ADLER CR 2323 Camry hair Streaghtener User Manual

: June 6, 2024
: ADLER

Table of Contents

SAFETY CONDITIONS
DESCRIPTION OF THE DEVICE
USING THE DEVICE
- TEMPERATURE LOCK
- AUTOMATIC SAFETY SHUT-OFF
CLEANING
TECHNICAL DATA
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

ADLER CR 2323 Camry hair Streaghtener

SAFETY CONDITIONS

IMPORTANT INSTRUCTIONS ON SAFETY OF USE
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The appliance is intended for domestic use only. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions (bathrooms, cabin houses).
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly.
Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never use the product close to combustibles.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
If using the device in bathroom after use remove the power plug from the power socket, because water proximity presents risk, even if the device is turned off.
Do not allow the device to wet. If the device falls into water, immediately remove the power plug from the power socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.
Do not touch the device with wet hands.
The device has to be turned off after every use.
Do not leave device unattended when plugged in.
Keep the device out of the reach of children. Using the devices by children must be supervised by adults.
The power cord should not touch hot parts of the device and should not be located near other heat sources.
Do not wrap electric cable around the device.
Do not use the appliance in the bath.
Do not remove dust or foreign bodies from the inside of the device using sharp objects.
Do not use outdoors or where aerosols are being used or where oxygen is being administered.
Do not cover the appliance, it might cause the accumulation of heat in its interior and it may cause damage or fire.
Hairsprays contain flammable materials. Do not apply them while using the device.
Do not use the device on people who are sleeping.
During operation, do not put the device on a wet surface or on a surface that is sensitive to heat and high temperatures.
After use, turn off and unplug the unit. Wait until the device cools down before storing.
The heating elements reach high temperatures during operation. Do not touch hot parts of the device with bare hands and do not allow it to come into contact with the scalp, as this may cause burns.
The device is not intended to be operated with external timers or a separate remote control system.

DESCRIPTION OF THE DEVICE

Power button/ temperature control
Control lights: 130ºC – 150ºC – 170ºC – 190ºC – 210ºC
Handle
Ceramic coated crimping plates
Swivel power cord
Hook for hanging

USING THE DEVICE

To achieve the best results in hair crimping, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use the correct temperature setting for your hair type.

Before starting the electrical wire should be fully unrolled.
Insert the plug into the power socket.
Press the power button (1) until the device turns on and LED control light (2) will switch on.
Adjust the temperature using the temperature control button (1). During heat up the LED control light will stay red. When the appliance reaches the desired temperature, LED control light will change to green.
Starting from the top of the head choose a small strand of hair and straighten it and comb.
Then put it between the plates (4) and clamp. Hold down for 3 seconds, and then release the clamp.
Continue crimping down the length of your hair until the entire hair band is crimped. NOTE: The device is hot during operation. Do not touch the plates to the scalp or hands.
Repeat with the next strand until all the hair bands are crimped.
After finishing work, turn off the hair crimper. Press power button twice (1) to disable temperature lock and then press and hold for about 3 seconds until the LED control light turns off. Then unplug the power cord from the outlet.

TEMPERATURE LOCK

Device has temperature lock function. If hair crimper is not responding it means that you need to disable the lock function. Do it by quickly pressing the power button (1) twice.
NOTE: If you feel that hair crimper is not responding, always try to disable lock function.

AUTOMATIC SAFETY SHUT-OFF

After approximately one hour, the device will automatically shut itself off. To reactivate the device, press power button (1) until the unit turns on and LED control light (2) will switch on.

CLEANING

Before cleaning, remove the plug from the socket and wait until hair crimper cools down.
Hair crimper should be cleaned with a damp cloth. Do not submerge in water or other liquids.
Do not wind the power cable over the device.

TECHNICAL DATA

Voltage: 220-240V ~ 50Hz
Power: 68W
MAX Power: 150W

Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.