OLIGHT M1T RAIDER PLUS User Manual
- June 6, 2024
- OLIGHT
Table of Contents
OLIGHT M1T RAIDER PLUS User Manual
M1T RAIDER PLUS
Thank you for purchasing this Olight Product. Before use, please read the manual carefully!
INSIDE THE BOX
M1T RAIDER PLUS(with battery), Lanyard, User Manual
SPECIFICATIONS
*All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the flashlight.
BATTERY INSTALLATION
If the battery needs to be changed, make sure that the positive polarity side of the battery faces toward the direction of the flashlight head (the side of the LED).
AVAILABLE BATTERIES
- 2 x CR123A Lithium BATTERY
-
When the flashlight is turned on, it will default on high mode. Soft press without fully clicking the switch for momentary on. Fully
press and click for constant on. -
Quickly double half press the switch to activate low mode and quickly triple half press for strobe mode.
DANGER
- Do NOT throw the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
- Do NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to flammable objects.
- Do NOT use rechargeable lithium battery without protection circuit which could lead to the damage of the battery or unexpected danger.
- Do NOT mix new and old batteries, mix non-rechargeable and rechargeable batteries, or use batteries which are incompatible with this product.
WARNING
- Keep out of reach of children.
- When the flashlight is working on the high mode, the surface temperature can reach 50°C. Please switch off the flashlight temporarily or turn it to low mode.
- If the light is about to be put aside for a long time or be transported, please unscrew the tail cap for half a circle to cut off the circuit.
NOTICE
- Ensure battery is inserted with the positive (+) end pointing to the head of the flashlight (LED side).
- When the flashlight is turned on, it will default on high mode. Turn it on again within 2 seconds after turning it off, to enter low mode. Turn it on again after turning it off for over 2 seconds to return to high mode.
- When high mode (800 lumens) has been on for 5 minutes (but not more than 5 minutes) after turning it on, the output will gradually lower around 50% within the following first minute.
- When the battery voltage is too low and cannot support high mode(800 lumens), it will automatically enter low mode. This allows the flashlight to still turn on even when the batteries are very low.
- It is normal for the flashlight to blink when the battery is running out.
WARRANTY
Within 30 days of purchase : Return to the original seller for repair or
replacement.
Within 5 years of purchase : Return to Olight for repair or replacement.
Battery Warranty : Olight offers a one year warranty for all rechargeable
batteries.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.
USA Customer Support
Global Customer Support
Customer-service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.
EU-DECLARATION OF CONFORMITY
EU-Declaration of Conformity can be found here CE:
https://olightworld.com/ec-declaration
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park,No 6 Zhongnan Road,
Changan Town, Dongguan City, Guangdong, China.
Made in China
V2. 07, 07, 2020
3.0025.6010.9001
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>