Beyond Balance PSSE Tall Wood Bench Instruction Manual
- May 15, 2024
- BEYOND BALANCE
Table of Contents
PSSE Tall Bench Assembly Instructions
Material and Hardware:
(A): [8] 1.5″ silver #6 screws
(B): [1] top(C): [1] middle member
(D): [2] legs
Tools Required:
- Electric Drill/Impact with Phillips Bit
- Wood Glue*
Step 1: Align center with legs 1 and 2slots and insert (4) screws.
Step 2: Align lower assembly into slotson top and insert (4) screws.
Note: when installing any screws intopre-drilled holes make sure they
arestraight/level and not at an angle toprevent the tip of the screws from
pokingthrough any pieces.
Recommended to add a small amountof wood glue to each of the slotsAt Beyond Balance customer service is our top priority. If at any time you have any questions,comments or concerns please reach out to us at: 281-813-9999 or info@beyond-balance.net
Use of our products is at your own risk. By purchasing this product you are
assuming all responsibility for your own safety. As with all
exerciseequipment, any misuse of this product can result in injury, and by
purchasing this product you agree that you are liable for any action taken
withthe product. Buyer understands and agrees that the use of the goods
purchased from Beyond Balance may be dangerous to human safety, mayresult in
injury or death and present a risk of damage to property if not used properly.
You must routinely inspect your equipment for any wear or tear which can occur
after repeated use. We are not responsible for any mishaps, injuries or
damages resulting from your use of our products.As with any training program
or other physical activity performed on these items, there is a risk of injury
and proper supervision is required. Purchaser assumes responsibility and
acknowledgment of all risk factors. For more training and safety information,
we recommend online information fromqualified coaches, trainers, and therapist
or bringing some of your equipment to your gym/coach/trainer/therapist.
Follow and tag us at @GoBeyondBalance