Mi Portable Speaker BHR4802GL Instructions
- June 6, 2024
- Mi
Table of Contents
Mi Portable Speaker BHR4802GL Instructions
Read this manual carefully before use, and retain it for future reference.
Product Overview
How to Use
Charging
Charging the speaker when it ls off, the. indicator is orange and goes off
once fully charged. Charging the speaker when it is on, there is no charging
1nd1cat1on. Turning on the speaker when the battery is running low level, the
indicator blinks orange. Please recharge it soon.
Turning on
Press and hold the power button for 2 ,eons. the indicator will be blue for 1
second, then the Mi Portable Bluetooth Speaker is turned on. The speaker 1s
wa1t1ng for a connection when it is turned on for the first use.
Turning off
Press and hold the power button for 2 seconds to turn off the Mi Portable
Bluetooth Speaker.
Resetting
If there is any problem with the sound, Bluetooth or battery charging, press
and hold the power button for 12 seconds. The reset 1s completed after the
1nd1cator stays orange for 1 second.
Connecting
Connecting to a device
When the Bluetooth on your device
is disabled or the devising turned off, that aptamer will automatically enter
the awaiting connection mode.
True Wireless Stereo Function
The true wireless stereo function allows two Mi Portable Bluetooth Speaker to Connect with each other for wireless audio with stereo effect.
Enabling true wireless ,stereo function
Method A:
Connect speaker A with your device. Press the power button of the speaker A
twice to enter the true wireless steric pairing mode. Turn on the speaker 8,
make sure it is waiting for a connection and not connected to any devices. The
two speakers will them connect with each other automatically.
Method B:
Turn on two Mi Portable Bluetooth Speaker, and make sure the two speakers are
not connected to any devices Press either of two speakers’ power button twice,
the speakers will enter the true wirele9s stereo pairing mode and then connect
with each other automatically. Enable the unknot function on your device then
connect, your device with the speakers
Disabling true wireless stereo function To disable the true wireless stereo function, press twice the power button of either speaker.
Notes:
-
When the speakers are successfully connected to your device, the true wireless stereo function is enabled The speaker with the indicator staying bluer the right channel speaker, while the one with the 1nd1cator
blinking blue la the left channel speaker. operations like~ Play/Pause are available on both speakers . -
When the true wireless stereo function 1a enabled dung calls, only the right channel speaker works.
Button Instructions
Specifications
WEEE Information
http://www.mi.com/global/service/support/declaration.html
Safety Caution
- Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like .
- Replacement of a battery with an incorrect type that can defeat a safeguard (each as catching fire, explosion, leakage of corrosive electrolyte etc).
- Dispoi5al_of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas .
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Risk of explosion if battery is replaced by an incorrect type.
- Dispose of used batteries according to the instructions
- The product operation maximum ambient temperature is 40’C.
- The speaker can be used in tropical climates.
- No naked flame sources, such as lighted Candles, should be placed on the apparatus.
- Attention should be drawn to the environ, mental aspects of battery deposal.
To prevent possible hearing damage, do not listen at high volume levees for long periods.
The symbol indicates DC voltage
The marking information is located al the bottom of the speaker.
The Bluetooth’.) word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Tanilba Acoustic Technology Limited (a Mi Ecosystem company)
Address: Tianllao Building l-403, Tianliao Industrial Area A. Taoyuan Street.
Nanshan District Shenzhen 518055,
China
For further information. please go to www.mi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>