VICTORY VP300ES Cordless Electrostatic Backpack Sprayer User Guide
- June 6, 2024
- VICTORY
Table of Contents
VP300ES
Professional
Cordless Electrostatic
Backpack Sprayer
Backpack Quick Start Guide
See full manual for more detail
Charge Battery
A fully charged battery will spray up to 4 hours before needing to be recharged
Remove & Fill Tank
- Unlatch tank release by lifting upward
- Remove tank by lifting upward and outward from the backpack base
- Fill the tank with a water-based chemical that is approved to be sprayed
- Follow any recommended PPE requirements for handling and using chemicals per the Safety Data Sheet
Connect Tank
- Any excess moisture on the tank should be wiped away before replacing the tank into housing
- Lower the tank onto the backpack base unit
- Secure tank by pressing down on the latch at top of unit
Nozzle Settings
Turn one-quarter turn counterclockwise to insert nozzle Turn clockwise until
you hear a click to change the setting
Select particle size for your chemical’s dwell time* & application:
110 microns | 15 min |
---|---|
80 microns | 10 min |
40 microns | 5 min |
*Average dwell times may vary based on humidity, temperature, spray speed, and distance.
SPRAYER USE
The optimum sprayer distance is 4–6 feet (1.22–1.83 m) from the surface being
sprayed Spray in an “S” like fashion from top to bottom of surface areas.
Start at the opposite end of the room & progress toward the door to avoid
walking through spray patterns & touching sprayed surfaces.
Utilize extension wand for better control and reduce the amount of back-spray
on the handle and user
Maintain proper grip of the handle to ensure contact to grounding strip on
trigger
Hands should remain dry during operation
To reduce any static build up in the user, the user’s free hand should be used to touch grounded surfaces that have not been sprayed (e.g. metal components of adjacent equipment)
Clean & Store Daily
- All users should follow safe cleaning practices to protect themselves from harmful exposure when cleaning the sprayer.
- Review chemical Safety Data Sheet for how to secure and store your chemical solution when not in use.
- Remove all chemicals from the tank and flush with water.
- Spray water through each nozzle size for at least 30 seconds.
Cleaning Nozzle
If the nozzle becomes plugged, soak in hot soapy water and blow pressurized
air through to remove the blockage.
Electrostatic Discharge (ESD)
In environments less conducive to natural electrostatic charge dissipation, ESD events may occur, resulting in a mild static shocking sensation for the operator. To avoid this, operators should maintain a firm grip on the handle grounding strip & frequently touch objects that are not being sprayed to dissipate the negative charge that builds up during sprayer use.
Register sprayers with serial numbers & date code via website or app.
800-741-7788
victoryinnovations.com
Documents / Resources
|
VICTORY VP300ES Cordless Electrostatic Backpack
Sprayer
[pdf] User Guide
VP300ES, Cordless Electrostatic Backpack Sprayer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>