ADLER AD 6020 Electric Oven with Heating Plates User Manual
- June 6, 2024
- ADLER
Table of Contents
- ADLER AD 6020 Electric Oven with Heating Plates User Manual
- I. INSTRUCTIONS FOR SAFE USE
- II. DETAILED SAFETY CONDITIONS
- III. WARNINGS / DETAILED SAFETY CONDITIONS
- DESCRIPTION:
- BEFORE SWITCHING ON
- USING THE HOT PLATES
- USING THE OVEN
- USING ROTARY SPIT
- GRILLING/BAKING
- CLEANING AND MAINTENANCE
- TECHNICAL DATA:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ADLER AD 6020 Electric Oven with Heating Plates User Manual
AD 6020
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Dear Customer
Thank you for buying ADLER products.
AD6020 is an appliance intended to warm up or prepare meals.
ATTENTION:
This appliance is intended for household use only.
This appliance is NOT intended for commercial/professional use.
This appliance MUST NOT be used outdoor.
Attention! Before using this appliance carefully read this manual to avoid the risk of accidents and to ensure proper use of the appliance. Keep and store the manual so as to ensure easy reference in the future. The manufacturer shall not be held reliable for damage caused by misuse or improper operation of the appliance.
I. INSTRUCTIONS FOR SAFE USE
- Before using the appliance check if the voltage indicated in the data plate corresponds to the local power supply parameters. Remember that AC stands for “alternating current” while DC stands for “direct current”.
- Unwind and straighten the power cord
- Make sure that the power cord and the plug have no visible signs of damage
- Make sure that, before and during use, the power cord is not routed above naked flames or other source of heat or hung over sharp edges which might damage the cable insulation.
- Periodically check the condition of the power cord. If damaged the power cord should be replaced by an authorized repair facility to avoid danger.
- Before the first use remove all the packaging elements. Attention! Where the casing is composed of metal parts, such parts may be covered with a protection film which is hardly visible. The film should be removed too.
- This appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities unless they have been given supervision of authorized or experienced persons always in accordance with this manual
- The appliance is intended for operation with external time switches or separate remote control systems.
- The appliance can only be connected to an earthed 220-240V~50/60Hz socket CAUTION: This appliance is not intended for use by children under the age of 8 or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge of the equipment, unless they have been given supervision or instruction concerning the use of the equipment and the related hazards by a person responsible for their safety and they are aware of the danger related to the operation of the equipment. Children should not play with the equipment. The equipment must not be cleaned or maintained by the children unless they are not under the age of 8 and the activities are supervised
- Do not leave the appliance unattended when in use.
- Do not use the appliance near inflammable materials.
- Power cord must not hang over a table top or touch hot surfaces.
- Do not immerse the appliance or the power cord in water or any other liquid.
- Do not expose the appliance to weather conditions (rain, sunlight etc.) or use it in elevated humidity conditions (bathrooms, damp holiday cottages) .
- When the appliance is not in use it should always be unplugged from the power socket
- Do not remove the power plug from the socket by pulling the cord – grip the plug instead.
- The manufacturer shall not be held liable for damage resulting from improper use of the appliance.
- Remember that some parts of the appliance and the housing may become hot during operation. Therefore, pay special attention and do not touch them to avoid burns.
- Always operate the appliance on a dry and stable surface
- NEVER cover the appliance when in use or until it has cooled down.
- Remember that it takes time for the heating elements to cool down completely
- The appliance is a 1st class fire protection device and, therefore, it must be connected to a power socket with an earthing prong.
- .Provide sufficient space around and above the appliance when in use. During the operation the appliance must not come in contact with any inflammable objects such as decorations, paper towels, curtains, clothes etc.
- TAKE CARE when using the appliance on surface sensitive to high temperature. In such a case use insulating pads.
- Do not use this appliance with external time switches or any other remote control systems. To enhance your safety it is recommended that the wiring system be equipped with an automatic residual current device with the tripping current of 30 mA
II. DETAILED SAFETY CONDITIONS
- Use this appliance indoor only.
- Do not use aggressive detergents e.g. cleaning emulsions, cream cleaners, cleaning pastes etc. as they may remove the graphic symbols such as designations, warning signs etc.
- Do not put empty containers or dishes on the appliance.
- Do not use the electric cooker as a space heater or to warm inflammable, explosive, noxious, volatile materials or liquids.
- Do not use accessories which are not recommended by the manufacturer as they may be dangerous to the use or pose the risk of damage to the appliance itself.
- Never move the appliance by pulling the power cord. Make sure that the power cord is not obstructed in any manner. Do not wrap the power cord around the appliance or kink it.
- Never move the cooker when boiling water or with a hot cookware on it.
- Make sure the appliance has cooled down before storing it.
- Do not place the appliance so that the heating plate could contact other appliances (e.g. mixers). Do not put the cooker below the power socket
- Place the cooker at least 30 cm away from the wall, furniture, other equipment, containers. Make sure that sheer curtains, curtains, clothes or other inflammable materials cannot come closer than 30 cm away from the cooker as this may cause fire.
- Never place containers made of PVC, paper, cardboard etc. on the heating plate.
- Do not touch the housing or the heating plates of the cooker when in use. During the operation use the knobs only. After turning the cooker off wait until it has cooled down.
- Temperature of accessible surfaces of the appliance can be high when in operation. Do not touch the hot surfaces of the appliance.
- Children of the age 3 to 8 may turn the appliance on or off only when the appliance is in its normal operating position and they are supervised or have received instructions about safe use and understood the related hazards. Children of the age 3 to 8 must not connect, operate, clean or maintain the appliance .
- The appliance should be stored together with the power cord out of the reach of children under 8 years of age.
III. WARNINGS / DETAILED SAFETY CONDITIONS
-
Never use the appliance if damaged or malfunctioning.
-
Do not operate the appliance after it has been dropped or shows clear signs of malfunctioning.
-
Do not use extension cords or other electrical sockets which do not meet the standards in force or electrical regulations
-
Any repairs, disassembly or replacement of any parts should always be carried out by professional service facility.
-
If the appliance or parts such as electrical contacts, plug or power cord have got wet dry the appliance and its components before used.
-
Never operate the appliance with wet hands.
-
When you suspect that the appliance has been damaged NEVER try to repair it on yourself.
-
Do not wash the appliance under running water or so that water could penetrate it.
-
The oven should be put on a flat, temperature resistant surface away from flammable materials (curtains, drapes, wallpaper, etc.). In order to ensure proper air circulation there should be at least 30 cm of free space on each side of the unit and at least 30 cm above the oven. Do not cover the ventilation holes of the oven, as this may cause overheating and damage.
-
Do not use the oven with the door open. Do not cover the machine during operation,
nor put any items. -
Do not touch the hot surfaces of the oven (door, top or bottom wall and side walls). Use protective gloves to remove or touch any hot parts.
-
During operation, door glass becomes extremely hot. It must not be heavily hit, or pour cold water because of the risk of its crack.
-
The power cord can be installed over an oven, and should not touch or be near hot surfaces. Do not place the oven under the electrical outlet.
-
Due to the high temperature keep special carefulness when removing tray or grate (or other accessories approved for use in ovens) with baked dishes. Please be careful, when removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the oven or heat-resistant oven gloves.
-
Oversized food must not be inserted, as this may cause fire and damage the appliance.
-
Do not place any cardboard, paper, plastics and other flammable or easily melt objects in the oven.
-
Do not store any other accessories in the appliance.
-
After cooking and before cleaning the machine, unplug the power cord from the outlet and leave to cool. Wait a long period of time because the heated oven cools very slowly.
-
Clean the device after each use.
-
Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the casing. They can wipe off the graphic signs on the surface such as scales, marks, warning signs etc.
-
Do not wash metal parts in the dishwasher, as the corrosive detergents used in these devices cause darkening of the above parts. It is recommended to wash them by hand, using traditional dish washing liquids.
-
To avoid overheating of the oven the crumb tray or any other part of the oven should not be cover with a metal foil.
-
Do not use metal scouring pads to clean. Broken metal pieces may come into contact with electrical parts, creating a risk of electric shock.
DESCRIPTION:
- Temperature adjustment knob
- Heating mode selection knob / power button / OFF
- Heating plate selector knob
- Timer
- Indicator lamp
- Handle for opening glass door
- Baking tray
- Grill
- Rotary spit axis
- Tray removal handle
- Spit removal handle
- Spit jaws (2 pairs)
A. Big Hot plate B. Small hot plate
C1. Indicator lamp (small hot plate) C2. Indicator lamp (big hot plate)
BEFORE SWITCHING ON
- Make sure the oven is placed on high-temperature resistant base
- Make sure there Is enough ventilation space around oven (minimum 30 cm on each side and 30 cm above the oven)
- Make sure the oven is dry
USING THE HOT PLATES
- Plug the cord into the power source.
- Place a flat-bottom container on the hot plate (A)or (B). It is recommended to use containers with the surface area equal to or greater than the surface area of the hot plate in order to avoid energy loss. Place only the container that has a clean and dry bottom on the clean and dry hot plate.
- Set the hot plates selection knob (3), depending on the desired usage: – left hot plate (3a) – right hot plate (3b) – both hot plates (3c)
- Set the timer (4) to the desired cooking time. The bell will ring when the cooking time is completed.
- To deactivate the appliance, turn the timer knob (3) to “OFF.”
- The control light (C1) (C2) indicates when the hot plates are operating.
- When you finished using the appliance, always set the hot plates selection knob (3) to the OFF position
USING THE OVEN
-
Set temperature adjustment knob (1) to the desired value.
-
Set the heating mode selection knob (2) in position: – Both upper and lower + fan (2a)
– Upper + fan (2b) – Both upper and lower (2c) – upper + rotary spit (2d) – Both upper and lower, rotary spit and fan (2e) -
Set timer (4) to required baking time. A bell is rung upon reaching required baking time.
-
In order to switch the device off before the time has run out, rotate heating mode selection knob (2) knob to “OFF”(2f).
-
Always unplug the power cable from the power outlet after use.
USING ROTARY SPIT
- Put one pair of jaws on the axis sharp side, then slide onto the axis.
- Impale such prepared spit (9) into the center part of the product to be baked, stick the spit jaws (12) in the product.
- Put in second pair of jaws, and stick them from other side, “closing” the product on the spit axis.
- Check that the fixed product is located centrally along spit axis.
- Place the square end of the spit in the spit drive coupling on the right-hand side of oven heating chamber, and place sharp end in the bearing on left-hand side.
- Set temperature adjustment knob (1) to the desired value (for example 200°C)
- Turn the oven on using theating mode selection knob (2e), the lamp (5) will illuminate. Set the desired baking time.(4)
- After the baking time runs out, switch the oven off by rotating the heating mode selection knob (2) to “OFF”(2f). Always unplug the power cable from the power outlet after use.
- Before removing product baked on spit, wait a moment to allow the device to cool. Then grab the spit axis using spit removal handle (11). First raise left side, and slide to the left, so that right axle end leaves the drive coupling. Then, carefully remove baked meal from the oven.
GRILLING/BAKING
- Open oven door.
- Place grill (8) in the oven, place products to be grilled on the grill or dish with food, and close the oven door.
- Set the heating mode selection knob (2b)
- Set temperature adjustment knob (1)
- Set the desired baking time with the knob (4).
- After the baking, switch the oven off by rotating theating mode selection knob (2) to “OFF”(2f), and remove the power plug from the power socket.
- Wait a moment, and remove grill with baked products carefully using special heat-resistant gloves.
CLEANING AND MAINTENANCE
- Before cleaning of the oven switch it off and leave to cool.
- Disconnect the device from power source by removing power plug from the power socket.
- Do not immerse the oven in water.
- Clean the casing with moist cloth, and then wipe dry.
- Clean the tray and grill in water with washing-up liquid. Wipe dry using cloth.
- Clean the glass door with moist cloth or sponge soaked with water and washing-up liquid. Then wipe dry.
- Do not use sharp metal tools to clean the residues of baked products.
TECHNICAL DATA:
- Power supply: 220-240V ~50/60Hz Timer: 60 min.
- Power Nom.: 1500W 1000W+700W
- Power MAX.: 2500W 1200W+900W
- Capacity: 36 L
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>