sygonix SY-PS-400 Smart Wi-Fi Socket Strip with 4 USB Charging Ports Instruction Manual

: June 6, 2024
: Sygonix

SY-PS-400 Smart Wi-Fi Socket
Strip with 4 USB Charging Ports
Item No. 2226163
App Instruction Manual

Conrad Connect

www.conradconnect.com

Introduction

The connected device works through a Wi-Fi network together with the “Smart Life – Smart Living” app. This mobile app allows you to control, manage, and receive alerts on devices connected to your network.

General Information

Important Information

**** Observe the information in a red frame to avoid harming yourself or others, and prevent product damage.
Give information in an orange frame special attention.
The blue frame provides tips on product use and features.

Conrad Connect

Your product is compatible with the Conrad Connect IoT platform and is powered by Tuya. Device integration with Conrad Connect requires a Conrad Connect Account. You can set up an account at the following URL: www.conradconnect.com

Legal Notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems requires prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.

Requirements

Security

It is strongly recommended that you set up your Wi-Fi Router/Wi-Fi Access Point (AP) to use the most secure encryption option it supports.

App to Device Connection

To add a new device to the app, the mobile device that runs the app and the smart device must be connected to the same WiFi network.
You can control the smart device through the app via Wi-Fi or using mobile device data.

Safety

**** Remind yourself of the possible dangers the device you intend to connect can pose to your environment.

**** Read the instruction manual that came with the product you are going to connect to the smart device to find out if it is suitable to be operated without attendance.
If it is not, then do not use it in conjunction with timer and schedules.

A heater can cause a fire if left unattended!
A kettle that contains no water may cause a fire!
A coffee maker may overheat if not turned off on time and cause a fire!

Mobile App

Please note that the following instructions may change for future app versions.

Getting Started

First-time users should follow these steps:

Download and Install the App.
Create a User Account.
Log In.
Add Device.

Download and Install the App

App Installation

Apps are available for Android and iOS mobile devices.
Visit the respective app store and search for “Smart Life – SmartLiving”, or scan the QR code shown here.

http://e.tuya.com/smartlife

Make sure your mobile device satisfies the minimum requirements as outlined on the app store download page.

User Account

Your account settings are stored in the cloud.

Create a User Account

A user account is required for you to operate the device.

Select Register to create an account.
Log In.
You will then be taken to the “Home Page”.

Home Page

The home page lists all devices that are under your account’s control. When you log in for the first time, the device list will be blank.

Swipe down from the top of the screen to refresh the page.

A1 Access to “Home Management” settings, where you can name a home, set the home location on a map, and assign/add new devices to each room.
A2 Enter a room to view or add devices.
A3 View all devices at once.
A4 Adds a new device; identical with A14
A5 Return to “Home Page” view
A6 Access “Tap-to-Run” and “Automation”.
A7 Access your profile and settings.
A8 Manage your rooms and assigned devices.
A9 Remove one or all devices.
A10 Switch between list and grid view,
A11 Access submenus, see items A8, A9 and A10
A12 Displays location information such as current temperature, humidity, air pressure and wind speed.
A13 Voice control.
A14 Adds a new device; identical with A4

Add Device

Familiarize yourself with the product before setting it up. Refer to the product operating instructions for further information. Connect your mobile device to a Wi-Fi network.

Add a device by selecting Add Device or the icon.
Select Electrician → Socket (Wi-Fi).
Follow the on-screen instructions to complete the setup process.

Overview

B1 Power strip On/Off
B2 Socket 1 On/Off
B3 Socket 2 On/Off
B4 Socket 3 On/Off
B5 All USB sockets On/Off
B6 Settings
B7 Schedule
B8 Countdown
B9 Electric: View energy consumption
B10 Rename sockets

Settings

Change Device Name

From the “overview” screen select … > .
Enter a new device name.

Connect with Amazon Alexa or Google Assistant

From the “overview” select ….
Select an option under “Third-partyControl”.
Follow the on-screen instructions to complete the setup process.

To share access to a device e.g. with a family member:
1. From the “Overview” screen select **>** Share Device.
2. Follow the onscreen instructions.

Remove Device

The socket must be removed from your device before it can be used with a new account you have not “shared” with. E.g. If giving it to a third party. From the “overview” select … > Remove Device.

Offline Notification

Receive a notification if your device goes offline.
From the “overview” select … > Offline Notification > toggle on/off.

Create Groups

Devices under the same group can be controlled all at once.
1. From the “overview” select … > Create Group.
2. Follow the onscreen instructions.

Push Notifications

To receive notifications, notifications should be enabled in the app and in your mobile device notification settings.

From the “Home Page” view select Me > Settings > App Notification.
Set your notification settings as required.

FAQ

Visit a list of frequently asked questions here: From the “Overview” select …

FAQ & Feedback.

Troubleshooting

App cannot connect to the device
This may be due to a weak Wi-Fi signal or an interrupted connection.

Check that your internet connection is working correctly. Check cables, routers, and connections. Restart network devices if necessary.
Check that the device is within range of your Wi-Fi access point. Use of other 2.4 GHz products e.g. wireless networks and microwave ovens may cause interference.
You may need to set up a wireless repeater to improve the connection.
If the device is battery powered, it may need to have the batteries replaced.

Resetting the device
Resetting a device may help resolve erratic behavior such as connection problems.

Insert the included reset pin into the reset hole.
Press down until you feel a “click” then hold 4-5 seconds until you hear an audio prompt.
If needed, repeat steps to “Add device”.