LISKA SV-SW8 Smart Bracelet Instructions

LISKA SV-SW8 Smart Bracelet Instructions

Compatible Operating System and requirements

Android 4.4 and above / 2. IOS 8.5 and above / Bluetooth 4.0

Preparation

Charge the smart bracelet for 2 -2.5 hours before turning it on for the first time. The battery signal will be displayed while charging.

Charge the smart bracelet once every three months if it remains idle.

Connection instructions

Mobile app download method
Method 1: Scan the OR code to download.
Method 2: Search for “Wearfit2.0” in the Android store or in the app store to download.

Functionalifies

• Time mode: Displays the remaining battery. date and time. sleep time. steps (Date and t. my was LC DM V,. the smart bracelet. Date and time will be synchronized after connecting to the device). press and hold to change the interface.
• Activity Information Interface – Record steps, distance, and calories burned in one day.
• Heart rate measurement. Measure the heart rate every hour or measure the heart rate manually. Press and hold to enter the heart rate measurement interface.
• Blood pressure measurement: Measure blood pressure every hour. or measure blood pressure manually. Press and hold to enter the blood pressure measurement interface.
• Blood oxygen measurement: Measure blood oxygen every hour or measure blood oxygen manually. Press and hold to enter the blood oxygen measurement interface
• Sleep quality information interface: automatic daily measurement of sleep quality.
• Training Mode: Press and hold to enter the training mode interface. Running. mountaineering and cycling modes are integrated. Press and hold to start recording exercise time and calories burned. Press to pause. Press and hold to exit the current mode.
• More: find my phone (press and hold to search, press to stop). music control (press and hold to enter or exit, press the corresponding button to play, previous song, next song), message reminder (activate notification in the App. the notification will be displayed on the smart bracelet once when there is App notification. incoming calls. received text messages). native information (check the model number. MAC address, firmware version, etc.), please turn off ( press and hold to turn off), return (press and hold to return to the top menu).
• Others: Raise your hand to wake up the screen. Sedentary reminder. Do not disturb mode. Shake to take a photo. Hourly measurement. Wechat sport. Apple Heatth. Adapt to language automatically. Remarks: The bracelet can receive news notifications in 12 languages, including Simplified Chinese. Traditional Chinese, English. Czech, German. Spanish. French, Italian. Japanese, Korean, Portuguese. Russian, and more.

Frequently asked questions

Can’t find the bracelet or can’t connect?
Android system:

1. Make sure that Bluetooth is turned on and that the Bluetooth sign is not on the smart bracelet (the smart bracelet is connected if there is a Bluetooth sign). Put the smart bracelet and device next to each other, try to search and connect. The connection can be established in Android 4.4 and higher.
2.  You can not connect yet, enter settings – application administration – authorization management – application access authorization, find wearfit 2.0 and allow access, enter the configuration again to activate the GPS location service, restart the phone, try connecting again.

IOS system:

1. Make sure that Bluetooth is turned on and that the Bluetooth sign is not on the smart band (the smart band is connected if there is a Bluetooth sign. Forget the device first). Go to settings – Bluetooth – I forget this device, after this the application is ready to detect the smart bracelet.

After fixing the smart band, does it show that it is not connected or that the remaining battery is 0%? Smart band and device are not properly connected, re- link devices.

No data is displayed in the app?
Pull down to refresh the main page, the data will be syn¢ed and displayed in the App. Automatic data sync will only be done when connecting for the first time. Subsequently, the data will be automatically synchronized every hour. Also, turn on hourly measurement. The app reads the hourly data (steps, heart rate) from the smart bracelet. There will be no data if houñy measurement is disabled.

After updating, no data is displayed.
Go to app settings – restore factory settings – turn off smart bracelet – turn on smart bracelet and reconnect to app. The data can be loaded into the application.

The time out of sync.
Go to Settings – Application Management – enable access to the application – connect the smart bracelet and the application again – Pull down to update the application.

Specifications

• Screen size …………………………..1.3 inches
• Bluetooth …………………………Bluetooth 4.0
• Water resistance …………………….P67
• Battery type…………………………. Polymer battery
• Battery capacity ……………………170 mAh
• Charging time ………………………. 2-2.5 hours

Observations

1. If there is any problem with product quality or product usage, please contact the store directly, we will deal with it quickly.
2. The measurement results of this product are for reference only and are not intended for any medical use or basis. Follow the doctor’s instructions and you should not self diagnose and treat yourself according to the measurement results.
3. The waterproof rating of the product is IP67, it can be used as waterproof, not for diving and not being in the water for a long time. You should also avoid hot water because water vapor will affect the sound.
4. The company reserves the right to modify the content of this manual without prior notice. Some functions are different in the corresponding software version, it is normal.
5. This product contains a polymer battery. Do not put this product in high temperature environment for a long time. Do not place this product near a flame.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>