Banggood DL-100 Portable Digital Piano Instruction Manual

Banggood DL-100 Portable Digital Piano Instruction Manual

Function Introduction

Thank you for choosing this （XXX）digital piano. This digital piano is elegant and exquisite, which is the perfect combination of the traditional piano with the latest electronic technology in hand feeling and tone quality.
This manual contains valuable information that will help you make full use of your piano’s many capabilities. Please read it thoroughly and keep it handy for your future reference.

Notification: This product is an electronic product. It is normal that there is some electric current sound in the speakers (two speakers or one speaker, earphone) after being electrified. This product should be kept away from rf appliances and interference sources with motors, such as radio, router, TV receiver, refrigerator, washing machine, etc.

Adopt French dreamy sound source

Its core is using the latest French top audio, digital sampling, bring realistic auditory experience playing for you .
Headphone Jack

The external headphone jack is convenient to play without affecting others.

Assembly Illustration

Wooden Stand Assembly Illustration

X Type Stand Assembly Illustration

U Type Stand Assembly Illustration

1. Take out all the assembly part
   

2. Fasten two pieces of No 6 as a one using No 2 screw. So does No 7.
   

3. Place No 8 pipe labeled “Left” to the right side , the label is downward and the hole is upward. Place the other one in the same way. Placing two pipe in splay.
   

4. As shown in the illustration, insert the assembled No 6 and No 7 into the corresponding hole of placed No 8 and fasten them with No 3 screw, and then connecting assembled No 6 and No7 with No 4.
   

5. Attach No 5 tape to the No 6 pipe from underneath using No 2 screw in both side.

6. Attach 2 fixed screws to finish installation.
   No 1 screw is used to fasten the piano onto the stand.

U Type Stand Assembly Illustration

Operating Guide

1. Plug in power and turn it on
2. Volume Adjuster: Adjusting the volume of the product
3. Headphone Jack: Here you can connect headphone.
   
   

• Pedal Connector: Connecting the pedal cord sustains the sound.
• Headphone Jack: Both can be used in general. Plug in metal adapter to either jack, and insert headphone plug to metal adapter. ( Metal Adapter provided in the package)
• Power button: Power adapter plug in to DC-12v outlet.
• Audio Jack: This jack is used to connect the external audio. The output jack is used to connect the output of the piano to external amplifiers. (Note: Adapter self-provided.)
• USB MIDI   Port: Connecting with APP on mobile phone or ipad. The connecting cord should be specially used with MIDI and OTG. The mobile phone and iPad should support OTG function.
• MIDI Lesson Function: MIDI Cord(black) OTG Cord(white): This is one of the essential things for beginner to learning and practice, it’s also the connecting cord between digital piano and computer and iPad.
• Usage 1: Insert the rectangular connector of black MIDI cord to USB MIDI jack of the product and the other end connector connect the white OTG cord and then connecting with mobile phone downloading the practicing APP. (Connecting to computer only MIDI cord needed )
• Usage of Teaching and Practice APP
  Download the teaching and practice APP《Perfect Pianist on App store for free. If the app is unavailable on android system, please search the relevant website download it.

Maintenance

Power Cord Connection

1. Connect the included power cable to the AC IN inlet located on the back side of the instrument, and connect the instrument’s power cable to an AC outlet.( Figure 1)
2. Unplug the power cord and keep it properly when unused for long periods of time

Playing the piano

1. Press the POWER button , the product will turn on , the LED display will light up ,indicating that the piano is ready to be played.
2. Play music on the piano keyboard.
3. Turn off the power when the piano is not in use temporary The product processor chip is complex, similar to the computer system, sometimes it cannot respond, please turn off the power button and then turn it on again ,then it can work normally.

Note
This product is specially designed and manufactured for piano learners and players, so only the standard piano tone is available.

Volume Control
Turn the Volume knob to adjust the volume accordingly.

Using the Pedals
The product features three pedals: damper, ostentation and soft. Selecting the desired sound by stepping the appropriate pedal accordingly when using.

MIDI IN/ OUT
OUT: Sending note, program change and keyboard information to a MIDI- connected instrument or device.
IN: Receiving note, program change and keyboard information from a MIDI- connected instrument or device.

USB Port
The digital piano features a USB connector, allowing the product to be connected to a computer. It can transmit data from/to computer via pre- installed system or software. Through the preinstalled software ,you can operate practicing ,composition, saving function or playing built-in accompaniment music.

Appendix

W11:884

|

33aff

---|---

 A2-05

|

25Wx2

RA:AAM4

|

 AD 15V 3A

Safety Precaution

Proper warranty and maintenance is very important to prolong the service life of the product and reduce the fault.

Avoid heat ,damp or direct sunlight
Do not use the product in the area where the product is exposed to direct sunlight or near a air conditioner or extremely hot areas.

Do not place the product near electrical appliances such as TVs and radios.
The product may interfere with TV and radio reception. If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet.

Do not wipe the product with paint, thinner or other similar cosmetics.
When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.

No Shaking ,avoid collision
The products should be handled carefully when moving, no violent vibration and collision allowed, so as not to damage the external surface or internal electronic components.

Main Power
This product can be powered by ordinary indoor sockets. Please use only the power cord specified equipped with this product. Be sure to turn off the power when not in use temporary, unplug the power cord and keep it properly when out of use for a long time.

Symbol
Ensure the correct use of this product safely and prevent user and others from injury as well financial losses. Read all safety and installation instruction, explanation of symbols before using this product. The symbols and meaning are as follow:
WARNING
This symbol indicates that there is a potential risk of death or serious injury if this symbol is ignored and the product is mishandled.
CAUTION
This symbol indicates that there is a potential risk of injury or property losses if this symbol is ignored and the product is mishandled.
Example

• Denotes that operation should be pay attention to .The example instructs that risk of electric shock.

• Denotes a prohibited operation .The example instructs that disassembly of the product is prohibited.

• Denotes an operation that should be carried out. The example instructs the user to remove the power cord plug from the AC outlet.

WARNING
Smoke ,Unusual Odor ,Overheat
Continued use the product when smoking, emitting unusual odor or overheat may result in fire and electric shock hazards. When the above situation occurs, the following actions shall be performed immediately

1. Turn the power off immediately
2. Disconnect the power cord plug
3. Connect the shop from which the product was purchased.

• Improper power cord using may result in fire and electric shock hazards. Must observe the following precautions:

  • Only use attached power cord specified by the manufacturer

  • The product should be connected to an AC outlet of the specified voltage.

  • The power socket and power extension cord should not be overloaded.

• Improper power cord using may result in fire and electric shock hazards. Must observe the following precautions:

  • Do not place any heavy object on cord or heat it.

  • Do not attempt to modify cord or excessively bend it.

  • Do not twist or pull cord.

  • Replace the cord of the same specification if cord or plug is damaged.

  • The power socket and power extension cord should not be overloaded.

• Do not insert or disconnect the power cord plug with wet hands. Doing so may result in electric shock hazards.

CAUTION

• Improper power cord using may result in fire and electric shock hazards. Must observe the following precautions:

• Do not place the cord near a heater or other heat source.

• When disconnecting the AC power cord’s plug, always grasp the plug and pull it to remove it.

• Plug cord completely to outlet.

• Before connecting or disconnecting cords ,make sure that the power to this product and other devices is turned OFF.

• Unplug the power cord during lighting storms or when
  unused for long periods of time.

• Unplug the power plug and clean it to wipe all dust away from its prongs at least once a year.

• Do not put product in the fire otherwise it may cause wooden parts burn and electronic components explode. Doing so may result in fire and personal injuries hazards.

• Water and Any Foreign Objects Entry of water or other liquids and metal chips may result in fire and electric shock hazards. When the above situation occurs, the following actions shall be performed immediately.

  1. Turn the power off immediately.
  2. Disconnect the power cord plug if you are using the power cord for supply for electricity.
  3. Connect the shop from which the product was purchased.

• Disassemble and Modify Do not disassembly ,repair or modify the product in any way. Doing so may result in electric shock , burn or other personal injuries hazards. All internal inspection, adjustment and maintenance work shall be contact with the shop where the product purchased.

• Dropped or subject to strong impact Continued use the product when dropped or subject to strong impact may result in fire and electric shock hazards. When the above situation occurs, the following actions shall be performed immediately

  1. Turn the power off immediately.
  2. Disconnect the power cord plug if you are using the power cord for supply for electricity.
  3. Connect the shop from which the product was
     purchased.

• Plastic Wrap
  Do not allow anyone to put plastic wrap in the head or mouth. Doing so may result in suffocation. Adults must provide supervision in places where the children are present.

• Keep Distance from the Product and Stand
  Do not climb on top of the product or stand. Doing so may cause the product to become flip over, resulting in breakdown or personal injury hazards. Adults must provide supervision in places where the children are present.
  
  

• Placement
  Do not place the product in an uneven or unstable location. Doing so may cause the product to become dropped, resulting in personal injuries hazards.
  
  

• Moving
  Unplug the power cords connecting to AC outlet and all other cords coming from external devices before moving the product. Failure to do so may cause cords to become damaged, resulting in fire and electric shock hazards.

• Cleaning
  Make sure to turn the product off and unplug the power cord from the outlet before cleaning. Failure to do so may result in fire and electric shock hazards.
  
  

• Interface
  Only specified devices can be connected on the interface of this product. Failure to do so may result in fire and electric shock hazards.

• Site selection

  • Do not place the product in the following areas. Using the product in such areas may result in fire and electric shock hazards.

  • Extremely hot area or where a large amount of dust
    is present.
    

  • Kitchen or where ersonalized oil is present.

  • Areas where the product is exposed to direct sunlight or any other areas where can cause high temperature of the product.

• Volume
  When using the headphones, do not listen for long periods of time at high volume level. Doing so may result in hearing problem.
  
  

• Heavy Objects
  Do not put heavy objects on surface of the product. Doing so may cause overweight in the top of product, resulting in product tipped over or the heavy object fell. It may cause personal injuries hazards.
  
  

• Correct Assembly of Stand
  Improper assembly of the stand will cause it to tip-over, resulting in the product to fall and causing personal injury. Therefore, it must be assembled in accordance with the instructions in its attached  manual to ensure that the product is properly mounted on its stand.

• Fuse replacement
  If the fuse is blown, it may cause short circuit inside the  product, or voltage instability. Contact an electrician to identify and replace the fuse, failure to do so may result in fire and electric shock hazards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>