Soundking PH06 Coaxial Speakers Owner’s Manual
- June 10, 2024
- Soundking
Table of Contents
Soundking PH06 Coaxial Speakers
Product Information
The COAXIAL SPEAKERS model PH06/PH06A are designed for indoor sound reinforcement occasions such as classrooms, meeting rooms, public broadcasting, multi-function halls, and banquet halls. These speakers have a frequency response of [insert frequency range], a coverage area of [insert coverage area], and feature a LF unit and HF unit. The sensitivity of the speakers is [insert sensitivity rating] and they have a nominal impedance of [insert nominal impedance]. The rated power of the speakers is [insert rated power] and they can produce a maximum SPL of [@1m]. The dimensions of the speakers are [insert dimensions (WxHxD)].
Product Usage Instructions
- Choose a location for the speakers that provides optimal coverage for your sound reinforcement needs.
- Connect the speakers to an appropriate amplifier or sound system using the provided inputs.
- Ensure that the power supply is compatible with the speakers and that it is connected properly.
- Adjust the volume and other settings on your amplifier or sound system to achieve the desired sound quality.
- Test the speakers to ensure that they are functioning properly and adjust as necessary.
- When not in use, turn off the power supply to conserve energy.
Product introduction
Ph06 and PH06A are multi-purpose passive active coaxial speakers with
completely independent innovative design and independent intellectual property
rights. Including PH06, Ph06A two speakers, the sound is clear, bright, thick
and full. It can be installed on the top of the leak, or can be installed on
the top of the semi-hidden. It can be perfectly used in various indoor sound
reinforcement occasions.
PH06, PH06A speakers are composed of five 1-inch neodymium dome tweeters and
one 6.5-inch neodymium mid-woofer unit, forming a combination with great
dynamic balance. The tweeter is arranged in a coaxial array above the mid-bass
which had accurate PAN.
The PH06A speaker uses a 2*50W high-efficiency Class D power amplifier with
high power and low distortion. Built-in powerful 24bit DSP speaker processing
module, with gain, frequency division, equalization, delay, limit, program
memory and other functions. There is a network interface on the speaker panel,
which is convenient for multiple links.
Application
Classrooms, meeting rooms, public broadcasting, multi-function halls, banquet halls, and other indoor sound reinforcement occasions.
Main functional parameters
- Model PHO6
- Type Passive 2-way Full Frequency Plastic Speaker
- Frequency response 75Hz~19kHz
- Coverage 90°* 60°
- LF unit 1×6.5＂
- HF unit 5×1＂
- Sensitivity(1W@1m) 86 dB
- Nominal impedance 8Ω
- Rated power 80W
- Max SPL(@1m ) 105dB
- Dimension(WxHxD) 391×409×330(mm)
- Model PH06A
- Type Active 2-way Full Frequency Plastic Speaker
- Frequency response 75Hz~19kHz
- Coverage 90°* 60°
- LF unit 1×6.5＂
- HF unit 5×1＂
- AMP power 2x50W
- Input sensitivity 0dBu
- Power supply 230V/115V
- Max SPL(@1m ) 105dB
- Dimension(WxHxD) 391×409×330(mm)