GATOR GRV90MKT 9-Inch Mirror Mounted Wired Rear View and Reversing Camera User Manual

GRV90MKT
USER MANUAL http://gatordriverassist.com

gatordriverassist.com

INCLUSIONS:
Mirror Monitor, Rear Camera, Camera Lead With Trigger Wire, USB Cable, 12/24V Car Charger & Mounting Hardware

Introduction

Thank you for purchasing the Gator GRV90MKT Mirror Monitor.
This product is a convenient and durable traveling video and data recorder. Please ensure that you have read the product manual and instructions in full, prior to installation and use. Failure to do so may result in product failure/damage or incorrect operation and therefore impact the product performance.

ATTENTION: The Mirror Monitor must be connected to power when in use. The internal battery only holds date and time settings.

Product features

• 9.35″ High-resolution LCD touch screen mirror monitor
• Rear camera input
• HD video recording 1920*1080 @ 25 FPS
• 110 Degree wide-angle lens surface mount butterfly camera
• Reverse camera functionality
• Live streaming functionality
• Parking guidelines
• G-Sensor, Loop recording
• 400mAh 3.7V Rechargeable battery
• Seamless cycle loop recording
• Rubber clip-on mount
• Supports Micro SD card class10 up to 64GB
• 12/24V DC car adapter (3.5M length)
• USB2.0 DC5V 2A
• Camera lead 6.5M length
• Dimensions 72(H) x 18(W) x 260mm(L)

Package components

Optional Accessories {Sold Separately)

GUNIHWC — Hard Wire Kit
Allows the Monitor to be powered via the vehicle fusebox.
Includes fuse taps for simple installation and also includes voltage cut-off detection to prevent battery drain.

GRV9OEXT — 3M Rear Cam Extension Cable
3M extension cable allows installation of the GRV90MKT on longer vehicles.
The cable connects at the camera end of the installation.

Product structure

1. LCD touch screen	4) Rear camera input

2. Power button| 5) Power input (Mini USB)
3. Micro SD card slot| 6) Mounting clip-on system

Installation of the Mirror Monitor

1. Clip-on mirror design securely mounts on the existing rearview mirror in the vehicle by stretching the bands at the back.
   There are two positions based on the thickness of the existing mirror.

2. Insert Micro SD card into the Mirror Monitor

3. Insert the power cable into the DC-in of the Mirror Monitor.
   Connect the DC charging end of the power cable into the 12-24V power socket of your vehicle. Hide cable as the picture below.

4. Connect the rear camera to the input on the mirror. Test the camera is working correctly and orientation before running the cable and securing the camera mount on your vehicle.

5. Attach the red trigger wire to the reverse light of your vehicle to engage parking guidelines when the vehicle is put into reverse gear.

6. Turn vehicles ignition on, and the Mirror Monitor and will automatically start recording.

7. When recording the recording indicator LED will flash red.

8. For the Mirror Monitor to work it must receive power from the charging adapter. Once power is removed or turned off the Mirror Monitor will save the current file and turn it off.

Touch screen functions

1. Recording indicator: Flashes red when recording.
2. Settings: Press to access the settings menu, see details on page 10 (turn off recording function to access).
3. Playback: Press to access recorded video files (turn off recording function to access).
4. Stop/Start Recording: Press to start or stop the recording function.
5. Image Rotation: Press to rotate image (if recording, recorded image will not rotate)
6. Microphone On/Off: Press to turn audio recording on or off.
7. Lock/ Unlock Recorded Files: Press to securely save a recorded file. The recording indicator will flash Yellow.
8. Date/Time: Displays the Date and Time.

Other Mirror Functions

Turn Device On/Off  Long press the power button to turn mirror ON/OFF.
Turn Off Display: Short press the power button while recording to turn off the display (recording will continue).
Display Brightness: Touch the screen and swipe left or right to change brightness. Brightness adjustment may be necessary for very bright or low light environments.
Display Viewing Area: In live view (streaming) or reversing mode, touch the screen and swipe up or down to change the viewing area (if recording, the recorded image will not change view).

Settings

Press the settings icon to enter video settings. Select function and select settings to make changes. Press the arrow icon to exit the function.

Video playback mode

When not recording press the playback icon to select recorded and locked recorded video footage. Press on the file to view on screen. You can press icons on the screen to lock/  unlock/ back/ forward/pause and delete recorded video files. Press the return arrow to exit to menu files. Press the return arrow to exit playback.

Connecting to a computer

You can remove the SD card from the Mirror Monitor and plug the card directly into your computer to access files. With the SD card inserted, and when connected to a  computer. Two folders will appear in the storage device. Normal and Event for locked files.

G-sensor sensitivity

This function activates in the case of a car accident by determining the gravitational acceleration (1 g = 9.8 meters/second2). When this function activates the Dash Cam will automatically save a 1-minute video file and save it to the Event folder on the SD card. We recommend Low Sensitivity to avoid false triggers.

Note: With this function turned on it may fill up the SD card with locked video files. Re-format the SD card to create space. The device does NOT guarantee video recording of all accidents as a built-in impact sensor may not be activated due to a combination of user settings and the level of impact during the collision.

Reversing guidelines

When triggered, the reversing guidelines only assist a driver with backing into a parking space or aligning with an object behind the vehicle. They do not measure distance. You should always get out of the vehicle and visually check the distance to aid the driver when using guidelines.

Formatting SD card

It is advisable to format the SD card when you first use the Mirror Monitor and also regularly if you have the setting G-sensor function on or create Locked files. This will fill up the card causing it to stop recording any footage. 64-128GB Micro SD cards need to be formatted in the Mirror Monitor to be recognized.

Infringement of copyright warning

Please note that this product is for personal use only, the method of use shall not violate the goods, or infringe on domestic or international copyright laws. Recorded images are for personal use only, please note that in some cases to use this product to record performances, exhibitions or business activities may infringe the copyright or other legal rights and interests of others.

Product specifications

Troubleshooting guide

If there are problems with the device, please refer to the following methods to resolve.
Cannot record video?
Please check whether there is enough space on the micro SD card or internal storage.

Stopping automatically while recording?
Due to the high amount of HD video data being recorded, please use a high- speed Micro SD card. To tell if you have the required high-speed card, check if it has the ‘Micro  SDHC’ logo on the SD card, and 16GB class 10 or above is recommended. Make sure that your card is labeled Micro SDHC and not Micro SDXC as SDXC cards will not work with this Mirror Monitor.

Fuzzy/dirty image?
Please check if the lens is filled with dirt or fingerprints and clean carefully. Please clean the lens with a cloth before shooting. Make sure to peel off the transparent protective sticker on the front of the Mirror Monitor’s lens.
The Mirror Monitor is jammed or not responding?
Please reset the device in system settings
Micro SD card not recognized by Mirror Monitor?
Format card in the Mirror Monitor’s menu settings before use.

Note: To alleviate card problems make sure the SD Card used is a quality brand from a reputable source.

Safety information & warnings

• Do not use the Mirror Monitor in damp working conditions; the Mirror Monitor is not waterproof.
• Do not try opening the shell or trying to repair the Mirror Monitor by yourself. If the accessories for the Mirror Monitor have any problems, please take them to an authorized repair agent for repair.
• Do not use a chemical substance, cleaning solvent, or cleaner to clean the Mirror Monitor, please use a moist soft cloth if you would like to clean the Mirror Monitor.
• Do not use the Mirror Monitor under conditions where dust is present.
• Please pay attention to cleaning the lens surface, use a moist soft cloth to clean the lens before use, to avoid poor video footage.
• Gator is NOT responsible for the loss of any recorded video during operation.
• Although designed to withstand the high impact of a car collision, Gator does NOT guarantee the record of accidents where the impact may cause the device to be damaged.

Technical assistance

If you need assistance setting-up or using your Gator product now or in the future, call Gator Support. Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am — 5pm AEST

Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Gator manuals/software, please visit the gatordriverassist.com website and click on ‘Firmware & Manuals”  or search for the product model number for more information, accessories, and products.

This manual is considered correct at the time of printing but is subject to change. For the latest manuals and updates refer to the website.
Copyright© 2021 by TDJ Australia
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, copying or other electronic or mechanical methods, without the prior written permission of the author.

www.gatordriverassist.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>