ADLER AD2831 Professional Hair clipper User Manual
- June 6, 2024
- ADLER
Table of Contents
AD 2831
User manual
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial
purposes.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V~ 50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let the cord hang over the edge of a counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
- If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
- Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put your hands in the water. Has the device been checked by the qualified electrician before using it again?
- Do not touch the device or power adaptor with wet hands.
- The device has to be turned off after every use.
- Do not leave switched-on equipment or adapter without supervision.
- Never use this device close to water, e.g.: Under the shower, in the bathtub, or above the sink filled with water.
- If the device utilizes a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
- The cutting scissors are very sharp. Use caution when assembling, dismantling, and cleaning. Do not touch any elements of the moving blade during the operation!
- DO NOT CHARGE THE BATTERY FOR LONGER THAN 48 HOURS – this can cause irreversible damage to the battery.
- The charging process should be conducted in temperatures between 5-35 degrees Celsius.
- Do not wash the blades in the water.
- Only change comb attachments when the device is switched off.
PRODUCT DESCRIPTION:
1. Blade Head
2. Cutting Length level
3. Power Switch
4. LCD Display
5. Battery Remaining Capacity| 6. Charge Indicator
7. Charging Socket
8a. Combs
8b. Oil bottle
8c, Charger / Charging cable
---|---
CHARGING THE BATTERY:
To begin charging plug the power cord into the charging socket (6) or charging
base, and the charger into a 220-240V~ 50/60Hz mains power outlet.
Once plugged or put on a powered stand, the charging indicator icon (6) will
light up and the remaining battery (5) will start blinking from bottom to top
and back again showing the loaded time remaining.
After the battery is fully charged the remaining power indicator will stop
blinking unplug the device from the charger.
The charging time is about 3 hours.
POWER BUTTON / SAFETY LOCK (4)
Flick the power switch (4) to turn it on or off
OILING INDICATION (5a)
When the oiling indicator turns on. Oil the device/
USING THE CLIPPER
Select the desired cutting length by turning the cutting length lever (2). To
change the comb turn the clipper off, unclip the comb, and clip on the right
one. The combs have magnets, please make sure the blade and the inside of the
comb are aligned correctly.
Start cutting by running the trimmer with the comb attachment against the
direction of hair growth. This should be done slowly and at a steady speed.
Please remember to regularly clean the trimmer and cutting head of any hair.
CLEANING
Clean after each use.
Make sure the product is turned off and unplugged.
Clean the cutting parts with the cleaning brush supplied.
Every 5 uses oil the head of the device.
Clean the casing with a dry cloth.
TECHNICAL INFORMATION
Power Nom.: 5W
Max Power: 100W
Adapter Power supply: 220-240V~ 50/60 Hz
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.