Fusion Wireless Mechanical Keyboard User Manual
- June 6, 2024
- FUSION
Table of Contents
Fusion Wireless Mechanical Keyboard
User Manual
ABOUT DEVICE
SHORTCUT KEYS
| Fn + Q| Switch to Bluetooth device 1
---|---|---
| Fn + W| Switch to Bluetooth device 2
| Fn + E| Switch to 2.4GHz wireless connection mode
| Fn + R| Switch to USB connection mode
| Fn + Backspace| Invoke the on-board configuration profile
WIRELESS SWITCH
INDICATOR LIGHTS
Indicator Light| Normal Indicator Status | Wireless Connection Status
Indicator *
---|---|---
A| Caps lock indicator| Bluetooth device 1 connection status indicator
| Configuration profile indicator| Bluetooth device 2 connection status
indicator
| Battery indicator| 2.4GHz wireless connection status indicator
*When Fu940Nis sucoesfully connected and functions normally, the indicators lights should also work normally.
**When FUSION pairing is available, the corresponding indicator light flashes
quickly.
When FUSI0Ni is paired but cannot connect, the corresponding indicator light
flashes slowly. Please check if When FUSION is successfully connected and
functions normally.
When FUSION is successfully connected, the corresponding indicator light will
be on for 3 seconds and then revert back to the normal indicator status.
CONNECTION SPECIFICATIONS
KEYBOARD
BLUETOOTH| Frequency range:2402MHz-2480MHz Transmitter power: < ldBm
2.4GHz WIRELESS| Frequency range:2402MHz-2480MHz Transmitter power: < 3.5dBm
RECEIVER
2.4GHz WIRELESS| Frequency range:2402MHz-2480MHz Transmitter power: < 3.5dBm
BLUETOOTH CONNECTION
1.
2.
Enter Bluetooth mode by pressing FN+OW.
3. The corresponding indicator light flashes quickly upon initial use.
Search for FUSION on a device that supports Bluetooth low energy technology
and complete the pairing according to the on-device prompts. The corresponding
indicator light will be on for 3 seconds and then revert back to the normal
indicator status. If re pairing is needed, long-press FN+Q/W for 3 seconds
until the indicator light flashes quickly, and then users can proceed with
repairing.
2.4 GHz WIRELESS CONNECTION
1.
2. press the right side of the logo, swipe towards the left and remove the
wireless receiver.
3. Plugin the wireless
receiver.
**4.**
Press FN+E to enter 2.4GHz wireless connection mode, after which the device will connect automatically. The indicator light will be on for 3 seconds and then revert back to the normal indicator status.
USB WIRED CONNECTION
-
Plugin the USB cable.
Press FN+RR to enter USB wired connection mode.
LEARN MORE
Check out www.durgod.com and download “Durgod Zeus Engine” to get:
- The latest firmware updates
- Entire key customization
- Macro editing function
- On-board and cloud storage of configuration profiles
- The latest information on Durgod products
http://weixin.qq.com/r/TyiwqBbE3kuhrVLL931d
Zhuhai Hoksi Technology CO,LTD
Room803,N0.3 building,N0.6,Pingbei 1Road,Nanping;Technology & Industry
Park,Xiangzhou
District, Zhuhai City, China
Service Email:[email protected] Support
Email:[email protected]
Copyright 0 2017 Zhuhai Hoksi Technology CO., LTD.ALL rights reserved. All
copyrights or trademarks are the property of their
respective owners. This manual is for reference only, does not constitute any
form of commitment.
REGULATORY AND COMPLIANCE INFORMATION
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/11/ technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided
with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation Is subject to
the following two conditions:
- this device may not cause harmful Interference. and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Zhuhai Hoksi Technology LTD., CO declares that the radio equipment
type DURGOD K230 Wireless Mechanical Keyboard is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: http://www.durgod.com
CAUTION:
- Risk of fire or explosion or defeat the safeguard of equipment if the battery is replaced by an incorrect type. Replace only with the same or equivalent type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- High or low extreme temperatures or low air pressure at high altitudes that the battery can be subjected to during use. storage or transportation.
- Leaving the battery at an extremely high temperature and/or low air pressure surrounding the environment can result in an explosion or the leakage of flammable liquid or gas.