mucheln 52mm and 63mm Rosette Roller Mortise Installation Guide
- June 4, 2024
- mucheln
Table of Contents
mucheln 52mm and 63mm Rosette Roller Mortise
Structure Diagram
Accessories List
| No. | Name | Specification/mm | Qty(pcs) | Accessories |
|---|---|---|---|---|
| Escutcheon | 2 | |||
| 2 | Spring Mechanism | 2 | ||
| 3 | Cylinder | European Standard | ||
| 4 | Cylinder Screws | |||
| 5 | Mortise | |||
| 6 | Screws | 2 | ||
| 7 | Allen Screws | M4x6 | 2 | __ |
__
__
__
Screw Packages
8| Connecting Screws| M4x1O| 2
9| Studs| 0 6xM4x35| 2
10| Connecting Screws| M4x28| 2
11| Allen Wrench| 02|
| | | |
| | |
| | |
| | |
| | |
| | |
door thickness: 35 – 45mm
Installation
- Follow the Installation Specification and drill the hole for the rosette and escutcheon.
- lnstall the mortise with the wood screws.
- lnstall M4*10 connecting screws and cp6xM4x35 studs through the inner rose.
- Connect the inner rose with the escutcheon, and use the cp2 Allen Wrench to fasten the M4*6 Allen screws.
- insert the escutcheon through the cylinder, then insert the cylinder into the mortise.
- On one side, install the inner rose, adjust the position and stabilize with the M4x28 connecting screws.
- Attach the escutcheon to the inner rose, use the cp2 Allen Wrench to fasten the M4x6 Allen screws, then install the cylinder screws.
- Place the striker plate on the door jamp ensuring it is correctly located relative to the mortise. Mark this position, then chisel and drill out the striker cutout.
Read User Manual Online (PDF format)
Loading......