iGear iG-1021 Camo Portable Bluetooth Speaker User Manual
- June 4, 2024
- iGear
Table of Contents
C amo
Playing the mood
Model No: in-1021
SPECIFICATIONS
Wireless version: 5.0
Speaker driver unit size: 4 INCH
Output power: 5W
Frequency response: 100Hz-20KHz
Signal to noise ratio: >=85dB
FM scan range: 87.5-108.0Mhz
Wireless range: 10 meter
Max memory USB/SD: 32GB
USB charging: DC 5V
Battery capacity: 1200mAh
Backup time via wireless mode: Approx 1.5-2 hours at max volume
Backup time via USB mode: Approx 1.5-2 hours at max volume
Charging via a USB port (PC): 2-3 hours charging time
ACCESSORIES
Charging cable: 1 piece;
Belt: 1 piece;
CONNECT TO BLUETOOTH DEVICE
Turn on the unit and switch on your mobile Bluetooth, then search for the name ‘iGear Camo’ and pair the device. Once the device is paired, Bluetooth will automatically connect when the unit is turned on subsequently.
- POWER OFF/ON: To turn ON/OFF the speaker.
- DC 5V: Plug the Micro USB cable into the speaker and connect the other end USB port to the power source. (DC 5V) – AUX: Aux-in jack.
- USB slot: Used to read the MP3 files on a USB drive, the maximum size supported is 32GB.
- TF slot: Used to read the MP3 file in TF/SD card, maximum size supported is 32GB.
- Play/Pause: Under USB/TF/Bluetooth mode, short press for play and pause.
- M: To change the mode during USB/TF, Bluetooth, FM, and Aux-in mode.
- PREV: USB/TF/Bluetooth/FM mode: Press to change to the previous FM channel/Track long press to decrease the volume.
- NEXT: USB/TF/Bluetooth/FM mode: Press to change to the next FM channel/track. long press to increase the volume.
- Torch NOTE: If FM mode reception is not good, connect a Micro USB cable for better FM reception.
BLUETOOTH
Turn on the speaker, it comes into Bluetooth mode directly. After pairing, the device can play music. Short press to Play/Pause, Short press to surf through Prev or Next track. Long press to increase or decrease the volume.
TWS OPERATION
- Turn on both the speakers at the same time.
- Choose one of them, on one of the speakers press and hold the “M” button for a few seconds, then a notification sound will indicate pairing.
Note: TWS works in Bluetooth Mode only
AUX-IN
Insert the AUX cable into the AUX jack, and press `M’ to switch to AUX-IN
mode. Long press to increase or decrease the volume. In AUX mode, the track
cannot be changed using the speaker buttons.
USB / TF CARD
Insert the USB / TF card into the USB / TF slot. It will read the MP3 format
music automatically. Press to Play/Pause. Short Press to switch to Prev or
Next Song. Long press to increase or decrease the volume.
FM RADIO
Long press the Play/Pause button, it will search for the available stations
and save them automatically. Once the search is completed, Short press the
button to switch between the saved stations. Long press to increase or
decrease the volume.
NOTE: AUX Port connection can receive FM signal clearly as it has the
same function as the antenna.
CHARGING
Please use the original charging cable to charge. Red LED display when on charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>