atomi AT1229 LED Bathtub Light User Guide
- June 9, 2024
- atomi
Table of Contents
atomi AT1229 LED Bathtub Light
Atomi LED Bathtub Light User Manual
The Atomi LED Bathtub Light is a high-quality waterproof light that can be attached to the side of the bathtub using the attached suction cup. It comes with a remote control that allows you to control the color of the light’s output. The LED light is sealed by a silicone gasket and it is important to tighten the cap before putting it underwater. The remote control is not waterproof, so it should be kept away from water.
product Specifications
- 100% waterproof
- LED bathtub light
- Remote control included
- Working radius in water: 1-3 meters or up to 10 feet
- Working radius out of water: 8 meters or up to 20 to 30 feet
product Package Contents
- LED Bath Light
- Remote Control
- User Guide
Usage Instructions
- Remove the plastic tab from the battery of the remote control.
- Attach the LED bathtub light to the side of the bathtub using the suction cup.
- Turn on the LED bathtub light using the on button on the remote control.
- Use the colored buttons on the remote control to change the color of the light output.
- Use the flash button to change multiple colors and then use the top-left buttons ( + and – ) to control the speed of the flashing colors.
- Use the strobe button to strobe the color white and then use the top-left buttons to control the brightness of the strobe light.
- Use the fade button to fade multiple colors and use the top-left buttons to control the brightness of the fading light.
- Use the smooth button to flash through green, blue, and red. The top-left buttons will also control the brightness of these colors.
- When finished, turn off the LED bathtub light using the off button on the remote control.
Thank you for purchasing the Atomi LED Bathtub Light!
You can now control the color of the water and create a light show while you
relax in the bathtub!
This light is made of high-quality waterproof materials and has an attached
suction cup to keep the light connected to the side of the bathtub. It also
includes a remote to allow you to control the color of the light’s output.
Tip: The LED light is sealed by a silicone gasket. Please tighten the cap
before putting it underwater.
Package Contents
- A. LED Bath Light
- B. Remote Control
- C. User Guide
Specifications
-
Dimensions:
2.7in × 1.1in -
Light Battery:
3 x AAA battries (Not Included) -
IR Remote Battery:
1 x CR2025 Button Cell Battery (Included) -
IR Remote Controller:
Includes 16 different static colors and 4 function modes.
Note: IR Remote Controller is not waterproof.
Do not mix old and new batteries.
Do not mix alkaline, Version Date: 04/22 standard, or rechargeable batteries.
Remote Details
- Remote must be pointed directly at device.
- Remote working radius in water is 1-3 meters or up to 10ft.
- Remote working radius out of water is 8-meters or up to 20 to 30 feet.
Remote Instructions
First, you will need to make sure you remove the plastic tab from the battery
of the remote. Once the tab is removed, the remote will then work. 