OLIGHT Olantren High Med Low Flaming LED Green User Manual

: June 6, 2024
: OLIGHT

Table of Contents

Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OLIGHT Olantren High Med Low Flaming LED Green User Manual

OLIGHT Olantren High Med Low Flaming LED Green User
Manual

Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!

IN THE BOX

OLIGHT Olantren High Med Low Flaming LED Green -
overview

FEATURES:

Featuring two interchangeable LED modules, the Olantern allows you to switch between standard white light or an ambient flickering flame.
The high-performance LED combined with transparent cover ensures an even, steady 360° light distribution.
Powered by four 3.7V 1900mAh lithium-ion batteries, it is rechargeable via MCC3 and runs up to 80 hours.
The reliable hanging hook and stable base make carrying, storing and decorating super handy.
The battery indicator around the button is motion-sensitive, fading on and off to help locate your lantern in the darkness.

SPECIFICATIONS

OLIGHT Olantren High Med Low Flaming LED Green -
SPECIFICATIONS

All above specifications are test results based on ANSI/NEMA FL1-2009 Standard.

USB MAGNETIC CHARGING CABLE — MCC3

OLIGHT Olantren High Med Low Flaming LED Green - USB MAGNETIC CHARGING CABLE
-- MCC3

PRODUCT OVERVIEW

OLIGHT Olantren High Med Low Flaming LED Green - PRODUCT
OVERVIEW

BATTERY LEVEL INDICATOR

OLIGHT Olantren High Med Low Flaming LED Green - BATTERY LEVEL
INDICATOR

CHARGING

OLIGHT Olantren High Med Low Flaming LED Green -
CHARGING

Before first use please fully charge the product.
Connect the magnetic USB end of the charging cable (MCC3) to an external USB power source, then attach the other end of the magnetic charging cable to the charging port (best charging efficiency with more than 8W USB power source). The red indicator means charging, green indicator means charging completed (battery power＞95%).
Only charge with standard MCC3, not compatible with other MCC.

LED MODULE REPLACEMENT:

Turn off the Olantern. Unscrew the cover as guided by the “OPEN” mark on the upper cap and remove it. Turn around the LED module anticlockwise and remove it from the base. Fetch another module and screw it onto the base. Reinstall the cover. If the LED module is not put in place, the indicator around the button will have no response and the product won’ t work when you turn on the Olantern.

OLIGHT Olantren High Med Low Flaming LED Green - LED MODULE
REPLACEMENT

NOTICE

The Olantern battery indicator is motion-sensitive. The indicator will fade on and off in green, yellow, or red to indicate a high, medium, or low battery level when you move the Olantern. After seven seconds with no motion, the indicator will turn off.

DANGER

DO NOT throw the light directly into human eyes, which may cause temporary blindness or permanent damage to the eyes. DANGER
DO NOT cover the Olantern that is on. The generated heat can cause burning or even unpredictable disasters.
Keep it out of reach of children.

WARNING

DO NOT immerse the Olantern in water

HOW TO OPERATE

ON/OFF : Single click the button to turn the Olantern ON/OFF. The Olantern would return to the previously memorized setting when it is on.

CHANGE BRIGHTNESS LEVEL: When the Olantern is on with the White Light LED Module, press and hold the button and the Olantern would start from the present brightness level, automatically cycle through low, medium, and high setting. As for the Flaming LED Module, the brightness is fixed and cannot be changed.

LOCKOUT/UNLOCK : When the Olantern is off, press and hold the button, it will enter the Lockout mode after staying in the low setting for a while. Under the lockout mode, when single click the button, the red indicator around the button will be on to signal that the Olantern is in lockout mode. To unlock it, keep holding the button until the Low mode is on again.

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase: Contact Olight for repair or replacement.
USB magnetic charging cable: One year.

This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.

USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

EU-DECLARATION OF CONFORMITY