Soundking AK20 Series Instruction Manual
- June 6, 2024
- Soundking
Table of Contents
Soundking AK20 Series
Thank you for choosing this product.
To ensure that you are fully satisfied with this product, please read this
manual carefully before using our product. Keep this manual in a safe place.
The manual must be passed on to all subsequent users.
**
Observe
operating instructions!**
| The
signal word WARNING indicates dangers which can lead to serious injury if no
precautionary measures are taken.
---|---
| The
signal word NOTE indicates general precautions to be taken when handling the
product.
| Images
and screen displays in this manual may differ slightly from the appearance of
the actual product, as long as this does not have a negative effect on the
technical properties and safety of the product.
| All
personal formulations in these operating instructions are to be considered
gender-neutral.
These operating instructions apply to persons who have been supervised or
instructed in the operation of the device by a person responsible for their
safety and who have demonstrated that they are capable of handling the
device.
|
Children should be supervised to ensure that they do not play
with the appliance. Do not leave children unattended.
---|---
General safety instructions
-
To reduce the risk of fire or shock, do not expose this unit to rain or moisture.
-
Maintenance and repair must be carried out by qualified service personnel.
Never open the enclosure yourself. -
Before connecting to the power supply, make sure that the voltage corresponds to the operating voltage of the unit. The unit has ventilation slots to protect it from overheating. These must remain free so as not to obstruct the air circulation.
-
Avoid excessive heat, humidity, dust and vibration.
-
Only use the AC adapter supplied with the product.
-
Before switching on the unit, set the volume control to the minimum volume.
-
To replace the fuse, qualified service personnel must disconnect the power supply. Only the same fuse, which is already installed ex works, may be used.
-
Only use a soft, dry cloth to clean the unit.
Soundking AK20 GR
Volume Clean: This knob can be used to adjust the volume in the clean
channel
Gain Overdrive: Here you can control the intensity of the distortion
Volume Overdrive: Turn this control to adjust the volume in the overdrive
channel
Treble: Here you can adjust the tonal height in the mix
Middle: Here you can adjust the tonal midrange in the mix
Bass: Here you can adjust the tonal bass part in the mix
Reverb: Here you can adjust the intensity of the reverb
Specifications
| Performance | 20 Watt RMS, 60 Watt PEAK |
|---|---|
| Equalizer | treble, middle, bass |
| Output impedance | 4-Ohm 8″ Speaker |
| Connections | Instrument input, headphone output, connection for external |
speaker (8 ohms minimum)
Weight| 7kg
Dimensions| 346mm width x 343mm height x 192mm depth
Input power| 220V – 240V / 50 Hz
Fuse| T500mA H/250V
Soundking AK20 RA
Depth Overdrive: Turn these knobs to adjust the volume in the overdrive
channel and adjust the depth of the sound
Volume Clean: This knob can be used to adjust the volume in the clean
channel
Treble: Here you can adjust the tonal height in the mix
Middle: Here you can adjust the tonal midrange in the mix
Bass: Here you can adjust the tonal bass part in the mix
Presence: By adjusting this control, the treble is emphasised or
attenuated
Reverb: Here you can adjust the intensity of the reverb
Specifications
| Performance | 20 Watt RMS, 60 Watt PEAK |
|---|---|
| Equalizer | Treble, Middle, Bass, Presence |
| Output impedance | 8-Ohm 8″ Speaker |
| Connections | Instrument Input, Headphone Output, Effect Loop (Return & Send) |
| Weight | 7,2kg |
| Dimensions | 358mm width x 341mm height x 192mm depth |
| Input power | 220V – 240V / 50 Hz |
| Fuse | T500mA H/250V |
Soundking AK20 BA
Volume: This knob can be used to adjust the volume in the clean channel
Treble: Here you can adjust the tonal height in the mix
Middle: Here you can adjust the tonal midrange in the mix
Bass: Here you can adjust the tonal bass part in the mix
Presence: By adjusting this control, the treble is emphasised or
attenuated
Specifications
| Performance | 20 Watt RMS, 60 Watt PEAK |
|---|---|
| Equalizer | Treble, Middle, Bass, Presence |
| Output impedance | 8-Ohm 8″ Speaker |
| Connections | Instrument input, headphone output |
| Weight | 7,5kg |
| Dimensions | 368mm width x 372mm height x 210mm depth |
| Input power | 220V – 240V / 50Hz |
| Fuse | T500mA H/250V |
Soundking AK20 G
Volume Clean: This knob can be used to adjust the volume in the clean
channel
Gain Overdrive: Here you can control the intensity of the distortion
Volume Overdrive: Turn this control to adjust the volume in the overdrive
channel
Treble: Here you can adjust the tonal height in the mix
Middle: Here you can adjust the tonal midrange in the mix
Bass: Here you can adjust the tonal bass part in the mix
Specifications
| Performance | 20 Watt RMS, 60 Watt PEAK |
|---|---|
| Equalizer | treble, middle, bass |
| Output impedance | 4-Ohm 8″ Speaker |
| Connections | Instrument input, headphone output, connection for external |
speaker (8 ohms minimum)
Weight| 7kg
Dimensions| 346mm width x 343mm height x 192mm depth
Input power| 220V – 240V / 50Hz
Fuse| T500mA H/250V
WEEE-(Waste of Electrical and Electronic Equipment)
Your product has been designed and manufactured using high quality materials
and components that are recyclable and reusable. The symbol means that your
product must be disposed of separately from household waste at the end of its
life. Dispose of this unit at your local collection or recycling point.
Please help to protect the environment in which we all live.
All technical data and appearances can be changed without prior notice. All information was correct at the time of printing. Musikhaus Kirstein GmbH does not guarantee the correctness or completeness of the descriptions, photos or statements contained in this manual. Printed colours and specifications may differ slightly from the product. Products of Musikhaus Kirstein GmbH are only sold through authorised dealers. Distributors and dealers are not representatives of Musikhaus Kirstein GmbH and are not authorised to legally bind Musikhaus Kirstein GmbH in any way.
Musikhaus Kirstein GmbH
Bernbeurener Straße 11
86956 Schongau – Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>