Avantree BTSP-NB05 Wireless Personal Speaker User Manual

Avantree BTSP-NB05 Wireless Personal Speaker

Product Overview

1. Volume up
2. Multi-function button
3. Volume down
4. LED indicator
5. Microphone
6. Retractable earbud control (L)
7. Retractable earbud control (R)
8. Charging port
9. Power/off
10. Speaker/earphone mode switch

Basic operation

General function
Power on/off| Slide power switch to  position for 1 second
Pair| Press and hold for 5 seconds
Switch between speaker and earphone| Slide Speaker/earphone mode switch to
Retract the earphone| Click >> to retract the earphone
Music control
Play/pause| Click once
Volume up/down| Click +/- once
Next/previous track| Press and hold +/-
Call control
Answer/enda call| Click once
Reject a call| Press and hold
Activate Siri| Double click
End the 1st call to answer the 2nd call| Click once

LED indicators

(looks PINK) for 5 seconds
Low battery| LED flashes RED 4timesevery 5 minutes

Voice Prompts

Battery level

| After power on: “Battery full”“Battery level high “Battery level medium”

30 minutes before running out of power: “Battery level low”

Connected| “Connected”
Factory Reset / Clear Pairing History| Two “beeps”
Disconnected manually| “Disconnected”
Beyond the range of connections| “Beyond the range of connections”
Highest volume| One “beep”
Lowest volume| “du”

Connect to a Bluetooth device

1. Enter the NB05 into PAIRING MODE–For 1st use, once turned on, NB05 will enter pairing mode automatically, LED flashes RED & BLUE with a“pairing” voice prompt.For non-1st use, press & hold for 5 secondsto manually enter pairing mode.
2. On your device –Activate Bluetooth and select “AvantreeNB05” to connect.If you are using a Bluetooth transmitter, enter your transmitter into PAIRING MODE (Please refer to your transmitter’s user manual).
3. Once connected, you’ll hear a“connected” voice prompt from NB05.

Notes:
The NB05 will automatically turn off if 1) it fails to pair with another device within 2 minutes.
2) it’s kept out of connection range for over 10 minute

Connect with two Bluetooth devices simultaneously

1. Connect the NB05 to the FIRST device as shown above.
2. Enter the NB05 into PAIRING MODE again, your 1st device will disconnect from NB05. Then Activate Bluetooth and select “Avantree NB05” on your 2nd device to connect.
3. Now select “Avantree NB05” on your 1st device to connect to NB05.

NB05 is now connected with both of your devices.

Note: This feature only works for two mobile devices, such as cellphones andtablets. It doesn’t work for PCs or Bluetooth transmitters.

Reconnect to Bluetooth device

Once powered on, the NB05 shouldautomatically reconnect to themost recently connected device within 5 seconds. If itcan’t reconnectwithin 5 seconds, please select “Avantree NB05” on yourdevice to connect manually. (If you’re using a Bluetoothtransmitter, please refer to its user manual.)

Factory Reset / Clear pairing history

You may need to factory reset the NB05 when you experience short range, audio cuts, or cannot reconnect/pair.
Turn on the NB05. Press and holdthe“+” and the“-“buttons together for 5seconds, the LED indicator will light up RED and BLUE together(looks PINK ) for 5seconds, and you’ll hear two “beeps”. Now the NB05 has been successfully reset and will enter pairing mode automatically with the LED indicatorflashing RED and BLUE alternately

Charging

When you hear “battery level low”, you should recharge the NB05. Please plug it into a USB wall charger (DC 5V / 0.5-2A) or a powered USB port via the micro USB cable that we provided.

Normally it takes 3 hours to fully recharge. LED indicator will show RED while charging and automatically turn off when the charging is complete.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>