tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module User Guide

: June 6, 2024
: tyco

Table of Contents

Read User Manual Online (PDF format)
Download This Manual (PDF format)

PowerG
Qolsys Wired to Wireless
Upgrade & Expansion Module tyco W2W PowerG Qolsys Wired to Wireless
Upgrade and Expansion Module

Upgrade IQ2+ ﬁrmware to 2.5.3 or higher before enrolling in W2W

Enroll Module via auto-learn or by entering the PowerG ID manually (Starts with 460-XXXX)
New Option will be visible, Installation > Devices > Security Sensors

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 1

Step 1
Click the pencil symbol to edit or create the PGM rule

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 2

Step 2
Click Add

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 3

Step 3
Default View

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 4

Step 4
Enter your PGM Output Name

Choose Output type
— Normal
— Inverted

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 5

Step 5
Choose Action

Latching
Timer (1 second to 300 minutes)
— Choose seconds or minutes
— Scroll or enter the required duration

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 6

Step 6
Choose Trigger Type
— System
— Zone

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 7

Step 7
Choose System or Zone stat based on selection

System Options
— Disarm
— Arm Away
— Arm Stay
— Arm Stay Exit Delay
— Arm Away Exit Delay
— Arm Stay Entry Delay
— Arm Away Entry Delay
— Alarm
Zone Options
— Open
— Closed
— Star Button (Only available with PowerG 4 button key fobs)

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 8

Important Note: in ﬁrmware 2.5.3 only Door/Window contacts, key fobs and motion sensors can be utilized for zone trigger types. Other zone types will be released in future ﬁrmware releases.

Step 8
Click Add Rule to save your settings

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 9

✓ Best practice – All intrusion devices should be powered from AUX1 and all
Life Safety devices should be powered from AUX2.
✓ Partition on the PGM Output entry screen will only appear if Partitions enabled
✓ When utilizing a PowerG keyfob as a latching PGM, pressing the start button will also unlatch the PGM.
✓ Motion sensors will not allow the option for Latching action.
✓ Latching action will change the state when a contact opens or closes.
✓ To enable 2-Wire smoke functionalities on the W2W – Installation > Security Sensors

Add Sensor > enter the W2W PowerG ID – PGM2 is now enabled for 2-Wire Smoke
✓ When programming any smoke on the W2W, PGM2 will be locked as used by Smoke Detector.
✓ Multiple rules can be programmed to each PGM output, duplicate rules or conﬂicting rules on the same PGM output will generate the following;

tyco W2W PowerG Qolsys Wired to Wireless Upgrade and Expansion Module -
figure 10

For further information please refer to www.dsc.com and www.qolsys.com

About Johnson Controls
Johnson Controls is a global diversiﬁed technology and multi-industrial leader serving a wide range of customers in more than 150 countries. Our 120,000 employees create intelligent buildings, efﬁcient energy solutions, integrated infrastructure, and next-generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities. Our commitment to sustainability dates back to our roots in 1885, with the invention of the ﬁrst electric room thermostat.

© 2020 Johnson Controls. All rights reserved. Product offerings and speciﬁcations are subject to change without notice.
Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.
PN 300026088