Soundking SD230 Digital Drum Set User Manual
- June 10, 2024
- Soundking
Table of Contents
- SD230 Digital Drum Set
- Product Information: SD200/202/203/210/230 Digital Drum Set
- Taking Care of Your Digital Drum Set
- Product Usage Instructions
- Handling and Transport
- Drum stand assembly
- Rear panel connection
- SET UP CANCEL
- Adjusting pad effect
- Change pad volume
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SD230 Digital Drum Set
Product Information: SD200/202/203/210/230 Digital Drum Set
Congratulations on your purchase of the SD200/202/203/210/230 digital drum set! This drum set has been developed to provide the feel and sound of a traditional drum set, but with greater ease of use. Before using the instrument, we recommend reading through the user manual to ensure proper care and usage.
Taking Care of Your Digital Drum Set
Location
- Avoid exposing the unit to direct sunlight, high temperatures, or other conditions that may cause deformation or damage.
- Disconnect all cables before moving the instrument.
Power Supply
- Use a suitable AC adaptor and ensure that the voltage matches the input voltage specified on the adaptor’s label.
- Turn the power switch off when the instrument is not in use.
- Unplug the AC adaptor during electric storms or if the instrument will not be used for an extended period of time.
- Avoid plugging the AC adaptor into the same outlet as high-power consumption appliances or using multi-plug adaptors, which may reduce sound quality or cause damage.
- Turn off power when making connections to avoid damage to the instrument or other devices.
Handling and Transport
- Avoid applying excessive force to controls, connectors, or other parts of the instrument.
- Always unplug cables by gripping the plug firmly, but not pulling on the cable.
- Disconnect all cables before moving the instrument.
- Avoid physical shocks caused by dropping, bumping, or placing heavy objects on the instrument.
Cleaning
- Clean the unit with a dry soft cloth.
- Use a slightly damp cloth to remove stubborn grime and dirt.
- Never use cleaners such as alcohol or thinner.
- Avoid placing vinyl objects on top of the unit, as vinyl can stick to and discolor the surface.
Electrical Interference
This instrument contains digital circuitry and may cause interference if placed too close to radio or television receivers. If this occurs, move the instrument further away from the affected equipment.
Product Usage Instructions
The SD200/202/203/210/230 digital drum set comes with a range of features and settings that allow for customization and optimal performance. The user manual includes instructions for the following:
- Eliminating crosstalk of pads
- Adjusting pad effect
- MIDI setting
- MIDI connection
- Connecting with external audio device
- Changing pad voice
- Connecting to PC for software update
- MIDI list
- Troubleshooting
- Audio source parameters
- Drum kit list
- Voice list
- DEMO song list
Refer to the user manual for detailed instructions on each of these features and settings. Enjoy your new digital drum set!
SD200/202/203/210/230
GD202211413 070404502
Congratulations!
Thank you for purchasing this digital drum set. The drum set has been
Developed to
act and play like a drum set but with greater ease. Before you use the
instrument, we
recommend you to read through this manual.
Taking care of Your Digital Drum Set
Location
– Do not expose the unit to the following Conditions to avoid deformation,
discoloration or more serious damage.
– Direct sunlight. – High temperature (near a heat)source,
Or in car during the day time). – Disconnect all cables before moving
Power Supply
-make sure to use the suitable AC adaptor, and also make sure the ac outlet voltage at your country matches the input voltage specified on the AC AC adaptor’s label.
-Turn the power switch OFF When the Instrument is not in use.
-An AC adaptor should be unplugged from the AC outlet if the instrument is not be used for an extended period of time.
– Unplug the AC adaptor during electric storms.
-Avoid plugging the AC adaptor into -The same AC outlet as appliance with
high power consumption, such as electric heaters or ovens. Also avoid using
multi-plug adaptors since these can result in reducing the sound quality,
operation errors, and possibly damage.
Turn Power OFF When Making Connections
– To avoid damage to the instrument and other devices to which it is
Connected, turn the power switches of all related device OFF prior to
connecting or disconnecting cables.
GD202211413
Handling and Transport
– Never apply excessive force to the controls, connectors or other parts of
the instrument.
– Always unplug cables by gripping the plug firmly, but not pulling on the
cable.
– Disconnect all cables before moving The instrument.
– Physical shocks caused by dropping, bumping, or placing heavy objects on the
instrument can result in scratches more serious damage.
Cleaning
– Clean the unit with a dry soft cloth. – A Slightly damp cloth may be used to
Remove stubborn grime and dirt. – Never use cleaners such as alcohol
or thinner. – Avoid placing vinyl object on top of
The unit (uinyl can stick to and discolor the surface).
Electrical Interference
– This instrument contains digital circuitry and may cause interference if
placed too close to radio or television receivers. If this occurs, move the
instrument further away from the affected equipment.
070404502
Drum stand assembly
1.Set up the drum stand. (Different model has different configuration)
2.Put the long cymbal tube/short cymbal tube/L shape pad rod into the drum
stand.
long cymbal tube
long cymbal tube
short cymbal tube
L shape pad rod
L shape pad rod short cymbal tube
3.Put the pads/cymbal/module to the relative position.
CRASH
RIDE
MODULE
TOM1 TOM2
HI-HAT
SNARE TOM3
CRASH 2 TOM 4
KICK HI-HAT CONTROL
GD2022114131
070404502
Connection
Note When connecting the pads and audio source box, turn off the power switch
please, otherwise it will destroy the drum kit!
Connecting the pads and module
1.SKD200/210/220/230 configuration: SKD200/210 configuration:TOM1-3(dual
CH),SNARE(dual CH),KICK(mono),HI-HAT (mono),RIDE(dual CH),CRASH(dual CH),HI-
HAT CTRL
SKD220/230 configuration:TOM1-4(dual CH),SNARE(dual CH),KICK(mono),HI-HAT (mono),RIDE(dual CH),CRASH1and CRASH2(dual CH),HI-HAT CTRL
Use the pad cable and connect one end with pad and the other with DSP of module, then tight it.
CRASH
RIDE
MODULE
TOM1 TOM2
HI-HAT
SNARE TOM3
CRASH 2 TOM 4
HI-HAT CONTROL
KICK
GD2022114132 070404502
Panel Description
Front panel
16
1
2
15
3
4
14
5
13
6
12
7
11
8
10
9
1. SAVE Start or stop playing DEMO SONG
2. MASTER VOLUME Adjust the volume of phone and line output.
3. START/STOP Start or stop playing DEMO SONG
4. TEMPO Enter into the tempo setting quickly.
5. RECORD Record the drum set sound.
6. VOICE PLAY Play/pause the recorded sound.
7. CLICK Play the metronome.
8. SONG Enter into DEMO SONG setting quickly.
10. CANCEL Cancel the operation or go back to the former menu.
11. KIT Switch to drum kit quickly.
12. DRUM OFF It mutes the DEMO SONG.
13. VOICE Quickly switch to voice setting.
14. SET UP Set up metronome/drum/DEMO SONG etc.
15. Direction key :Menu selection :change the parameter
(hold the button to change the value continuously.) 16. LCD
Displays the menu content.
9. Pad indication Indicates the working pad or tests the
pad, or set the pad parameter.
GD2022114133 070404502
Rear panel connection
17 18
19
20 21
23 22 24
17. PHONE Headphone output connector.
18. -OUT PUT- L/mono R L/R channel, connect with the output connector of
audio system or drum amplifier.
19. IN—MIDI—OUT Connect with the connector of external device which has MIDI.
20. USB Connect with PC connector (MIDI in/out
21. POWER SWITCH It turns on/off the drum.
22. DC IN Adaptor connector, 9V DC.
23. AUX IN External stereo input connector, e.g.
24. PAD connection Pad signal input connector, including: KICK,TOM1–3, SNARE,
RIDE,CRASH, HI-HAT CTRL
GD2022114134 070404502
Side button
25 26
25. TOM4 It connects with TOM4
26. CRASH2 It connects with CRASH2
LCD initial interfaces
1).CLICK=4/4(default value when on):metronome parameter indication
2).TEMPO=100(default value when on):tempo parameter indication 3).KIT01
POP01(default value when on): drum kit indication 4).SONG01(default value when
on): demo song indication 5).DRUM ON(default value when on): mutes the drum
sound of demo song.
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
GD2022114135 070404502
Connect with external devices
Connect to audio system or amplifier
When connecting with audio system or drum amplifier, use a cable to connect
with L/mono R of the audio system and the drum amplifier. Note: 1).Connect
with L/mono connector when connecting with mono audio device. 2).Connect with
L/mono and R connector when connecting with stereo audio device. 3).The volume
is controlled by the master volume knob of drum kit and of the audio device.
Connecting the headphones
The audio source box has 1/4″ headphone connector(if use a 1/8″ headphone ,use
an adaptor), the volume is controlled by the volume knob of the audio source
box.
Connect to MP3 or CD player
Connect the output of MP3 or CD player or other audio sources with AUX.IN
connector. The input signal can be mixed with the drum signal, strike the pads
according to the rhythm of the input signal.
Connect to a computer
1. Connect the computer via USB Receive and send MIDI signal.
GD2022114136 070404502
2.Connect the computer via MIDI port MIDI IN: receiver MIDI signal of computer
or other devices. MIDI OUT: send pad performance signal to external MIDI
devices or computer.
Connect with a MIDI keyboard
MIDI connector: If you’re using an external MIDI keyboard or pads to control
the digital drum, make
connections as shown. Here, it is used as a sound module.
Power supply and switch
Make sure the power is switched OFF. Connect the power adaptor to the DC IN
jack on the side panel. After confirming that all connections have been
completed, rotate the volume knob to the left (minimum volume level) before
switching the power on. Set the power switch to the “ON” position. The KIT
indicator on LCD will light up and the display will show kit number 01 pop 01.
Note:
Make sure the power is switched OFF when connecting the drum module with
external devices.
GD2022114137 070404502
ON / OFF
Basic operating
Selecting a drum kit
after powering up, the digital drum will be in kit menu (kit indicator on ).
the display should look like the following figure. there are 3 ways to
activate the drum kit menu:
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
1.Use the direction key to select drum kit.41 sets of drum kits in all. 20
sets of preset drum kits:KIT01—26 15 sets of user drum kits: USER01—15
2.Pressing the Pad Select buttons allows you to preview the current kit (fixed
tempo).
GD2022114138 070404502
CRASH
RIDE
TOM1
HI-HAT SNARE
HI-HAT CTRL
3.Hit the pads to play the current kit.
KICK
TOM2
TOM3
RIM
Playing the pads
Similar to an acoustic drum kit, the digital drum responds differently to
various playing techniques and dynamics. All the pads senses the striking
force. and some voices change tone depending on the striking force.
Drum pad and rim shot
The digital drum pad detects head and rim shots (rim shots Are different from
the pad shots).
Note: 1.SKD200/210/220/230:SNARE and TOM1-
TOM4 are dual channels. Both are rim shot.
2.RIDE: it delivers RIDE BELL sound when hit strongly, and RIDE CYMBAL sound
when hit Slightly.
3.SNARE delivers one sound when hit the pad and rim at the same time.
Cymbal bow shot and choke
CRASH and RIDE have the bow shot and choke, e.g. hit the cymbal or the rim
then hold the rim to CRASH or RIDE sound.
GD2022114139 070404502
PAD RIM PAD+RIM
RIM CYMBAL
HI-HAT The Hi-Hat sound varies depending on the position of the Hi-Hat pedal: Open Hi-Hat: Strike the Hi-Hat pad without pressing the pedal. Closed Hi-Hat: Strike the Hi-Hat pad with the pedal pressed completely down. Pedal Close: Press the pedal completely down without striking the pad. Half-open Hi- Hat:Strike the Hi-Hat pad with the pedal pressed halfway down
Performing
Adjusting the sensitivity of a pad
Adjust the sensitivity according to the desired style and dynamic range
1.Press [KIT] button to enter into the drum kit (KIT LED flashes once)
2.Press [SET UP]button to enter drum setting, use the direction key to Select:PAD SENSITIVITY,
GD20221141310 070404502
3.When PAD SENSITIVITY flashes, press [SET UP]
to enter pad sensitivity setting.
4.Strike the relative pad or press the pad button to
adjust sensitivity.
5.Use the direction key to select the parameter,
and use the keys
to change the parameter.
1).PAD CURVE adjust pad curve parameter
2).THRSHLD adjust pad threshold
3).CROSSTALK delete pad crosstalk
6.After changing the above parameters properly,
press [SAVE] to save the changing.
Note 1.refer to the pad setting to set pad parameter
in details.
2.press [CANCEL] to exit the setting
3.When adjusting the parameters, press [SET UP]
to reset.
(For details refer to :edit and save user drum kit)
DRUM PAD SETTING PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD ALL FAC
SET
PAD HIHAT PAD CURVE=2 THRSHLD=4 CROSSTALK=2
SET UP CANCEL
Using the metronome
1. User can use the [CLICK] button to turn on/off metronome.
2. use the direction key
to select the metronome items.
To reset.
(For details refer to :edit and save user drum kit)
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
Adjusting the click
3. When the metronome plays at the click and tempo, such as the LCD displays,
the CLICK flashes, user can use the direction key to change click.
(1/4,2/4,3/4,4/4,5/46/4,7/4,8/4,9/4,1/8,2/8,3/8,4/8,5/8,6/8,7/8,8/8,9/8,1/2,2/2,3/2,4/2,5/2,6/2,7/2,
8/2,9/2)
GD20221141311 070404502
4. In the tempo item, press [SET UP] button to set click tone parameters.
CLICK VOICE OPTION VOICE TYPE=01 VOICE VOL=100
1).VOICE TYPE=01 user can adjust the voice type (01—03) 2).VOICE VOL=127 user can adjust the voice volume (000—127) 3).When adjusting parameters, press [SET UP] button to reset.
User can adjust the click tempo. When playing DEMO SONG, press tempo and playing tempo (030—300)
1.Press [TEMPO] to adjust tempo speed.
2.Use the direction key
to change tempo speed.
3.When changing parameters, press [SET UP] button to reset.
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
Edit and save a drum kit
In the drum kit menu, user can change parameter according to the playing style
then save it. 1.Press [KIT] to select the drum kit 2.Use the direction key to
switch to the desired drum kit to edit.
3.Press [SET UP] to enter drum pad setting, and DRUM PAD SETTINGFlashes.
GD20221141312 070404502
1.Select pad via pad indication button or hit the pads.
2.Press [SET UP] again to enter tone parameter setting.
6. use direction key
to select tone.
(Note:refer to the tone list for tone)
Change the pad volume
7.Use direction key 8.Use direction key
to select VOLUME item. to change volume.
VOICE=ESN_04 VOLUME=080 PAN=084 MIDI PITCH=044
Change pad L/R channel position
9. Use direction key
to select PAN
10. Use direction key
to change L/R Channel position.
(GM standard:000—127)
SAVE CHANGE FOR USER01
PRESS SAVE FOR YES
PRESS CANCEL FOR NO
Change MIDI output pitch value
11. Use direction key to select MIDI PITICH 12. Use direction key to change
MIDI output pitch value(000—127)
(when adjusting parameter, press [SET UP] button to reset all parameters back
to default status)
Save setting to user drum kit
1.Press [SAVE] to save setting to user drum kit. 2.Use direction key to select
user drum kit(01—15)
3.Press [SAVE] button to save
Adjusting the pad sensitivity
1. Use the direction key to switch to PAD SENSITIVITY 2. Press [SET UP] to
enter pad sensitivity setting.
DRUM PAD SETTING
PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD ALL FAC SET
GD20221141313 070404502
Adjusting pad curve
Pad curve is relative to the pad dynamic signal. (Default:CURVE2)
CURVE1
CURVE2
PAD HIHAT PAD CURVE=2 THRSHLD=4 CROSSTALK=2
CURVE3
CURVE4
CURVE5
Adjusting the pad threshold
threshold: the minimum force to trigger a pad signal. Setting a high
threshold, the pad needs a strong force to generate a signal. This can avoid
accidental response, e.g. other device or pad generate unnecessary signal.
Setting a low threshold, the pad needs a weak force to generate a signal.
User can adjust threshold based on external condition and performing style.
Threshold range:1—8
Deleting crosstalk of the pads
When two pad are close, hitting one pad can cause the other pad generates a
signal. This crosstalk can be deleted by setting a high parameter of the other
pad.
Note If two close pads are hit at the same time and one pad threshold is too high, the high threshold pad does not generate a signal, so take care to set threshold to avoid crosstalk.
GD20221141314 070404502
Adjusting pad effect
1. Use the direction key to switch to EFFECT 2. Press [SET UP] to enter pad effect setting.
EQ setting
3. Use the direction key 4. Use the direction key
HI GAIN=085(default) LOW GAIN=095(default)
to select EQ type. to change EQ value. range:000-127 range:000-127
DRUM PAD SETTING PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD ALL FAC
SET
HI GAIN=085 LOW GAIN=095 REVERB TYPE=0 REVERB TIME=052 REVERB SIZE=4
Reverb setting
5. Use the direction key 6. Use the direction key
REVERB TYPE=0 REVERB TIME=052
to select Menu selection to switch Change the parameter
range:0-5 range:000-127
(When adjusting parameters, press [SET UP] to reset All parameters to the default status.)
HI GAIN=085 LOW GAIN=095 REVERB TYPE=0 REVERB TIME=052 REVERB SIZE=4
Drum option
1.Use the direction key to select Drum option 2.Press [SET UP] to enter Drum
option setting 3.Use the direction key to select TOM RIM or
SNARE RIM 4.Use the direction key to change option 5.ON: one sound when hit
the pad rim
OFF: no sound when hit the pad rim
DRUM PAD SETTING PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD KIT FAC SET
GD20221141315 070404502
6.In the HIHAT TYPE option Use the direction key to switch HIHAT type HIHAT
TYPE: pedal type selection, default: 1 (standard equipped: pedal type) HIHAT
TYPE: simulate hi-hat, default: 2
7.In the HIHAT SENS option, Use the direction key to adjust the velocity slope
of HIHAT
Reload default setting
1.Use the direction key to select RELOAD KIT SET or RELOAD ALL FAC SET
2.Press [SET UP] to go back to the default setting 3.In the RELOAD KIT SET
option use the direction key
to select saved drum kit e.g. FOR USER01 4.Press [SET UP] to the default
setting 5.Press [CANCEL] to cancel the default setting
Note: In the RELOAD ALL FAC SET option when press [SET UP] all parameters are
restore to factory and returned to the main screen.
TOM RIM = ON SNARE RIM = ON HIHAT TYPE = 1 HIHAT SENSE = 08
DRUM PAD SETTING PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD KIT FAC
SET
RELOAD SETTING FOR USER01 SET UP FOR YES CANCEL FOR NO
GD20221141316 070404502
Instruction for pad parameter setting
1. Pad curve
The curve is relative to the pad dynamic signal. (default:CURVE2)
CURVE 1:very low dynamic response, high volume. If used to trigger the
pads,the curve is flat. CURVE2: the standard setting, during playing or when
volume changes, it generates maximum natural signal. CURVE3: compared to
CURVE2, weak force generates relatively big change. CURVE4: compared to
CURVE2, strong force generates relatively big change. CURVE5: compared to
CURVE2, strong force generates very big change.
2. Threshold
Threshold: the minimum force to generate a pad signal. The high threshold
needs strong force to generate pad signal. Low threshold needs weak force to
generate pad signal. Setting threshold needs to refer to playing style and
external condition. Threshold range: 1—8
3. Crosstalk
If the crosstalk is too high, weak force is hard to trigger the pad. If the
crosstalk is too low, it is easy to lead to crosstalk.
4. About saving
All the changes to the preset drum kit can not be saved in the peset drum kit,
but in the user drum kit.
DEMO SONG playing
Select playing DEMO SONG
1. Press [SONG] to switch to DEMO SONG menu or use the direction Key to select SONG01
2. Use the direction key preset DEMO SONG
to Select the
3. Press [START/STOP]to play the selected songs
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
(refer to DEMO SONG LIST for the DEMO SONG
GD20221141317 070404502
Adjusting DEMO SONG accompaniment and drum volume
4. press [SET UP]to enter accompaniment and drum
volume setting.
ACC VOLUME:adjusting accompaniment volume.
Use the direction key to adjust
DEMO SONG accompaniment volume.
DRUM VOLUME:adjusting drum volume. Use the
direction key
to adjust DEMO SONG drum volume.
ACC VOLUME=090 DRUM VOLUME=090
Mute the Drums of DEMO SONG
1. when playing DEMO SONG and you want to mute the Drums of the DEMO song,
use the direction key to select DRUM ON, then DRUM ON flashes.
2. Use the direction key to switch to DRUM OFF
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
Adjusting DEMO SONG tempo
When playing, use the direction key to
adjust DEMO SONG tempo.
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
Record your performance
You can record pad performances and the drums of demo song.
Save recording
1.Press [RECORD] recording LED lights up 2.Strike pad to record or record the
drum section
of the song and recording LED Flashing 3.Press [RECORD] again to stop
recording. 4.Use the direction key to select the recording
number 5.Press [SAVE] to save the recording 6.Press [SAVE] to cancel saving
the recording
SAVE RECORDING RECORDING SLOT RC01 PRESS SAVE FOR YES PRESS CANCEL FOR NO
GD20221141318 070404502
Play back recording
1.Press [PLAY] playing LED lights up 2.Use the direction key to select the
recording number 3.Press [PLAY] again to play back the recording and the
playing LED flashing
PLAYBACK RECORDING RECORDING SLOT RC01
Recording quickly
1. Press [RECORD]. Recording LED lights up, and the Metronome turns on
automatically.
2. Strike pad to record or record the drum section of the song.
3. Press [RECORD] again to stop recording. Recording LED lights off. Your
performance or the drum section has been recorded.
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
(Note: when recording, you need to turn on DRUM ON, that is to switch DRUM OFF to DRUM ON)
Playing back the recorded performance
1. Press [VOICE PLAY].LED flashes once. It plays the recorded performance. 2.
Press [VOICE PLAY] again to stop playing. 3. If you are unsatisfied with the
recorded performance, press [RECORD] to record once again.
(Note: it can record the performance but can not save. This means the recorded
performance will cover the former recorded performance)
Creating your own drum kit
Relative information of drum kit
In the drum kit menu, user can select drum kit to play, or can edit the pad
tone and parameter, e.g. tone, volume, L/R channel pan, MIDI output pitch,
etc. This digital drum has 41 set drum kit for performance: 26 preset drum
kits:KIT01—26
15 user drum kit:USER01—15
GD20221141319 070404502
How to select a drum kit
If the drum kit menu does not appear, press [KIT] to enter drum kit menu.
[KIT]LED flashes once; Or use the direction key to select drum kit.LCD
displays the current drum kit number.
CLICK=4/4
TEMPO=100
KIT01 POP01
SONG01
DRUM ON
In drum kit menu, user can set the parameters, 1.Press [SET UP] to enter drum
kit parameter
setting interface. 2.Select DRUM PAD SETTING to enter drum kit
parameter setting. 3. Press [SET UP] again to enter pad parameter
setting interface. 4. Use the pad button to select pad or strike the
relative pad. Note: user can choose via hitting pad rim and the cymbal rim
5. User can select the pad parameter and change parameter via direction key
(refer to the following: change pad tone/change volume/change pan/change MIDI
out pitch
6. After setting, press SAVE to save the user drum kits. User can change the
drum kits via direction keys. After selection, press SAVE once again to save
the change or press CANCEL to cancel the change.
DRUM PAD SETTING PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD ALL FAC
SET
VOICE=ESN_04 VOLUME=080 PAN=084 MIDE PITCH=046
SAVE CHANGE FOR USER01 PRESS SAVE FOR YES PRESS CANCEL FOR NO
GD20221141320 070404502
Change pad voice
1. Select the pad via pad button or strike the pad directly.
2. Use the direction key to select voice.
(Note: refer to the voice list for voice)
Create your own drum kit
Change pad volume
1. Use the direction key 2. Use the direction key
to select VOLUME to change volume.
Change pad pan of L/R channel
1. Use the direction key to select PAN 2. Use the direction key to change the
pan
of L/R channel. (GM standard:000—127)
Change MIDI output pitch
1.Use the direction key
to select
MIDI PITICH
2.Use the direction key
to change
MIDI output pitch value(000—127)
(when adjusting parameters, press[SET UP]
To reset all parameters to default status)
VOICE=ESN_04 VOLUME=080 PAN=084 MIDI PITCH=046
VOICE=ESN_04 VOLUME=080 PAN=084 MIDI PITCH=046
VOICE=ESN_04 VOLUME=080 PAN=084 MIDI PITCH=046
VOICE=ESN_04 VOLUME=080 PAN=084 MIDI PITCH=046
GD20221141321 070404502
Making the setting for pads
1. Use the direction key to switch to PAD SENSITIVITY 2. Press [SET UP]
button to enter pad sensitivity setting interface.
DRUM PAD SETTING PAD TRIGGER EFFECT DRUM OPTION RELOAD KIT SET RELOAD ALL FAC
SET
Adjusting PAD CURVE
The pad curve is relative to the pad dynamic signals. (Default:CURVE2)
PAD HIHAT PAD CURVE=2 THRSHLD=4 CROSSTALK=2
CURVE1
CURVE2
CURVE3
CURVE4
CURVE5
GD20221141322 070404502
Adjusting pad threshold
Threshold: the minimum force to generate a pad signal. A high threshold needs
a strong force to generate a signal and this can avoid accidental response,
e.g. unnecessary signal from other device or pad. A low threshold needs weak
force to generate a pad signal. User needs to adjust threshold according to
the performance style and condition. Threshold range:1—8
Eliminating crosstalk of pads
When two pads are close, striking one pad can trigger one signal of the close
pad, so you can set the close pad to a high threshold to avoid crosstalk.
Note If the threshold is too high, and you strikes two pads at the same time,
the weak force does not trigger a signal of a pad with high threshold, so set
the threshold carefully.
Adjusting pad effect
1. Use the direction key
to switch to EFFECT
2. press [SET UP] to enter pad effect
setting interface
EQ setting 3. Use the direction key 4. Use the direction key
HI GAIN=085(default) LOW GAIN=095(default)
to select EQ type. to change EQ value.
range:000-127 range:000-127
DRUM PAD SETTING PAD TRIGGER EFFECT
DRUM OPTION RELOAD KIT SET RELOAD ALL FAC SET
GD20221141323 070404502
Reverb setting 5. Use the direction key 6. Use the direction key
REVERB TYPE=0 REVERB TIME=052 REVERB SIZE=4
to select Menu selection to switch ambience effect
range:0-5 range:000-127 range:0-4
(when adjusting parameters, press [SET UP] button to reset all parameters to the default status)
HI GAIN=085 LOW GAIN=095 REVERB TYPE=0 REVERB TIME=052 REVERB SIZE=4
HI GAIN=085 LOW GAIN=095 REVERB TYPE=0 REVERB TIME=052 REVERB SIZE=4
MIDI setting
This device is compatible with various MIDI devices. When it is used as
trigger device or audio source, it is compatible with GM standard, and can be
used with many sequencer software
MIDI connection
MIDI IN: inputs MIDI signal when connecting with external MIDI device MIDI
OUToutputs MIDI signal when connecting with external MIDI device USB: standard
USB2.0 interfaceconnect with USB of MIDI device or PC. The operation system
has relative driver without the need to install again. Compatible with the PC
system, e.g. Xp Win7,Vista,Mac OSX . After connection, the system recognizes
this device as USB AUDIO DEVICE (USB only used for MIDI connection
Note: when USB connects with PC, all MIDI data can transfer via USB
GD20221141324 070404502
Connecting with external audio device
This device automatically via channel 10 transfers drum signal to other MIDI
device, including notes, forces, pedal performance, etc. (Note: Song playback
data and metronome notes are not transferred) Record your performance with
external sequencer 1Connect with external sequencer or PC via MIDI OUT or USB
interface. 2Use the sequencer or the software to set channel 10 as a device to
start recording. 3Play the drum pads. 4Stop performance and recording.
Playback the recording. Setting MIDI note number to be transferred/received by
each pad 1Press VOICE button to enter the VOICE menu. 2Strike the relative
pad, use direction key to select MIDI PITCH 3Use the left/right key to MIDI
value for a pad. 4Press save button to save USER drum kit. Default factory
setting as below
Change pad voice
When MIDI OUT or USB cable is connected with MIDI device or sequencer, it
receives MIDI output signal and this device can play this signal. The voice
changes while drum kit changes. This device has most part of the GM drum kit.
User can create the own drum kits for performance. Refer to the MIDI list for
the support and limitation
GD20221141325 070404502
Connect to PC for software update
1.Make sure the module is switched off 2.Connect the USB socket to your PC
with a USB A to USB B cable (not included) 3.Switch the sound module on
4.Press and hold the SET UP button for 5 seconds, the module will enter
software updating mode 5.Press the SET UP button then your computer will now
identify the sound module as a device drive.
6.Download the software update . 7.Update files are identified as
“EDRUMVSD200.bin” (V = software version number) 8.Copy the bin file and
paste it to the device drive folder. (Do not rename or alter this file in
anyway) 9.The update will begin 10.Do not turn off the Sound module or power
supply during the update process 11.If the update is successful the module
will automatically return to its normal state and the device
will automatically unmount from the computer 12.You can now remove the USB
cable 13.If for any reason the module does not return to its normal state,
press the EXIT button to return
to the module home screen.
Update SD200 V1.3
UPDATING…
GD20221141326 070404502
MIDI list
99H BEND
GD20221141327 070404502
Position On/Off Sensing
GD20221141328 070404502
Trouble shooting
Audio source parameters
Polyphony 64 Drum kits: 26 preset drum kits:KIT01—26 15 user drum
kits:USER01—15 Voice 458 kinds of voices(DRUMS, PERCUSSION ,SFX) (6 kinds of
SNARE COMBO) Effects: ambience setting,3 kinds of EQ setting Sequencer DEMO
SONG:20 pcs Recording: real time recording, can not be saved Tempo:030—300
Display:LCD blue backlight, LOGO backlight color: red/green/blue adjustable
Connection 9 stereo in connectors, headphone stereo out connectors (1/8″),AUX
IN stereo connector (1/8″), 2 link connectors(1/8″ TOM4,CRASH2),audio output
connector(1/8″ L/mono R),USB,MIDI IN/MIDI OUT Power supply:DC 12V inside+
outsideDimension:232(L)162(W)121(H) Weight: about 0.5kg
GD20221141329 070404502
Drum kit list
KIT01 KIT02 KIT03 KIT04 KIT05 KIT06 KIT07 KIT08 KIT09 KIT10 KIT11 KIT12 KIT13
KIT14 KIT15 KIT16 KIT17 KIT18 KIT19 KIT20 KIT21 KIT22 KIT23 KIT24 KIT25 KIT26
POP1 POP2 POP3 POP4 POP5 POP6 ROCK1 ROCK2 ROCK3 METAL1 METAL2 METAL3 FUNK1 FUNK2 FUNK3 LATIN1 LATIN2 JAZZ01 JAZZ02 BRUSH ORCH DANCE1 DANCE2 EAST1 EAST2 PERC
USER01 USER02 USER03 USER04 USER05 USER06 USER07 USER08 USER09 USER10 USER011 USER12 USER13 USER14 USER15
POP1 POP2 POP3 POP4 POP5 POP6 ROCK1 ROCK2 ROCK3 METAL1 METAL2 METAL3 FUNK1 FUNK2 FUNK3
GD20221141330 070404502
Voice list
411 EKICKC1
418 SRIMC1 419 SRIMC2
420 SRIMC3 421 SRIMC4 422 SRIMC5
407 KICKC1 408 KICKC2 409 KICKC3
410 KICKC4
417 ESNAREC
412 SNAREC1 413 SNAREC2 414 SNAREC3 415 SNAREC4 416 SNAREC5
GD20221141331 070404502
Voice list
442 808T1 443 808T2 444 808T3
423 CHHC1 424 CHHC2 425 CHHC3 427 OHHC1 428 OHHC2 429 OHHC3 431 PHHC1 432 PHHC2
434 TOMC1 435 TOMC2 436 TOMC3 437 TOMC4 438 TOMC5 439 TOMC6 440 TOMC7 441 TOMC8
426 ECHHC1 430 EOHHC1 433 EPHHC1
GD20221141332
445 ECRASHC1 446 ECRASHC2 447 ECRASHC3 448 ECRASHC4 449 ECRASHC5 450 ECRASHC6
451 ECRASHC7 452 ECRASHC8 453 ECRASHC9 454 SPLASHC
070404502
Voice list
455 RIDELC1 456 RIDELC2 457 RIDEHC1 458 RIDEHC2
GD20221141333 070404502
Voice list
GD20221141334 070404502
Demo Song list
GD20221141335 070404502
www.soundking.com
GD202211413 070404502
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>