EFM Havana Speaker User Manual
- June 6, 2024
- EFM
Table of Contents
EFM Havana Speaker User Manual
Introduction
You can use Havana Pro with a tabIet,notebook and m•^Y ‹Ypes of smartphone’s to stream music,and enjoy handsfree calling.In order to get the best results when using the device, please read this manual first.
Package Contents
1x Havana Pro
lx USB Charging cable
1x Aux Cable
1x Wall Charger
1x User Manual
lmportant Safety Precautions
When using your Bluetooth Mobile Speaker, basic safety precautions should all Y be followed, including the following:
- Keep this product and its charging cable away from excessive heat.
- Do not operate this device with a damaged cable or alter it has malfunctioned or has been damaged in any manner.
- Do not disassemble your device.
Charging Your Speaker
-
Connect one end of the included USB Charpinp Cable to the Charging Port on your speaker. Then plug the other end of the USB Charging Cable into Wall Charger.
NOTE: The internal battery of your speaker takes approximately three hours to char e when com letely drained. -
When charging, the LED light will flash to indicate that the unit is charging. 3 orange lights will be lit when your unit is fully charged.
Power On / Power Op
Power On: Press and Hold Button 0 for 2 seconds to power on the speaker, then
working status Led will flash.
Power Off: Press and Hold Button 0 for 2 seconds to power off the speaker,
then working status Led will be off.
Pairing Bluetooth Devices to Your Speaker
In order to pair your Bluetooth audio device to your Bluetooth Speaker for the first time, follow the steps below:
- Make sure your Bluetooth audio source is close to your speaker.
- Press button 0 for 2 seconds to power on the speaker, the working status Led will flash .
- Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions
- Search Bluetooth devices and select “Havana Pro”. If required, enter the password ‘0000’ to confirm & finalize pairing.
- When the pairing is successful, you will hear a sound confirming.A white light will be solid and your device will show the connected Bluetooth icon.
Bluetooth Music Play
- Open the music player, select a song to p|aY• tap the button Ul to pause music and then tap again to resume music.
- Play music and touch and hold the button -I- to increase the volume, dOuble tap the button •{• to change the next song.
- Play music and touch and hold the button — to decrease the volume, double tap the button — to change the previous song.
Bluetooth Phone Call
Tap the button to answer an incoming call, tap the button again to end the call
Aux-in Mode
- Connect the speaker and mobile phone or computer by provided Aux-in cable.
- Tap the button loll to play music and then tap again to mute music.
Noted: When it is switched to Aux-in mode, + / — can only control the volume.
Battery Status
1.Short press 0 to indicate the battery statue.
If you own 2 or more Havana Pro Speakers (You can pair up-to 40 devices!) you can pair these together for ultimate sound or setting up multi-room audio. It is important to understand how this process works. As you can see above, one unit becomes the “Master Speaker” this is the speaker that connects to your device. The affectionately named “Slave units™ are then sent the audio from the master speaker once paired and turned on.
- Ensure only one Hayana Pro is turned – Pair to this speaker if setting up from new, or if you are already paired then move to the
- Power on your additional speaker (one at a time if paring more than 2)
- Hold the Bluetooth button down for 3 seconds on the MASTER speaker
- Now hold the Bluetooth button down for 3 secando on the additional speaker
- You should hear confirmation and a blue LED will illuminate – Music will now play from both speakers. Note the volume can be changed for each speaker independently by using the volume buttons on top.
- For additional speakers continue from step 2
Each time you turn a slave speaker on it will automatically connect to the master speaker.
Music Play
- Tap the button se on Master to play/pause track, the slave speaker will synchronize. When you tap the button on slave speaker. it will be mute: tap again to resume the music.
- Doude Tap the button +/ — on Mager tO Slop to next track! go back to previous track. the slaver speaker will synchronize.
- Touch and hold +/— on each speaker to slug the volume.
Phone Call
- Tap the button to answer an incoming call, tap the button again to and the call:
- Onlly Master can answer the call phone.
Reset
The bluetooth speaker me designed to pair any of One. This flexibility of design allows you to freely pair any speakers and make then, yours.
Touch and hold button to reset the speaker and then follow the step you want.
Waterproof
Havana Pro is IP67, it can be immersed in 1 meter of water for up to 30 minutes. you can follow the fun wherever it takes you.
IMPORTANT: To ensure that the Havana Pro is waterproof. please remove all cableconnections and tightly close the cap; exposing the Havana Pro to liquids without doing so may result in permanent damage to the speaker. And do not expose Havana Pro to water while charging, as doing so may result in permanent damage to the speaker or power source.
Specifications
eluetooth version V5.0
Mmtimum Output 20W
Built.in Power: Li-on 2500mAh
SNR:>75dB
Wireless Working Frequency: 80H2.20KHZ
Wireless Transmission Distance: up to I5M
Charging Tim: approx. 3 hours
Playback Time: 7.9 hours
Charging: DC 5 Vt 0.5/700mA
Size: Dia 79mmr79mmr18Ornen
THE EFM® 2 YEAR WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. EFM® will happily repair or replace defective goods for up to 2 years from the date of purchase. This warranty is against defects in the EFM® goods purchased and does not cover damage caused by the incorrect use or installation of the goods, or by modifications, or by accident.
To claim under the warranty, you need to return the faulty product to the place of purchase (at your expense) with a valid proof of purchase. If you are not able to return the product to the place of purchase, you can contact:
EFM Customer Service Department
PO BOX 684, Belmont WA 6104
P:1300 069 336 (1300 0 MYEFM)
E: info@myefm.com
Important:
The 2 Year Warranty covers EFM® product and not your device. Whilst we stand
by our products, EFM® will not be liable to any damages caused to your device
from accidental impact. For more information visit myefm.com/warranty-
support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>