ADLER AD2834 Trimmer User Manual

AD 2834
User Manual

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The applicable voltage is 220-240V~ 50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over years of age and these activities are carried out under supervision.
6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand.
7. Never pull the power cable!!! Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
8. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
9. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
10. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
11. Never use the product close to combustibles.
12. Do not let the cord hang over the edge of a counter or touch hot surfaces.
13. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
14. In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
15. If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
16. Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put your and in the water. Has the device been checked by the qualified electrician before using it again?
17. . Do not handle the power adapter with wet hands.
18. Always switch the device off whenever you put it down.
19. Do not leave the device or the power adapter in the socket unattended when it is switched on.
20. If the device uses a power adapter, do not cover it as this could lead to a dangerous increase in temperature and damage to the device. Always insert the plug into the power socket on the device first, and then insert the power adapter into the power socket.
21. The cutters are very sharp. Exercise caution during assembly, disassembly, and cleaning. Do not touch the moving parts of the blades while the device is operating!
22. DO NOT CHARGE THE BATTERY FOR MORE THAN 48 HOURS – it may cause irreparable damage.
23. The charging process should be carried out at temperatures between 5 and 35 degrees Celsius.
24. Only change the combs when the trimmer is turned off.

PRODUCT DESCRIPTION:

1. Blade Head
2. Cutting Length leaver
3. Speed button / Power Button
4. Charging base
5. LCD Display 5a. Oil Indicator 5b. Speed Indicator 5c. Battery Remaining Capacity 5d. Charge Indicator 5e. Burden
6. Charging Socket
7. Combs 7a. Cleaning Brush 7b. Oil bottle

CHARGING THE BATTERY:

To begin charging plug the power cord into the charging socket (6) or charging base, and the charger into a 220-240V~ 50/60Hz mains power outlet.
Once plugged or put on a powered stand, the charging indicator icon (5d) will light up and the remaining battery (5c) will start blinking from bottom to top and back again showing the loaded.
After the battery is fully charged the remaining power indicator will stop blinking unplug the device from the charger.
The charging time is about 3 hours. After that the product is fully charged, the running time is about 240 minutes on 5.0k RPM and 180 minutes on 7.0k RPM.
Note: When it runs out of battery, you can use it while charging.

SPEED CONTROL BUTTON (4) Speed Indicator (5b)

Motor speed range: 5-speed levels are available 5000-7000 RPM
Every time you press the button (3), it will adjust 500 RPM (5b)

POWER BUTTON (4)

Press the power button (4) for 2 seconds to turn it off or once to turn it on.

OILING INDICATION (5a)

When the product works all time by 60 minutes, the oiling indicator (5a)will appear to remind you to clean and oil the blade (please look point with the cleaning method).

USING THE CLIPPER

Select the desired cutting length by turning the cutting length adjustment lever (2):0,6 / 0,8 / 1,0 mm
To change the comb turn the clipper off, unclip the comb (fig.1) and clip on the right one (fig.2). Start cutting by running the trimmer with the comb attachment against the direction of hair growth. This should be done slowly and at a steady speed. Please remember to regularly clean the trimmer and cutting head of any hair

CLEANING

Clean after each use.
Make sure the product is turned off and unplugged.
Push the edge of the cutting head with your thumb, until it opens (fig. 3)
Clean the cutting parts with the cleaning brush supplied (fig.4)
Clean the inside of the product with the cleaning brush supplied. (fig.5)
When the oiling indicator appears (5a) or every five uses, drop 2-3 drops of the machine oil into the space shown in fig.6
Reinstall the cutting head back to the clipper body. Make sure the bottom of the cutting head is aligned with the clipper body recess, then push the cutting head inward to the product (click) (fig.7)
Clean the casing with a dry cloth.

TECHNICAL INFORMATION

Power Nom.: 5W
Max Power: 60W
Adapter Power supply: 220-240V~ 50/60 Hz

Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.

WWW.ADLEREUROPE.EU

Documents / Resources

| ADLER AD2834 Trimmer [pdf] User Manual
AD2834, Trimmer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>