My PowerGlide® Pet Vacuum with SuctionChannel Technology® Brush is not Turning | Support
- June 7, 2024
- Bissell
Table of Contents
If you’re experiencing issues in the Brush Area such as Brush Not Turning
follow these steps to resolve:
-
Your vacuum has a Brush ON/OFF switch
- Turn machine On > To activate Brush push the Brush button
- The machine must be reclined for the Brush to rotate
-
Is the Brush rotating?
- Yes > Great! Glad we could get you back to cleaning!
- No > Turn OFF & Unplug machine
- Recline Handle > Unscrew 7 Phillips head screws to remove Brush Access Plate
-
Pull the Brush out
-
Disconnect the Hose from the Lower Hose
- Unscrew the screws that secure the Lower Hose
-
Lay Lower Hose straight
- Push a broomstick through Lower Hose toward Brush area to clear all debris
-
Inspect Lower Hose, Belt and Brush Access Plate for damage
- If Lower Hose, Belt or Brush Access Plate are damaged > Replace the damaged part > Go to Parts & Supplies
-
Stand Brush on a flat surface
- Hold the top with one hand > Spin/flick the brush with your other hand > It should spin freely – (several times with one flick)
- If Brush does not spin freely > Replace Brush > Go to Parts & Supplies
-
Reinsert Brush into Belt
- If Belt needs to be reattached, loop it onto the motor shaft before attaching the Brush
- Stretch Belt until the Brush is secure in place
- Rotate Brush several times to align Belt correctly
- Reinstall Brush Access Plate and screws
- Reconnect the Lower Hose > Screw into place
-
Has this resolved the issue?
- Yes > Great! Glad we can get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Loading......