Energizer 46175 Motion-Activated Path Light Instruction Manual
- June 6, 2024
- Energizer
Table of Contents
Energizer 46175 Motion-Activated Path Light Instruction Manual
Read instructions or watch easy-to-follow video.
Scan QR code or visit
http://bit.ly/2Pdvi7n
Motion-Activated Path Light
Included items:
- Motion-Activated Path Light
- Pre-installed mounting tape
- Instruction manual
NOTE : Motion sensor has 120-degree detection angle and up to 15ft. detection range.
Battery installation and operation:
-
Remove the back battery cover by sliding it downward.
-
Mount the battery cover to the wall (or other mounting surface) by removing the adhesive cover and press firmly onto clean and smooth mounting surface. The product can also be mounted using the screw holes in the back battery cover with metal countersunk screws (not included).
-
Insert 3 AAA batteries, noting the polarity markings in the battery compartment.
-
Slide the switch inside the battery compartment to desired function.
• ON : Always on
• Auto : Motion-activated in low light levels
NOTE : To conserve battery life, the Motion-Activated Path Light automatically turns off 20 seconds after motion is NOT detected.
• OFF : Always off. -
Slide the light onto the mounted battery cover.
MADE IN CHINA
©2020 Energizer. Energizer, Energizer Bunny design, and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Jasco Products Company, LLC. All other brand names are trademarks of their respective owners. Neither Jasco Products Company, LLC nor Energizer Brands LLC is affiliated with the respective owners of their trademarks.
Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.
90-day warranty. Visit www.byjasco.com for warranty details.
46175 EnSp Manual v1
1/22/2020
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>