LISKA SV-32DF Smartwatch Instructions
- June 5, 2024
- LISKA
Table of Contents
**Instructions SV-32DF
**
Device maintenance
Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly, especially its inner side, and keep it dry.
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare products should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
Schematic diagram of the main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug in the Magnetic charging
cable to charge the smart bracelet.
Downloading and binding of smart bracelet APP
Download and install the APP:
Scan QR code with a mobile phone to download APP.
For the 10S system, select APP, store search Da Fito Android system, and
select Google Play to download and install Da Fit. Or sean the QR code to
download
Note: your mobile phone must support Android 5.1 or 10S 8.0 or above, and
Bluetooth 4.0 or above.
http://api2.crrepa.com/app-download/dafit
Bind smart bracelet with APP
- Click on “Add Device” to bind the smart bracelet.
- Click on your device in the device list scanned.
- The IOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to the Android system.
- Successfully bound.
Introduction of smart bracelet functions
Power-on status
switch the menu interfaces of the main screen, as the interfaces shown in the
following.
Remove Device
For the Android mobile phone, the device can be disconnected from your mobile
phone by simply clicking on Remove device.
For Apple mobile phone after binding removal, you need to click on the symbol
on the right in Setting- Bluetooth and choose to ignore the device. As shown
below:
Frequently Asked Questions (FAQs)
-
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
l> Lock background APP. When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone.
2 > Set APP self-startup
3 > Unrestricted background operation.
The Android mobile phone installed with the APP intelligently restricts the background operation by default, and App should be set manually without any restriction. -
Why cannot the smart bracelet receive a message push?
l> Please confirm that you have turned on the switch for message push at the mobile phone client.
2 > Please confirm that messages can be displayed normally in the mobile phone notification bar.
The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS, and mobile phone client).
3>Turn on the mobile phone — Settings. Enter
“Notification use right” on the top search box, re-open Da Fit. -
Why can’t take a hot bath with the smart órace let?
Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with a small molecular radius and can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart bracelet.
Warning:
Please consult your doctor before you take a new sport. The smart bracelet
should not be used for any medical purpose though it may dynamically monitor
the heart rate at real-time.
Warranty:
We do not advise immersion of watches and we do not accept their return as a
guarantee, since we consider them only IMPERMEABLE.
We also do not recommend having a shower with it, as the hot water vapor can
affect both the battery and the clock module. Also, avoid sudden changes in
temperature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>