soon as
possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools. Diagrams
within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein.
Tools required for assembly and service may not be included.
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
SaFEty
table of Contents
Safety ………………………………………………… 2 Specifications ……………………………………… 3 Installation ………………………………………….. 4
Parts List……………………………………………. 11 Warranty ……………………………………………. 12
WarnInG SyMBolS anD DEFInItIonS This is the safety alert symbol. It is used to
alert you to potential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death. Indicates a hazardous
situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
Addresses practices not related to personal injury.
InStallatIon
PartS lISt
Page 2
For technical questions, please call 1-888-866-5797.
Item 64357
SaFEty
InStallatIon
IMPortant SaFEty InForMatIon
Failure to heed these warnings may result in personal injury and/or property damage:
1. Do not exceed listed weight capacity. Be aware of dynamic loading! Sudden
load movement may briefly create excess load causing product failure.
2. Do not mount to hollow wall, gypsum board, or similar material that will
not support the weight of the TV. Mount only to
structurallyVRXQG[RUODUJHUZRRGVWXGRUPLQLPXP 8 inch thick solid concrete walls
that can safely support combined weight of TV Mount, TV and all attached
hardware and components.
3. Verify that mounting surface has no hidden utility lines before drilling
or driving screws.
4. Wear ANSI-approved safety goggles and heavy-duty work gloves during
installation.
5. Inspect before installing; do not mount to wall if parts are missing,
loose or damaged.
6. Assemble and install only according to these instructions. Improper
assembly and installation can create hazards and lead to personal injury and
property damage.
7. Keep installation area clean and well lit.
8. Do not assemble or install when tired or when under the influence of drugs
or medication.
9. Weight capacity and other product capabilities apply to properly and
completely assembled product only.
10. Use as intended only. Use to mount VESA compliant TV to vertical wall
only. Do not mount overhead or to non-vertical surface.
11. This product is not a toy. Do not allow children to play with or near
this item.
12. Maintain product labels and nameplates. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
13. The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
14. Carefully read tV instructions before installation. Harbor Freight tools
is not responsible for damage caused by failure to follow tV mounting
instructions, improper installation, or improper/loose hardware.
SaVE tHESE InStrUCtIonS.
Specifications
Weight Capacity
130 lb
TV Size Range
DERXWWRGLDJRQDO
VESA Compliance (in mm)
100 x 100 [ 200 x 200 300 x 300 [ 400 x 400 [
PartS lISt
Item 64357
For technical questions, please call 1-888-866-5797.
Page 3
SaFEty
Installation Instructions
read the EntIrE IMPortant SaFEty InForMatIon section at the beginning of this
manual including all text under subheadings therein before set up or use of
this product.
Mount Wall Mount
Wood Studs
CaUtIon! Do not mount to steel wall studs.
1. 9HULIZRRGVWXGVDUHDWOHDVWDSDUW Use a stud finder (sold separately) to find
two DGMDFHQWVWXGVDSDUW0DUNORFDWLRQVRIVWXGV
WarnInG! to PrEVEnt SErIoUS InJUry: Verify that mounting surface has no hidden
utility lines before drilling or driving screws.
2. Set Wall Mount (1) against wall at desired height. Place a level (sold
separately) on top of Wall Mount, adjust until level. Mark locations of
mounting holes.
3. ‘ULOOIRXUKROHVGHHSLQWR studs at marked locations.
WarnInG! to PrEVEnt SErIoUS InJUry: only mount Wall Mount to wood studs. Do
not mount Wall Mount to drywall or plaster.
4. Use four Wall Lag Bolts (17) and four Wall Washers (19) to mount Wall
Mount to wood studs.
Wall Washer (19)
Wall lag Bolt (17)
Wall Mount (1)
InStallatIon
PartS lISt
Page 4
For technical questions, please call 1-888-866-5797.
Item 64357
SaFEty
Concrete
CaUtIon! Do not mount to brick or cinder block wall. Minimum 8 inch thick solid concrete is required.
WarnInG! to PrEVEnt SErIoUS InJUry: Concrete Wall Anchors must be set firmly into concrete.
1. Set Wall Mount (1) against wall at desired height. Place a level (sold separately) on top of Wall Mount, adjust until level. Mark locations of mounting holes.
4. Use four Wall Lag Bolts (17) and Wall Washers (19) to mount Wall Mount to wall.
2. 8VLQJDFDUELGHWLSPDVRQUELWGULOOIRXU KROHVGHHSDWPDUNHGORFDWLRQV
3. Insert Concrete Wall Anchors (18) into holes, making sure they are flush with wall surface.
Concrete
Concrete Wall anchor (18)
3-1/2
Wall Washer (19)
Wall lag Bolt (17)
Wall Mount (1)
InStallatIon
PartS lISt
Item 64357
For technical questions, please call 1-888-866-5797.
Page 5
SaFEty
InStallatIon
Mount tV Plate to tV
WarnInG! to PrEVEnt SErIoUS InJUry: to reduce risk of electric shock, unplug tV before threading bolts into tV’s back panel.
notICE: Consult TV owner’s manual before attaching this Mount. Harbor Freight Tools is not responsible for damage caused by failure to follow TV mounting instructions, improper installation, or improper/loose hardware.
1. Cover TV screen with a towel or other soft material and tilt it against
the wall or another solid surface. Do not lay tV face down.
2. Consult TV Owner’s Manual to determine TV’s VESA mounting pattern and
hardware requirements.
3. Mounting Hardware:
a. Use mounting hardware that came with the TV, or
b. If the TV did not come with mounting hardware, select from included TV
Bolts, TV Washers and TV Spacers (see Parts List on page 11).
WarnInG! to prevent serious injury, do not use hardware that does not match the tV’s hardware, that is too long or too short, or overtighten the hardware. Doing so may damage the tV, create a shock hazard by electrifying the hardware/mount, and/or cause the tV to fall.
4. Select Mounting Instructions below according to TV’s mounting pattern.
Mounting Instructions for VESa 100 x 100, 200 x 100, 200 x 200
Attach TV Plate (2) to Mounting Holes on TV using appropriate TV Bolts and TV
Washers. Use TV Spacers if necessary.
tV Bolt (4-9)
tV Spacer (13 or 14) (if necessary)
Mounting Hole on tV
tV Washer (10-12)
tV Plate (2)
PartS lISt
Page 6
For technical questions, please call 1-888-866-5797.
Item 64357
SaFEty
Mounting Instructions for VESa 400 x 200 1. Attach TV Plate (2) to Horizontal Bars (20), using Bar Bolts (22) and Bar Washers (23).
Bar Bolt (22)
Bar Washer (23)
Horizontal Bar (20)
tV Plate (2)
2. Attach Horizontal Bars to Mounting Holes on TV using appropriate TV Bolts and TV Washers. Use TV Spacers if necessary.
tV Spacer (13 or 14) (if necessary)
Mounting Hole on tV
tV Bolt tV Washer
(4 – 9)
(10 – 12)
Horizontal Bar
InStallatIon
PartS lISt
Item 64357
For technical questions, please call 1-888-866-5797.
Page 7
SaFEty
Mounting Instructions for VESa 300 x 300, 400 x 400, 600 x 400
1. Attach Vertical Bars (21) to Mounting Holes on TV using appropriate TV Bolts and TV Washers. Use TV Spacers if necessary.
2. Attach Horizontal Bars (20) to Vertical Bars, using Bar Bolts (22) and Bar
Washers (23).
3. Attach TV Plate (2) to Horizontal Bars, using Bar Bolts (22) and Bar
Washers (23).
1
tV Spacer (13 or 14) (if necessary)
tV Washer (10 – 12)
Mounting Hole on tV
tV Bolt (4 – 9)
Vertical Bar (21)
Horizontal Bar (20)
2
Bar
Washer
(23)
Bar Bolt (22)
tV Plate (2)
3
Bar Bar Bolt Washer
(22)
(23)
InStallatIon
PartS lISt
Page 8
For technical questions, please call 1-888-866-5797.
Item 64357
SaFEty
Mount tV to Wall Mount
1. Attach TV Plate Washer (16) and Nut (15) to Upper Post using included Wrench. Do not tighten Nut.
tV Plate Washer (16)
Upper Post
3. Attach TV Plate Washers (16) and Nuts (15) to Lower Posts using included
Wrench. Do not tighten Nuts.
4. Level TV, then tighten Nuts on Upper and Lower Posts securely.
tV Plate nut (15)
2. Using an assistant, lift TV, slide TV Plate Nut over Notch on TV Mount and
route Lower Posts through Lower Post Holes.
tV Plate nut (15)
lower Posts notch
tV Plate Bolt (15)
tV Plate Washer (16)
5. Route TV wires through clips.
Clips
InStallatIon
PartS lISt
Item 64357
lower Post Holes
For technical questions, please call
1-888-866-5797.
Page 9
adjustment
1. Adjust Tilt if desired: a. Loosen Tilt Adjustment Nuts on Wall Mount
(behind TV Plate) with included Wrench. b. Adjust tilt. c. Tighten Tilt
Adjustment Nuts.
note: Gently move the TV when changing its position. Do not force it or press
on the screen directly.
tilt adjustment
nuts
SaFEty
InStallatIon
PartS lISt
PlEaSE rEaD tHE FolloWInG CarEFUlly
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
record Product’s Serial number Here: note: If product has no serial number,
record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are
not available individually as replacement parts. Specify UPC 193175366672 when
ordering parts.
Page 10
For technical questions, please call 1-888-866-5797.
Item 64357
SaFEty
Parts list
Part
Description
1 Wall Mount
2 TV Plate
3 Wrench M6
4 TV Bolt M4 x 12
5 TV Bolt M4 x 30
6 TV Bolt M6 x 20
7 TV Bolt M6 x 35
8 TV Bolt M8 x 20
9 TV Bolt M8 x 35
10 TV Washer M4
11 TV Washer M6
12 TV Washer M8
Qty
Part
Description
1
13 TV Spacer M4
1
14 TV Spacer M6/M8
1
15 TV Plate Nut M6
4
16 TV Plate Washer M6
4
17 Wall Lag Bolt M8x90
4
18 Concrete Wall Anchor M10x80
4
19 Wall Washer
4
20 Horizontal Bar
4
21 Vertical Bar
4
22 Bar Bolt M6x8
4
23 Bar Washer M6
4
Qty
4 8 3 3 6 6 6 2 2 8 8
InStallatIon
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Item 64357
For technical questions, please call 1-888-866-5797.
Page 11
PartS lISt
limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our
product. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take
advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of
the complaint must accompany the merchandise. If our inspection verifies the
defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide
you with a replacement. We will return repaired products at our expense, but
if we determine there is no defect, or that the defect resulted from causes
not within the scope of our warranty, then you must bear the cost of returning
the product. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
26541 agoura road · Calabasas, Ca 91302 ·
1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>