HARBOR FREIGHT 42858 3 Inch Twisted Wire Brush Instructions
- June 6, 2024
- HARBOR FREIGHT
Table of Contents
WIRE BRUSH SAFETY
During operation, brush filaments will break off due to wear and fly out from the brush with great force along with materials removed from the workpiece. This can cause serious injury for the operator and others in the work area (up to 50 feet or farther from the operation). To reduce the risk of serious injury from flying wires and debris, the operator and others in the area must wear safety goggles with side shields or face shields and protective clothing.
WARNING
To prevent serious injury:
- Do not use with tool rated higher than 4,500 RPM.
- Wear ANSI-approved safety goggles or face shields, and heavy-duty work gloves during installation and use. Loose wires threw during use.
- Inspect before installing and every use; do not use if wires are loose, damaged, or worn. If wires come loose or are missing, discontinue use immediately and discard the wheel.
- Use as intended only. Use one tool with a spindle that matches the arbor and guards appropriate for wire wheels. Avoid applying heavy pressure to prevent wire breakage.
- Disconnect the tool from power before installing.
- Keep away from children.
SAVE THESE WARNINGS
Documents / Resources
|
HARBOR FREIGHT 42858 3 Inch Twisted Wire
Brush
[pdf] Instructions
42858, 3 Inch Twisted Wire Brush
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>