ADLER AD 7333 Tower Fan User Manual
- June 6, 2024
- ADLER
Table of Contents
User manual
AD 7333
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240 V ~ 50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision. 6.After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let the cord hang over edge of a counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter. 15. Protect the motor part of the unit from immersion in water.
- Use only the original mounting hardware provided.
- Switch on the device only after complete installation. The partially assembled and commissioned device does not ensure safe use and proper operation. CAUTION: DO NOT TURN ON THE FAN WITHOUT FRONT AND REAR COVERS.
- Set up the fan away from curtains, curtains, or other objects that may be pulled in by the working fan.
- Do not insert any objects into the cover of the fan. Otherwise, it may lead to personal injury or damage to the device.
Montage
- First assemble the base by aligning the assembly poles with the corresponding holes, and inserting the poles into the holes X. Look at picture A1.
- Align the assembled base with the two holes (Y) with the tab on the fan body (V). See picture A2.
- Once connected, screw the base to the body using screws (Z) supplied. And put the power cord into the slot of the base.
- Stand the fan upright.
Product Description: Tower Fan Ad7333 – picture B
1. LCD panel
3. Front housing
5. Handle
7. Back housing| 2. Air outlet
4. Base
6. Air inlet
8. Remote control
---|---
LCD panel and remote control description – picture C
A. Power button
C. Oscillation button
E. LCD panel’s light-up button| B. Fan speed button
D. Timer button
---|---
Operation
Place the device on a flat and even surface. Plugin the device. The device will beep and display the current room temperature to indicate the device is working well. Firstly, press the button (A) to start the operation. Once activated, you can then select your desired function using the LCD Panel (1) or Remote Control (8) as described below:
- By pressing the button (A) turn on the device, the default setting is in middle fan speed. Press the button (A) it again, the device is in standby.
- Press the button (B) to select middle, high or low fan speed. The default setting is on middle speed when starting.
- Press the button (C) to oscillate/swing the airflow evenly the left and in the right direction. A proper control lamp will light on the LCD panel (1). Press the button (C) again to cancel air oscillation function.
- Press the (D) button to set the timer from 0 to 12 hours, each press is a 1-hour increment when the unit turns off automatically.
- Control panel light button (E): After continuous operation for 10 minutes, if no any operation by user, the display (1) stops to light up automatically. To light up the display (1) again, press any button.
Temperature display: After setting all desired functions, LED display (1) will
automatically display room temperature again.
Remote control (8) operation is the same as a manual operation of buttons on
an LED panel (1). To use the device with the remote control (8) supplied, pull
the installing film. In order to remove the battery, simply squeeze the small
tab and pull – look at picture D. Insert 1 x CR2025 (3V) lithium battery into
the small crevice.
IMPORTANT: The + symbol on the battery inserted should be facing upwards.
Firmly close the battery compartment to begin using the Remote Control (8).
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan’s motor part or any buttons to get wet.
- Before cleaning remove the plug from the electrical socket.
- To clean housing gently wipe it with a damp cloth, without detergents. Wipe dry.
- Store the fan in a dry place.
Technical Data:
Power: 60 W
Maximum Power: 120W
Voltage: 220-240V ~ 50Hz
Noice: ≤ 63dB (A)
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>