Associated Electrics 30137 Apex2 Hoonigan Kit Installation Guide

: June 13, 2024
: Associated Electrics

Table of Contents

Associated Electrics 30137 Apex2 Hoonigan Kit
Product Information
Product Usage Instructions
Introduction
Hardware – 1:1 Scale View
Tires and Body Build – Step 1
Tires and Body Build – Step 8
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Associated Electrics 30137 Apex2 Hoonigan Kit

Product Information

Specification

Brand : Team Associated
Product Type : Vehicle Kit
Assembly : Unassembled
Manufacturer : Associated Electrics, Inc.
Customer Service Contact : Tel: 949.544.7500, Fax:949.544.7501

Product Usage Instructions

Introduction
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through this manual to help familiarize yourself with the steps.

Vehicle Features
Your new kit comes unassembled. Refer to the manual for detailed assembly instructions.

Hardware Requirements
Refer to the website for suggestions on hardware and additional items needed to complete the kit.

Contact Information
Associated Electrics, Inc.
21062 Bake Parkway
Lake Forest, CA 92630
Customer Service Tel : 949.544.7500
Fax : 949.544.7501

Frequently Asked Questions (FAQ)

Q: Is the kit pre-assembled?
- A: No, the kit comes unassembled and requires building as per the provided instructions.
Q: Can I use different hardware than specified in the manual?
- A: It is recommended to use the specified hardware for optimal performance and compatibility.

Introduction

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets.

Vehicle Features

Factory Team fluid filled aluminum threaded shock bodies
Factory Team front universals
Factory Team adjustable blue turnbuckles
Front and rear adjustable sway bars
G10 2.5mm chassis
G10 shock towers
Center aluminum differential spool
Sealed front and rear differentials
Bolt on steering plates
Adjustable hook and loop battery straps
Injection molded brake calipers and rotors
Aluminum motor plate
POM-filled injection molded pivot balls
Sealed rubber ball bearings
Steel ring and pinion gears
Adjustable shock mounting positions
Front and rear independent suspension
Fully detailed replica body
Adjustable body post height locations
‘Shorty’ battery box

Additional
Your new Kit comes unassembled.

There are some items you will need to complete your kit (refer to website for suggestions):

Peak Detection Charger or LiPo Compatible Charger (Refer to website for complete listings)
2/3S LiPo battery pack w/High Current T Plug (shorty packs only) (Refer to website for complete listings)
Transmitter and Receiver
Servo (Refer to website for complete listings)
Motor (Refer to website for complete listings)
Servo Tape (AE# 6727)
AA-size batteries for transmitter
ESC (Refer to website for complete listings)
FT Tire Glue (AE# 1597)

Other Helpful Items

Silicone Shock Fluid (Refer to website for complete listings)
Green Slime Shock Lube (AE # 1105)
Thread Locking Compound (AE # 1596)
7 Piece Hex Driver Set (AE # 1650)
Calipers or a Precision Ruler
Silicone Diff Fluid (Refer to website for complete listings)
FT Tire Glue (AE # 1597)
Body Scissors (AE # 1737)
FT Hex/Nut Driver Set (AE #1519)
Reamer / Hole Punch (AE #1499)
Hobby Knife
Wire Cutters
Soldering Iron
Needle Nose Pliers

Associated Electrics, Inc. 21062 Bake Parkway Lake Forest, CA 92630

Customer Service Tel : 949.544.7500
Fax : 949.544.7501
http://www.AssociatedElectrics.com
http://www.instagram.com/teamassociatedrc/
http://www.facebook.com/TeamAssociated/

Hardware – 1:1 Scale View

Notes

This symbol indicates a special note or instruction in the manual.

This symbol indicates a Racers Tip.

There is a 1:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardware with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

Shock Build – Step 1

Shock Build – Step 2

Shock Bleeding Steps

Pull shock shaft down.
Fill shock body 3/4 full with silicone ﬂuid.
Slowly move the shock shaft up and down to remove air from under piston.
Wait for bubbles to come to surface.
Fill shock body to top with silicone ﬂuid.
Place a drop of oil in the cap and on cap threads.
Install cap and tighten completely.
Slowly compress shaft all the way to the top. If there is pressure at the top of the stroke, there is too much oil or air. You must bleed it out.
Slowly pull shaft out.
Unscrew the cap 3/4 turn and tilt the shock at a slight angle.
Slowly compress the shaft to push out excess oil and air. You should see bubbles coming out from under the cap.
With the shaft compressed, tighten the cap and re-check for pressure at the top of the stroke. If there is still pressure, repeat steps 9 thru11.

Shock Build – Step 3

Gear Diff Build – Step 1

Gear Diff Build – Step 2

Gear Diff Build – Step 3

Gear Diff Build – Step 4

Turnbuckle Build – Step 1

Turnbuckle Build – Step 2

Front / Rear Suspension Build – Step 1

Front / Rear Suspension Build – Step 2

Front / Rear Suspension Build – Step 3

Front / Rear Suspension Build – Step 4

Front / Rear Suspension Build – Step 5

Front / Rear Suspension Build – Step 6

Front / Rear Suspension Build – Step 7

Front / Rear Suspension Build – Step 8

Front / Rear Suspension Build – Step 9

Front / Rear Suspension Build – Step 10

Front / Rear Suspension Build – Step 11

Front / Rear Suspension Build – Step 12

Chassis Build – Step 1

Chassis Build – Step 2

Chassis Build – Step 3

Chassis Build – Step 4

Electronics Build – Step 1

Electronics Build – Step 2

Electronics Build – Step 3

Electronics Build – Step 4

Electronics Build – Step 5

Electronics Build – Step 4

Electronics Build – Step 5

Electronics Build – Step 6

Tires and Body Build – Step 1

Tires and Body Build – Step 2

Tires and Body Build – Step 3

Tires and Body Build – Step 4

Tires and Body Build – Step 5

Tires and Body Build – Step 6

Tires and Body Build – Step 7

Tires and Body Build – Step 8

Build 4 – Hoonicorn

Tires and Body Build – Step 9

Tires and Body Build – Step 10

Tires and Body Build – Step 11

Tires and Body Build – Step 12

FIND IT ON ASSOCIATEDELECTRICS.COM

Vehicle Spare Parts GO TO :AssociatedElectrics.com →Team Associated tab → Cars & Trucks → Scroll to your vehicles Parts & Accessories link

Setups and Manuals GO TO : AssociatedElectries.com →Team Associated tab→ Manuals & Setups → Seroll to your vehicle

AssociatedElectrics.com → Support → A-Team Apps

Associated Electrics, Inc. 21062 Bake Parkway Lake Forest, CA 92630 USA
call: 949-544-7500 – fax: 949-544-7501
Check out the following web sites for all of our kits, current products, new releases, setup help, tips, and racing info!

www.AssociatedElectrics.com

FOLLOW US ON SOCIAL MEDIA