Energizer UB2605 True Wireless Bluetooth Earbuds User Manual
- June 6, 2024
- Energizer
Table of Contents
Energizer UB2605 True Wireless Bluetooth Earbuds User Manual
Safety Instruction
- Avoid water, heat, fire, penetration of the battery, and severe drops at all times.
- Do not insert other objects into the USB ports other than the USB connectors.
- Once the product is fully charged, your power pack automatically shuts off to save power.
- During charge & recharge, battery may feel slightly warm.
- Do not clean the battery with water or other cleaning products, clean the exterior with a lightly wetted cloth or napkin
- Any intentional and physical damage to the battery will not be under the warranty conditions
- Battery storage temperature is between -10°C-+60°C, operating temperature is 0°C-45°C
- Fully charge the battery before first use to maximize the battery life.
- Recommend to recharge your power bank with a wall charger/adapter.
- For better performance, avoid recharging the power bank while your device is connected to it.
- Dispose of battery properly; ask local disposal facility for advice.
- Do not disassemble, damage or incinerate the battery at any time.
- Please use the original accessories such as charging cable and adapter for better performance.
Package Content
-
Charging Case
-
Energizer Earbuds
-
Gel tips×3 (total 3pairs in the package)
-
User manual
Product Introduction
How to Use
Power On: Take the earbuds out of the case, the power will turn on automatically. You can also turn on the earbuds manually by touch and hold the MFB button for 3 seconds, the white LED light will turn on for 2 seconds, a beep sound indicates the power is on. Power Off: Put the earbuds out of the case, the power will turn off automatically. You can also turn off the earbuds manually by touch and hold the MFB button for 3 seconds, the white LED light will turn on for 2 seconds, a beep sound indicates the power is off. Low Battery: The red indicator on the earbuds will turn on.
LED LIGHT Indicator:
Earbuds LED Light Indicator
Pairing Mode:
|
Mashing white and red light
---|---
Earbuds Connected:| Red and white light flash slowly
Battery Low:| Flashing red
Charging:| Red light on
Charging finished:| White light on
Charging Box LED Light Indicator
Charging:
|
Flashing white
---|---
Charging finished:| White light is on
1 LED On:| Battery level 0-25%
2 LED On:| Battery level 25%-50%
3 LED On:| Battery level 50%-75%
4 LED On:| Battery level 75%-100%
Pairing Instruction
Take the 2 earbuds out of the box, they will automatically pair first. The red
and white indicator will flash, pairing takes about 5 seconds. The indicator
on the left earbud will turn off, the red and white indicator on the right
earbud will flash slowly indicating the pairing is completed.
Turn on the Bluetooth on your phone, connect to “Energizer_UB2605”. Open your
phone music player app and play, you can enjoy music wirelessly.
Auto-Connect
Secure Pairing: If the Bluetooth device connected to the headset runs a
version lower than version 3.0, a password is required. Enter the default
security code 0000 to pair the earbuds with your device.
Automatic Power-Off: pairing mode lasts for 5 minutes, if the pairing fails,
it will be automatically turn off in 5 minutes to save power. When the battery
is low, earbuds will turn off automatically.
Button Operation
Double-click to switch to next(R) or previous(L) music.
- Touch 1 time during music mode or calls: Play/Pause or Answer/Hang up
- Touch 2 times and hold: Adjust the volume (hold after the second touch). Touch the right earbud to increase in volume, a notification sound means you’v reached the maximum volume. Touch the left earbud to decrease in volume, no sound means you’ve reached the lowest volume.
- Touch 2 times: Redial
- Long press 2 seconds: Reject a call/Activate or turn off phone voice control
- Long press 10 seconds: Turn off mode/Reset previous pairing information
How to Charge:
DC 5V 1A USB output can charge your smartphone.
How to Recharge:
Connect the charging cable to the box and connect to a power outlet to
recharge.
Specification
- Model Name: UB2605
- Cell Type: Lithium Ion
- Battery Capacity: 2600mAh/ 9.36Wh
- Single earbud capacity: 40mAh
- Rated Input: 5V/ 1A (Max.)
- Rated Output: 5V/ 1A (Max.)
- Bluetooth Version: 5.0
- Impedance: cD6mm 32Q
- Transmission distance: 10M
- Frequency Range: 20Hz-20KHz
- Protocols: HSP/ HFP/ A2DP/ AVRCP
- Dimensions: 84(L) x 56(W) x 33(H)mm Weight : 104g±5g
WARRANTY
AI products from the date of purchase are qualified for limited time warranty. For more warranty information, please visit: http://www.energizerpowerbanks.com
PowerSafe Managemen t
Guarantees against short circuit and over-charging for your power bank and
devices.
Customer
Service
For any question about the product, please contact us at
service@energizerpowerbanks.com
RF Exposure Compliance Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment)
This making shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this
product or their local government office for details of where and how they can
take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for
disposal.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Dispose the battery properly, seek for local disposal facility for advice. Do not dispose, dissemble, damage, or incinerate the battery at all time.
© 2021 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by TennRich International Corp. All other brand names are trademarks of their respective owners. Neither TennRich International Corp. nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.