HARBOR FREIGHT 63586 Pittsburgh 6 Inch Composite Digital Caliper Owner’s Manual

: June 6, 2024
: HARBOR FREIGHT

Table of Contents

Specifications
IMPORTANT SAFETY INFORMATION
Components and Controls
Operation Instructions
Limited 90 Day Warranty
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
21a

PITTSBURGH®
6″ Composite Digital Caliper
63586

Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

WARNING
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Specifications

Display Units	Inches & Millimeters
Accuracy	±0.01″ (0.2mm)
Display	0.01″ (0.3mm)
Power Supply	LR44 Button Battery (Included)

IMPORTANT SAFETY INFORMATION

Keep out of your child’s reach. Discard button batteries carefully. Do not allow children to play with devices that contain button batteries. This product is not a toy.
Wear ANSI-approved safety goggles during use.
Keep work area clean and well lit.
Do not operate when tired or when under the influence of alcohol, drugs or medication.
Use as intended only.
Inspect before every use; do not use if parts are loose or damaged.
Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Components and Controls

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before use of this product.

Before turning on the caliper, remove the tab located under the battery cover.
Push the OFF ON button to turn caliper on.
To toggle measurement between inches and millimeters, press in/mm button.
With jaws closed, press ZERO to set readout to 0.
To measure outside of object, set the bottom prongs outside object being measured. Slide the jaws together until they gently contact the item.
To measure inside of object, set the top prongs inside object being measured. Spread prongs apart until they touch surface of object.
To measure an object’s step, place the sliding jaw on the upper step of the workpiece, then spread the prongs apart until the fixed jaw contacts the lower step.
When finished, press OFF ON button to turn off Caliper.
To replace battery, open battery compartment to right of display, install new LR44 battery positive (flat) side up, and slide Battery Cover back into place.

Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Replacement parts are not available. Reference UPC 193175345486.

PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

26541 Agoura Road · Calabasas, CA 91302 · 1-888-866-5797
For technical questions, please call 1-888-866-5797.
Item 63586