perle IDS-108GE 8 Port Industrial Gigabit Ethernet Switches Owner’s Manual

perle IDS-108GE 8 Port Industrial Gigabit Ethernet Switches

Product Information

perle.com/products/switches/ids-108ge-8-port-unmanaged-industrial-gigabit- switch.shtml](https://www.perle.com/products/switches/ids-108ge-8-port- unmanaged-industrial-gigabit-switch.shtml)
Description| Perle IDS-108GE Industrial Gigabit Ethernet Switches are
designed for easy deployment in industrial environments with harsh
operating conditions and limited space. They are suitable for
industrial automation, infrastructure, transportation, security,
oil and gas, and mining applications. These unmanaged switches
provide essential industrial Ethernet networking functionality and
can withstand extreme temperatures, surges, vibrations, and
shocks.
Features|

• 8-port compact DIN rail switches
• 8 x RJ45 ports with 10/100/1000 Mbps on all ports
• Redundant dual power input (12/24/48 VDC)
• Reverse polarity protection
• Fan-less design with no moving parts
• -40 to 75C industrial operating temperature support
• QoS (Quality of Service) prioritized messages

Product Usage Instructions

1. Mounting: The IDS-108GE switches are DIN rail mountable. A mounting kit is included for easy installation.
2. Power Input: Connect the dual power input using the provided 7-pin removable terminal block. The switches support 12/24/48VDC (9-55VDC) power input.
3. Network Connection: Connect your network devices to the 8 x RJ45 ports using Ethernet cables. The switches support 10/100/1000Base-T and auto-negotiation for convenient setup.
4. Power LED Indicators: Check the power LED indicators to ensure proper power supply. Power LED 1 and Power LED 2 should be green when power is applied.
5. Link and Activity Indicators: The RJ45 / SFP Ethernet LEDs indicate link status and activity. A solid green LED indicates an established link, while a blinking green LED indicates activity.

IDS-108GE Industrial Gigabit Switches

8-port Compact DIN Rail Switches

• 8 x RJ45 ports with 10/100/1000 Mbps on all ports
• Redundant dual power input 12/24/48 VDC
• Reverse polarity protection
• Fan-less design with no moving parts
• -40 to 75C industrial operating temperature support
• QoS (Quality of Service) prioritized messages

Perle IDS-108GE Industrial Gigabit Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed
to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-
108GE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.

These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.
For automation and industrial control systems using Ether Net/IP or PROFINET, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).

Specifications

Hardware & Technical Specifications: IDS-108GE Industrial Gigabit Switches

Interfaces

• RJ45
  • 8 x RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
  • Auto-negotiation
  • Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
  • Ethernet isolation 1500 V\
• Alarm Contact
  • One relay output with current 0.5A@30V

Power

• Dual Power Input
  12/24/48VDC (9-55VDC)

• Power Consumption
  5.55W max

• Maximum Current Consumption @ 24VDC
  0.16A @ 24VDC

• Power Connector
  7-Pin Removable Terminal Block

• Overload Current Protection
  2A fuse provides overload current protection

• Reverse Polarity Protection
  The positive and negative inputs can be reversed providing safe and simple power connectivity.

Switch Properties

• Standards
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX/FX
  • IEEE 802.3az Energy Efficient Ethernet
  • IEEE 802.1p Quality of Service (QoS)
• Processing Type
  • Store-and-Forward
  • Auto Negotiation
  • Half-duplex back-pressure and IEEE 802.3x full-duplex flow control
  • Auto MDI/MDIX
• MAC Address Table Size
• MAC Address Table Size 4K
• Packet Buffer Memory 1.5 Mbit
• Jumbo Frame Size 9216 bytes
  • Forward/Filtering Rate
  • 14,880pps for 10Mbps
  • 148,810pps for 100Mbps
  • 1,488,100pps for 1000Mbps

Indicators

• Power LED 1
  This LED is green when power is applied

• Power LED 2
  This LED is green when power is applied

• Fault LED
  This LED is red when a fault is detected

• RJ45 / SFP Ethernet LED
  These LED is solid green for established link and bllinks greenwhen activity is detected (per port)

Environmental Specifications

• Operating TemperatureRanges
  IDS-108GE: -10 to 60°C (14 to 140°F)
  IDS-108GE-XT: -40 to 75°C (-40 to 167°F)

• Storage TemperatureRange
  -40 to 85°C (-40 to 185°F)

• Operating HumidityRange
  5% to 90% non-condensing

• Storage Humidity Range
  5% to 95% non-condensing

• Operating Altitude
  Up to 3,048 meters (10,000 feet)

• Din Rail Mountable
  DIN Rail attachment included. Mounts to standard 35 mm DINrail in accordance with DIN EN 60175.

• Maximum Heat Output 18.926 BTU/Hr

• MTBF

  • 3093836 hours
    MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25°C

Product Weight and Dimensions

• Weight 0.336 Kg, 0.74 lbs
• Dimensions
  45x75x100mm (W x D x H)
  (1.77″x2.95″x3.94″)

Packaging

• Shipping Weight
  336g (0.74lbs)

• Shipping Dimensions
  45x75x100mm, 1.77″x2.95″x3.94″ (W x D x H)

• Contents Shipped
  Industrial Ethernet Switch with DIN Rail attachment
  Terminal block
  Installation guide

Standards and Certifications

• Safety
  UL 61010

• EMC Emissions
  FCC Part 15 Class A
  VCCI Class A
  EN 61000-6-4
  ICES-003
  EN 55032

• EMC Immunity
  EN 61000-6-2
  EN 61000-4-2 (ESD)
  EEN 61000-4-3 (Radiated RFI)
  EN 61000-4-4 (Burst)
  EN 61000-4-5 (Surge)
  EN 61000-4-6 (Induced RFI)
  EN 61000-4-8 (Magnetic field)

• Industrial
  EN 50121-4

• Environmental TestCompliance
  IEC 60068-2-6 Fc (Vibration)
  IEC 60068-2-27 Ea (Shock)

• Environmental
  Reach, RoHS and WEEE Compliant

• Other
  ECCN: 5A991
  HTSUS Number: 8517.62.0020
  5 year warranty

IDS-108GE Industrial Gigabit Switches

| IDS-108GE Industrial Gigabit Switch with 8 x 10/100/1000Mbps RJ45 Ethernet ports. -10 to 60C operating temperature.| None| 07017360
IDS-108GE-XT Industrial Gigabit Switch with 8 x 10/100/1000Mbps RJ45 Ethernet ports. -40 to 75C operating temperature.| None| 07017380

References

• 8-Port Industrial Gigabit Ethernet Switches | IDS-108GE | Perle
• Environmental Policy | Fiber & Serial to Ethernet | Perle
• 8-Port Industrial Gigabit Ethernet Switches | IDS-108GE | Perle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>