VICTORY VP200ESK Cordless Electrostatic Handheld Sprayer Instruction Manual

June 6, 2024
VICTORY

Important Safety Instructions

Victory Innovations • 7122 Shady Oak Road, Eden Prairie, MN 55344 • victorycomplete.com

Items Included:

1 Professional Electrostatic Sprayer
1 Tank
1 16.8 Volt Battery (3400 mAh)
1 16.8 Volt Charger
1 Nozzle Wrench
1 Tank Cap

Product Components:

A. Tank
B. Tank Release
C. Tank Locking Collar
D. 16.8 Volt Battery
E. Unit ON/OFF
F. Lock OFF Switch
G. Electrostatic Charge ON/OFF
H. 3-in-1 Nozzle
I. Headlight
J. Grounding Strap

Optional Accessories Sold Separately:

VP20B Professional 16.8 Volt Battery
VP10 Professional 16.8 Volt Charger
VP30 VP200 Replacement Tank
VP49 Nozzle Wrench
VP50 3-in-1 Nozzle
VP55 Single 40 Nozzle
VP57 Single 80 Nozzle
VP59 Single 110 Nozzle

WARNING: It is the operator’s responsibility to read and understand the cautions and warnings in this manual before attempting to operate this machine.
IMPORTANT: The Electrostatic Sprayer has been designed and engineered to be very safe during normal operation. As with all cordless products certain safety precautions should be taken.
Please read the following WARNINGS before operating the machine.
Understand these safety precautions before operating the machine. Failure to properly follow these precautions may lead to a fire, explosion, or electrical shock hazard.

Important Safety Instructions

WARNING: When using electric appliances, basic precautions should always be followed, including the following:

  • Read all the instructions before using the appliance.
  • To reduce the risk of injury, close supervision is necessary when any appliance is used near children.
  • Do not contact moving parts.
  • Only use attachments recommended or sold by the manufacturer.
  • To reduce the risk of electrical shock, do not put electrodes in water or other liquid. Do not place or store appliances where they can fall or be pulled into a tub or sink.
  • Use only the charger supplied by the manufacturer to recharge.

WARNING
READ AND UNDERSTAND THE OWNER MANUAL AND ALL OTHER SAFETY  INSTRUCTIONS BEFORE OPERATING THIS MACHINE

CAUTION
TO AVOID ELECTRICAL SHOCK DO NOT TOUCH OR INSERT ANYTHING INTO THE NOZZLE OF THE SPRAYER

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
WARNING: This machine contains an electrostatic device that may interfere with sensitive medical devices such as pacemakers, defibrillators, or similar devices. DO NOT operate this machine or stand within 10 feet if you use such medical devices. Contact your physician prior to operation if you are unsure if this machine will interfere with your
medical device.
WARNING: Always have the machine serviced by a professional, qualified representative. Never attempt to personally service the machine or access its internal components.

General Safety Rules for All Battery-Operated Sprayers

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

Save These Instructions

  • Keep your work area clean and well-lit.
  • Do not operate a cordless sprayer in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Cordless Sprayers create sparks, which may ignite dust or fumes.
  • Keep bystanders, children, and visitors away while operating a cordless sprayer. Distractions can cause you to lose control.

Electrical Safety

  • CAUTION: To avoid electrical shock do not touch or insert any foreign objects into the nozzle.

  • A cordless sprayer with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

  • Use battery operated sprayer only with the specifically designated battery pack. The use of any other batteries may create a risk of fire.
    Personal Safety

  • Stay alert, watch what you are doing, and use common sense when operating a cordless sprayer. Do not use a cordless sprayer while tired or under the influence of drugs,  alcohol, or medication.

  • A moment of inattention while operating a cordless sprayer may result in serious personal injury.

  • Avoid accidental starting. Be sure the switch is in the locked or OFF position before inserting the battery pack.

  • Carrying a sprayer with your finger on the switch or inserting the battery pack into a tool with the switch ON invites accidents.

  • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

  • Use safety equipment. Always comply with any requirements for protective clothing, goggles, gloves, facial masks, or respirator required by the formulation label.

Formulations

  • Most water-based chemicals are suited for machines. Questions? Call 952-843-5100
    Do Not Use This Cordless Sprayer To Apply Flammable Liquids.

  • Do not use oil-based liquids.

  • Store formulation in its original labeled container.

  • Ensure that formulation is applied only in strict compliance with the formulation label as well as local, state, and federal regulations.

  • Do not use oil-based or flammable formulations with this machine.
    Tool Use And Care

  • Do not use a machine that is broken or damaged in any way.

  • Do not alter the machine by adding or removing parts.

  • Do not restrict the motor air inlet area.

  • Do not tamper with the output nozzle.

  • Do not allow the machine to operate unattended.

  • Do not use outdoors when it’s raining.

  • Do not use a cordless sprayer if the switch does not turn on or off. A cordless sprayer that cannot be controlled with the switch is dangerous and must be repaired.

  • Disconnect the battery pack from a cordless sprayer or place the switch in the locked or OFF position before making any adjustments, refilling the tank, or storing the cordless sprayer. Such preventative safety measures reduce the risk of starting the cordless sprayer accidentally.

  • Store idle cordless sprayer out of reach of children and other untrained persons. Cordless sprayers are dangerous in the hands of untrained users.

  • When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or fire.

  • To clean the sprayer use soap, water, and a damp cloth to wipe clean. To clean internal components run water through the sprayer for 3 minutes.

Important Safety Instructions for Battery Packs

Your cordless sprayer uses a Victory Innovations, 16.8-volt Lithium-Ion battery pack. The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow the charging procedures outlined.
CAUTION: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, store in extreme heat or cold. Keep away from children. Do not disassemble. Do not dispose of it in the fire.
Do not attempt to disassemble the battery or remove any component projecting from the battery terminals. The battery and charger have no user-serviceable parts. Fire or injury may result from tampering prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting.
DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason. If the battery pack case is cracked or damaged, do not insert it into the charger. Electric shock or electrocution may result.
WARNING: Fire hazard. Do not store or carry batteries so that metal objects can contact exposed battery terminals. For example, do not place batteries in aprons, pockets,  tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
CAUTION: The battery pack must be securely attached to the cordless sprayer. If a battery pack is detached, personal injury may result.
Do not incinerate the battery pack even if it is severely damaged or is completely worn out.
The battery pack can explode in a fire.
Charge the battery packs only with a Victory Innovations charger.
DO NOT splash or immerse in water or other liquids.
Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40°C), such as outside sheds or metal buildings in summer.
Damaged battery packs should be recycled.
Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools, and the like.
The US Department of Transportation Hazardous Material Regulations (HMR) prohibits transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage)
UNLESS they are properly protected from short circuits. When transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.

Important Safety Instructions for Battery Chargers

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers. Before using the charger, read all instructions and cautionary markings on the charger, battery pack, and product using the battery pack.
DANGER: Electrocution hazard. 120 volts are present at charging terminals. Do not probe with conductive objects.
WARNING: Shock hazard. Do not allow any liquid to get inside the charger.
CAUTION: Burn hazard. To reduce the risk of injury, charge only Victory Innovations rechargeable batteries. Other types of batteries may burst to cause personal injury and damage.

  • CAUTION: Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material.  Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities.  Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug the charger before attempting to clean.
    DO NOT attempt to charge the battery pack with any chargers other than the one noted in this manual. The charger and battery pack are specifically designed to work together.
    These chargers are not intended for any uses other than charging Victory Innovations rechargeable batteries. Any other uses may result in a risk of fire, electric shock, or electrocution. Do not expose the charger to rain or snow.
    Pull by plug rather than cord when disconnecting charger. This will reduce the risk of damage to the electric plug and cord. Make sure that the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
    Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in a risk of fire, electric shock, or electrocution.
    An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety.
    The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.
    Recommended Minimum Wire Size for Extension Cords:
    Total Length of Cord
    25 ft., 50 ft., 75 ft., 100 ft., 125 ft., 150 ft., 175 ft.,
    7.6 m, 15.2 m, 22.9 m, 30.5 m, 38.1 m, 45.7 m, 53.3 m,
    Wire Size AWG
    18, 18, 16, 16, 14, 14, 12
    Do not place any object on top of the charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
    Do not operate chargers with damaged cords or plugs — have them replaced immediately.
    Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged in any way.
    Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
    NEVER attempt to connect two (2) chargers together.
    The charger is designed to operate on standard household electrical power (120 or 240 Volts) with a proper country plug.

Operation Instructions

  1. To start the use of the Victory Cordless Electrostatic Sprayer first charge your battery by inserting the Victory 16.8-volt battery into the charger and plugging the charger into a wall socket.
  2. Next, fill tank A by first removing it from the unit by rotating the tank locking collar C and pulling the tank release ring B. The tank can now be removed. Note: you must hold on to the tank when you pull the tank release ring or the tank will fall to the floor.
  3. Fill the tank with the desired liquid.
  4. Insert the tank into the sprayer and rotate the tank locking collar C until you hear the click of the tank release ring B snap into place.
  5. Insert the charged battery into the battery socket and lock it in place.
  6. Pull the trigger and spray on your desired surface.
    To ensure maximized electrostatic performance always keep your hand firmly wrapped around the handle in contact with the grounding strap

Nozzle Instructions

To Adjust the Nozzle:

  • Remove the battery from the unit.

  • Insert the nozzle wrench into the front end of the unit.

  • Rotate the wrench until the tabs on the nozzle and the slots on the wrench are lined up.

  • When the wrench slots and the nozzle tabs are lined up, the wrench will be completely inserted into the front end, rotate the wrench clockwise to adjust to a different size spray. The largest particle tip has a line cut through it, rotate clockwise until you hear a click to get the medium particle, and rotate clockwise again until it clicks again to get the smallest particle.

  • Remove the wrench when complete.
    To Remove the Nozzle

  • Remove the battery from the unit.

  • Insert the nozzle wrench into the front of the unit.

  • Rotate the wrench until the tabs on the nozzle line up with the slots in the wrench.

  • When the tabs and slots are lined up the wrench will be completely inserted into the front end.

  • To remove, rotate the wrench in the counterclockwise direction until the nozzle comes loose (¼ rotation).

  • Remove the wrench when complete.
    To Insert Nozzle

  • Remove the battery from the unit.

  • Insert the nozzle into the wrench, lining up the tabs on the nozzle and the slots on the wrench.

  • Insert the wrench with a nozzle into the front end of the unit.

  • Push in and rotate the wrench ¼ turn counterclockwise. When you hear a click the nozzle is in position.

  • Remove the wrench when complete.

Cleaning Electrostatic Sprayers

All users follow safe cleaning practices to protect themselves from harmful exposure when cleaning the sprayer.
It is recommended that users should purchase a second tank to wash out cordless electrostatic sprayers to prevent residual solution build-up. Disconnect the storage tank from the sprayer and use the black threaded cap that is included. Disconnect storage tank from sprayer uses the locking threaded cap to secure tank and solution when not in use.
Review chemical MSDS sheet on how best to secure and store your chemical solution when not in use.
Cleaning Nozzle
If your nozzles become plugged soak in hot soapy water and blow out with pressurized air to remove the blockage.
Example below: Nozzle #1 (Dirty) & Nozzle #2 (Clean). Nozzle #1 has not been properly cleaned after being used. When not properly cleaned, residual chemical deposits build up on the sprayer nozzle. Deposit build-up results in decreased bar pressure and decreased spray patterns. The recommendation is that a full tank of water is sprayed through the unit after every few days of use to rinse any residual chemical build-up to reduce the chance of blockage.

Nozzle #1 (Dirty)

|

Nozzle #2 (Clean)

---|---

How to Use

Charge Battery
The lights on the right are fully illuminated when the battery is empty. The lights on the left are fully illuminated when the battery is charged. Charge time is two (2) hours.

Remove Tank
1. Rotate collar to the unlocked position.
2. Pull locking ring to remove.
3. Lift sprayer unit off of the tank.

Connect Tank
1. Align tank grooves into slide rail & lower sprayer unit onto the tank.
2. Listen for a click.
3. Rotate collar to the locked position.

Adjust Nozzle
Rotate the nozzle clockwise to change the size of the particles.
The largest nozzle setting has an opening resembling a line.

Spray
The optimum sprayer distance is 24 inches (61 cm).

Clean Up
After use, spray a tank full of water through the sprayer to rinse the components of any chemical build-up.

One Year Limited Warranty

Victory Innovations will repair or replace, without charge, any defects due to faulty materials or workmanship for one year from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, email us at customerservice@victorycomplete.com. This warranty does not apply to damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights, which vary in certain states or provinces.
FREE WARNING LABEL REPLACEMENT : If your warning labels become illegible or are missing, email us at customerservice@victorycomplete.com for a free replacement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VICTORY User Manuals

Related Manuals