ADLER Camry Premium CR 7428 Electric Heating Pad User Manual
- June 6, 2024
- ADLER
Table of Contents
ADLER Camry Premium CR 7428 Electric Heating Pad User Manual
Product Overview
The product may be used only with the control switch specified in the equipment marking:
Read the Instructions
Do not use folded or comugated
Do not knock out pins, needless
or other objects.
Do not use for very small
children (0-3 years.)
Maximum washing temperature 30 C Normal process.
PLEASE READ CAREFULLY. IMPORTANT INSTRUCTIONS, KEEP FOR LATER USE.
-
Read the operating manual before using the device and follow the instructions contained in it. The manufacturer is not liable for damage caused by using the device against its intended use or improper handling.
-
The device is for domestic use only. Do not use for other purposes that are not in accordance with its intended use.
-
Connect the device to a 230 V ~ 50/60 Hz socket. In order to increase the safety of use, do not switch on many electrical devices simultaneously to one circuit.
-
Be extra cautious when using the device when children are nearby. Do not allow children to play with the device, do not let children or persons not familiar with the device use it. The equipment should not be used by young children, unless the controllers have been pre-set by parents or guardians, or children have been thoroughly instructed how to safely handle the regulators.
Children under three years of age cannot use this device due to the lack of response to overheating. -
WARNING: This equipment may be used by children over 8 years of age and persons with limited physical, sensory or mental abilities, or persons who have no experience or knowledge of the equipment, if this is done under the supervision of a person responsible for their safety or given to them. tips on the safe use of the device and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and maintenance of the device should not be performed by children unless they are over 8 years of age and are supervised. This device cannot be used by people who are not heat sensitive, and people who are very sensitive to heat, who are unable to respond to overheating and by people who require constant care.
-
Always after use, remove the plug from the socket by holding the socket with your hand. DO NOT pull on the power cord.
-
Do not immerse the cable, plug and the entire device in water or other liquid. Do not expose the device to atmospheric conditions (rain, sun, etc.) or do not use in conditions of high humidity (bathrooms, damp camping houses).
-
Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialist repair facility in order to avoid a hazard.
-
Do not use the device with a damaged power cord or the device is not working properly.
Do not repair the device yourself, as it may cause shock. Please return the defective device to the appropriate service center for inspection or repair. All repairs may only be carried out by authorized service points. Incorrectly performed repair can cuse serious danger to the user. -
Do not use the device near flammable materials.
-
Do not leave the device or the adapter connected to the outlet unattended.
-
To provide additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30 mA in the electrical circuit. In this regard, please contact an electrician.
-
Do not allow the device or adapter to get wet. If the device falls into the water, immediately pull the plug or adapter from the power socket. Do not put your hands into water when the device is connected to the mains. Before re-use, it must be checked by a qualified electrician.
-
Do not handle the device or adapter with wet hands.
-
The device should be turned off every time you put it down.
-
Do not use the device near water, for example: in the shower, in the bathtub or above the basin with water.
-
If the device uses a power supply, do not cover it, as it could lead to a dangerous increase in temperature and damage to the device. Always, first insert the plug into the power socket in the device and then the power supply to the mains socket.
-
Do not use the bed sheet in folded condition. Do not put pins, needles and other metal objects in the sheet.
-
Do not use the sheet if it is wet or damp. Leave the sheet hung loosely in a ventilated area until it is completely dry.
-
Do not put the power cord on a warmed sheet. Do not fold the equipment when it is placed on top during storage. Check the equipment periodically for signs of wear or damage.
If such signs or equipment are used improperly, please contact your supplier before continuing to use it. -
Store in a dry place. Never put heavy objects on the sheet.
-
Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.
-
Never cover the controller.
-
Before switching on the electric sheet, make sure that it is evenly distributed, there are no kinks or folds.
-
Product can be washed in the washing machine in 30°C temperature. Can be washed by hand. Disconnect the power cord and controller before washing. Switch or controller – the regulator must not be wet during washing, and during drying the cord must be in a horizontal position to ensure that the water does not flow into the switch or controller – the regulator.
-
Do not iron the device!
-
This equipment is not intended for medical use in hospitals.
-
The device should cool down before storage.
-
The device may be used only with the types of removable elements specified in the equipment marking.
-
Do not use the device on adjustable beds or if the device is used on an adjustable bed, check that the product and cord cannot get stuck or corrugated, eg on hinges.
-
The device is equipped with a fuse protecting against overheating, which should not work when used in accordance with the intended use of the equipment. If the fuse trips, the device will stop working, the equipment must be returned to the manufacturer or its representative for repair.
Product: Electric heating pad
BEFORE FIRST USE
- The product needs to be unfolded and laid flat before switching on.
- We recommend that you switch your product to the maximum setting for 30 minutes before bedtime then reduce to your desired heat setting. You must switch OFF prior to sleeping.
DESCRIPTION OF THE DEVICE – mechanical controller
- Temperature controller
- Power cord
- Bed sheet / blanket / mat
OPERATING INSTRUCTIONS – manual controller
- 1. Plug the power cord into an electrical outlet.
- 2. Active the product by moving the switch to position 1/2.
- 0 – switching off
- 1 – low, gentle heat, LED on
- 2 – high heat, diode on
- 3. Switch off the device that moves the switch to position 0.
STORING
Always allow the product to cool down before folding and storing. Your product can remain on the bed all year round as a comfortable under-blanket. Simply remove the controls and store until Winter. If you wish to remove the product from your bed when not in use, roll or fold it loosely and store in a bag. Avoid creating sharp creases in the product; for example do not store it under other items that may result in bending the inside heating wires.
CLEANING & AIR DRYING
The fabric cover can be hand or machine washed in 30 degree water temperature.
Unplug device , remove the fabirc cover. The fabric
cover is only one part that can be washed in water.
Fold and presoak the product for 15 minutes in a mild soap and lukewarm water
solution. Ensure the water temperature is less than
30°C.
- Wash on the delicate or gentle cycle for 2 minutes.
- Rinse in fresh lukewarm water.
- Gently stretch the product to its original size.
- Air dry over a clothes line. DO NOT use clothes pegs or clips of any kind.
- DO NOT use the product until it is completely dry !
- DO NOT iron the product !
TECHNICAL DATA
- Nominated power input: 45W
- Maximum power: 80W
- Supply voltage: 230 V ~ 50/60Hz
- Dimensions cm: 38 X38
To protect your environment: please separate carton boxes and plastic bags and
dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to
hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>