LISKA SV-10FD Smart Watch Instructions
- June 6, 2024
- LISKA
Table of Contents
LISKA SV-10FD Smart Watch
Please read this manual to fully understand the operation of the product. It
is connected to a smartphone via Bluetooth.
The smart watch has multiple practical functions and services for the
convenient use of your smartphone and some functions for sports and health.
The smartwatch is IP68 certified and can be worn in the rain or when washing
your hands or anything. However, please do not use it when you shower with
lukewarm water or have a sauna because it is not steam proof. If water enters
the smartwatch because you did not follow this manual, we will not provide
free repair. If there is water in the speaker hole, turn the speaker to return
the sound to normal.
Operating instructions
- Power button: press and hold to turn the smartwatch on or off, or short press to return to the standby page. If the smartwatch has been locked, press this button for 10 seconds to restart it.
- Back button: press briefiy to return to the previous menu.
- TP gestures: swipe left on the screen to enter heart rate mode or right to enter the main menu. When in a function, swipe right to go back or left to enter the next menu.
- Dial Change: A dial selection page will appear after pressing the time page. Choose the desired dial and dick “OK.”
- Status bar: swipe down on the standby page to show Bluetooth status, battery level, time, etc ..
- Charging: When charging the smartwatch, turn it over and align the contact points of the charging cable. The charging cable is attracted to the smartwatch by the magnet. PC USB port or standard SV smartphone chargers can be used to charge the smartwatch. It can be fully charged in about 70 minutes. Keep the two contacts of the charging cable away from conductive objects to avoid burns due to short circuits.
Connect the smart watch to your smartphone: Download the”FunDo” app on your smartphone and install it. There are two ways to do this, as shown below:
- IOS or Android smartphone user: use your smartphone browser to scan the QR code (Settings -Download the App) on the smart watch or the following QR code and download the first option. Or enter the page through the “Scan” function in WeChat, dick the option in the upper right corner and choose to download via your smartphone browser.
- Android smartphone user: Search for “FunDo” in the store app and download it.
- Apple Smartphone User: Search “FunDo”in App Store and download.
Select “Accept” for each permission request during application installation. The smart watch can perform all its functions after connecting via Bluetooth 3.0 and Bluetooth 4.0.
Bluetooth 4.0 connection: After installing the application, launch it and
enable the smartphone Bluetooth. The app will give you a prompt to enable the
notification. Click “OK.” Click “More” in the lower right corner to enter the
add devices page. In the time interface, slide down the status bar, dick the
Bluetooth icon to enable Bluetooth. Find the smart watch and dick “Connect” on
your smartphone. For some Android smartphones, the watch name can be searched
after enabling GPS.
Bluetooth 3.0 connection: enter the main menu of the smart watch, find
the name of the desired Bluetooth device in the”Bluetooth” menu,
choose”Activate Bluetooth”, dick the desired Bluetooth smartphone, dick “OK”
on the Bluetooth connection message and dick “OK” to get permission
information for each smartphone.
Check the Bluetooth connection: if the Bluetooth symbol in the drop-down menu
is green, it means that Bluetooth 4.0 has been connected; if it is blue, it
means that Bluetooth 3.0 has been connected; If it is blue at the top and
green at the bottom, it indicates that Bluetooth 3.0 and Bluetooth 4.0 have
been connected.
Notification settings: On your smartphone, enter “Settings” –
“Application Management” – “Fundo” and “Permission Management” sequentially
and enable all permissions there.Launch “Fundo”, choose “More”, “Application
notification” and “Enable background execution” sequentially, enter
application management and choose “No restrictions”. Click
“Back.” There will be a notice about enabling autostart again. Enable
autostart. Click “Back” and choose the applications you want to receive
synchronous notification, such as QQ WeChat. WeChat on your smartphone cannot
receive alerts when your computer version is on line at the same time. For
some smartphones, “Fundo” should be added to the power saving whitelist to
prevent it from being deleted in the background when the smartphone battery is
low.
Notification bug fix: Smartwatch notification is synchronous with your
smartphone (this applies to notifications about messages, incoming calls, QQ
messages or WeChat messages). So if there are no such notifications on your
smartphone, there will be no such notifications on your smartwatch. The
solution is to go into “Settings” and “Notification” on your smartphone, find
the corresponding applications and enable their notification.
Troubleshooting: Different smartphones probably have different Bluetooth
protocols and this can lead to an unstable Bluetooth connection between the
smartphone and the smartwatch. To resolve this issue, disable and enable
Bluetooth on your smartphone, or reset the smartwatch to default. If the
smartwatch has locked, press its power button to restart it.
Functions
-
Message: to sync the messages on your smartphone (not applicable to iOS smartphones).
-
Phonebook: to synchronize the contacts on your smartphone.
-
Call history: to synchronize the call history on your smartphone.
-
Dial: to connect with your smartphone to make phone calls from the smart watch.
-
Exercise: click to enter multiple exercise mode, choose an exercise and click on the screen to start exercising. For each exercise, there are data on the duration, calorie consumption,
number of steps, etc … When you want to pause or stop the exercise, click on the screen and choose the corresponding one. -
Pedometer: records the number of steps, calorie consumption and walking distance for each day. At 12 o’clock every night, it saves the data for that day and resets. Swipe up the screen to enter the page with options including “Status” (including “Activate” and “Deactivate”), “Previous records” (including local records from previous days), “Target” (to configure the number of steps each day) and “Personal Information” (to enter your gender, height, weight and other information for more accurate exercise data).
-
Electrocardiogram: With the help of optical heart rate technology, the smartwatch can obtain your electrocardiogram approximately tens of seconds later. After measurement, the letters “ToAPP” will appear on the screen and the electrocardiogram is saved in the “Fundo” application on your smartphone. You can share your electrocardiograms with others for reference purposes.
-
Heart rate monitoring: make the smartwatch fit your wrist well. It would be better to use it on the part of the wrist bone near the arm, to get your heart rate in real time (usually 80 to 90 times per minute). After clicking the start symbol in the lowest position, the smartwatch will start to display”Measurement … ” and it will get your heart rate about 20 seconds I ater. Swipe down the screen to enter the page with options to view past heart rates.
-
Blood Pressure: When measuring blood pressure, lay one of your arms fiat. The smart watch can measure your blood pressure approximately 48 seconds later. Generally, older people
have higher blood pressure than younger people, and hormbres have higher blood pressure than women. -
Sleep monitoring: the smartwatch records the duration and quality of your sleep from 9 p.m. until 9 a.m. to help you adjust your work and rest time to improve the quality of your sleep. Swipe up on the screen to enter the page with options including “Status” (including”Enable” and “Disable”), “Previous records” (including duration of deep sleep and duration of light sleep) and”Help “(Containing detailed instructions for use).
-
Session end reminder: You can set a maximum session duration for the smartwatch to ring and automatically remind you of the maximum session duration.
-
Blood oxygen monitoring: press”OK”to enter the blood oxygen monitoring page. Blood oxygen (SP02H) refers to oxygen in the blood (usually 94% to 99%).
-
Notification: You can view your QQ and WeChat messages in time through this function, after connecting the smart watch with the”Fundo” APP on your smart phone.
-
Music Play via Bluetooth: The smart watch can play the music on your smart phone.
-
Photography via Bluetooth: When your smartphone is not locked, the smart watch will enter the photography mode via Bluetooth and your smartphone will enter the photography
page. Click on the smart watch to take photos. The photos taken will be saved on your smartphone. -
Bluetooth: it is to search for a device to be connected, or to disconnect a device that has been connected.
-
Theme: There are two waiting pools to choose from.
-
Calendar: is for calendar display.
-
Alarm: you can set S alarms or long press the screen to delete an alarm.
-
Stopwatch: it is for the timing of one or several times.
-
Counter: is for a simple calculation
-
QR code: there is a QR code. You can download the” Fundo” application using the” Scan”function with the help of your smartphone’s browser.
-
Settings: It is to configure the smart watch.
- Bluetooth: Enable or disable Bluetooth.
- Clock: Offers”Clock faces” (there are multiple clock faces to choose from) and “Time Synchronization” (it is enabled by default. After the smartwatch is connected to your smartphone, the clock and phone time will be synchronized. If manual time setting is required, disable this function).
- Screen on after message: if this function is enabled, the screen will turn on with any message, however it consumes a lot of power.
- Sound: is to choose the ring tones of incoming calls and messages or to adjust the volume of multimedia, ring tones, messages, etc ..
- Display: is to adjust the brightness of the display and the duration of the backlight.
- Unit: is to choose a metric or British system for data units.
- Language: The auto sync function is automatically enabled, so the language of the smart watch will sync according to that of your smart phone, after the smart watch is connected to your smart phone. To choose the language manually, disable this feature.
- Restore defaults: In general, any software problem can be resolved by restoring the defaults.
- About: It is to view the model and software version of the smart watch.
-
Loss prevention: you can click “Search” on the smart watch to find your smart phone. In this case, the smartphone will sound an alarm.
Gestures: You can turn the smartwatch to silence an incoming call or alarm clock, or use a gesture (raise your hand) to wake up the system or wave your hand to answer a call.
Data transmission: download the”Fundo” app on your smartphone. After connection with your smartphone, the smartwatch can transmit data about your number of steps, heart rate, sleep quality, and multi-exercise mode to your smartphone. Some data must be synchronized manually.