MANTA Smartwatch SWT05BP User Manual
- June 6, 2024
- MANTA
Table of Contents
SMARTWATCH
Model: SWT05BP
User Manual
APP DOWNLOAD
Scan the QR code given on the right side to download and install the APP to
the phone Or Search“Da Fit” Apps from the phone Google store or from the Manta
web page, then download it and install the same to your phone.
(supports IOS9.0&above and Android 4.4 &above, not fit all mobile phone
models, please refer to the actual one)
The watch works with an external Application for which Manta is not
responsible.
http://app.crrepa.com/site/download-cn
WATCH CHARGING AND ACTIVATED
Initially when you use it for the first time please make sure the battery is
fully charged, it takes 2 hours to be fully charged. Use the magnetic charger
to attract the metal contacts on the back of the watch (as shown on the
right), and connect the other end charger to the USB charging Head or computer
USB interface (please use 5V / 500mA charging head, the two charging thimbles
on the magnetic charger, the end can not be attached to metal objects, in case
short-circuit&fire happens, do not charge with the fast charging device.
CONNECT SMARTWATCH
(Connect the smartwatch with the phone directly in the application)
- Switch watch on long-press the side button for 3-5 seconds
- Please turn on the phone’s Bluetooth and location service and make sure the watch is not bound to other devices
Launch fit on your mobile phone Edit your personal information Enter the
device interface (middle bottom icon) Click “ADD DEVICE” Then select your
SWT05BP model from the list Device has been properly connected To be sure, you
can check your MAC address; you can use it to identify your device in the list
of available devices.
Each time you open the app, the watch will automatically connect to the phone.
After the right-slide of the main interface of the watch to enter the MAC
address interface, the Bluetooth icon will appear, indicating that Bluetooth
is connected. If there is no Bluetooth icon, Bluetooth is not connected.
NOTE:
- When using GPS under sports mode, please turn on-location services for phone and device, the watch does not have GPS function,you can open the GPS function in the app.
- The data of step, sleep, heart rate, blood pressure, and blood oxygen saturation of the watch will be synchronized to the APP. The relevant data can be synchronized by pulling down the corresponding page. More detailed information analysis and data recording can be viewed from the APP.
- Before you start monitoring, you need to put a smartwatch in your hand
FEATURES
Main interface / dial
Built-in dial switch: Left slide on the main interface of the dial to enter
the function menu, select the switch dial, open and slide to select the dial,
click on the selected one.
Switch the customized dial through the APP: App’s device page dial selection
dial’s choice Click on the dial edit to select the picture tick in the upper
right corner.
Set more dials through APP: APP device page dial selection find more dials
click on your favorite dial picture click to download now Please do not leave
the page during download
Pedometer/Distance/Calorie Burnt
The watch can record the number of steps taken every day, the walking step data can be synchronized to the APP, the distance of the walking step, calories, and other data details can be viewed from the APP (the number of steps, distance, calories, etc, recorded in the watch end of the day) The data will be cleared at 00:00 every day)
sleep monitor
Users wearing the watch to sleep can detect the length of sleep, as well as deep sleep and light sleep state, adjust your sleeping time according to the data’s reference, improve your body’s health index. The defaulted sleep monitoring time is from 22:00 pm to 8:00 am, the sleeping data result of last night will be displayed after 8:00 am, data can be synchronized to the APP, the sleep data detailed information analysis and data record can be viewed from the APP.
Heart Rate
Slide to the heart rate function interface, the heart rate will start automatically after 2 seconds (you can also click the heart rate icon to stop/start during the measurement), the test data will be displayed when the measurement is completed, the heart rate monitoring data can be synchronized to the APP, and the detailed HR information analysis and The data record can be viewed from the APP (Please utilize the correct posture when measuring, the measurement results are for reference only, can not be used as medical data)
Sports Mode
Click the sport mode icon to enter the multi-sport mode: walking, running, cycling, skipping, badminton, basketball, football, and swimming. Slide up and click to enter monitoring, and right-click on the sports mode interface: pause/stop, sport mode data can be synchronized to the APP, sport mode monitoring detailed information analysis and data records can be viewed from the APP
Blood Pressure
Slide to the blood pressure function interface, the blood pressure will automatically start measuring after 2 seconds (the blood pressure icon can also be stopped/started during the measurement), the test data will be displayed when the measurement is completed, the blood pressure monitoring data can be synchronized to the APP, monitoring detailed information analysis and data record can be viewed from the APP side (Please sit in correct posture when measuring, the measurement result is for reference only, can not be used as medical data)
SPO2
Enter SPO Menu,
after 2 seconds will be monitored automatically(Or Click SPO2 Icon On/Off)),
When monitoring is complete it will display data. Data can be synchronized to
APP, SPO Analysis data and details can view by App (Please wearing in your
hands, then start monitoring, result only for reference, cannot be used as
medical data
Breathe Training
Click breathe icon, start training, the instruction to be Breathe in/out(
Usually breathe training help to relax emotions, reduce psychological stress,
and improve lung function)
Weather report
In weather interface, will be displayed today and tomorrow’s weather remark:
Weather display must work with App
Music Control
After connecting to App, turn on your mobile phone player manually. In the watch, you can control the last song, Next song, or Play and pause (The app must run in the background – if your phone automatically closes the app, it will stop working due to power-saving settings)
Message Notification
On the Main page, slide-down touch will display the notification page, when a new message is received, Watch will vibrate and displays the message. The watch will display the latest three messages and automatically overwrites the first stored message when the later message is received. Including SMS and other messages.
Other Menu
The right slide screen will display the interface, you can check version info, BluetoothMACaddress, battery percentage display, and Bluetooth connection status After dragging to the left in the main interface, pages of other functions will be displayed: remote shutter, stopwatch, display brightness settings, dial style selection, reset and turning off the watch.
Why the watch can’t receive the message notification?
SinceAndroid mobile phone background will automatically “ clean up” the App
which is not commonly used, it will cause the watch connection to drop and no
longer push the message.
- Make sure to turn on message push in the DAFIT setting
- Make sure the message can be displayed in the mobile phone’s notification bar, message notification is pushed by reading the phone notification bar, the watch can’t get a notification if the message push closed in the mobile phone setting.
Note: Find notification settings in phone settings, turn on What Sapp, Facebook, phone, SMS, and another notification switch (Depending on different area or software version, some functions may not support notification)
Why does the watch can’t auto wake on while l lift up the wrist
-
Make Sure the Quick View Function had selected from your apps.
-
Use the right Position and Angle to make watch Auto Wake up easily.
Method 1: Raise your hand from the vertical position to the normal watch posture and the display will turn on when the surface angle is 30-85 degree
Method 2: The display stays off when the watch is away from your face and when turned toward your face at 30-80 degrees the watch display will turn on.
Android phone setting
Find and open accessibility features in phone settings or open DafitionNotifications to find a message push, choose the message notification as to the right picture. At the same time, click on “Accessibility” in this “Message Push Interface” to find Dafit and turn it on.
Getting to know your Device
It is forbidden to throw this product into the fire to avoid explosion. The
battery life varies according to the environment and user mode.
Why does the blood pressure data be different from the Sphygmomanometer?
The difference between the smartwatch data and the sphygmomanometer is
determined by a variety of factors. The measurement site of the
sphygmomanometer is in the radial artery, and the measurement site of the
watch is the two main branches of the arteriole. Normally, the difference
value between aortic blood pressure measurement and micro arterial measurement
is 3~40. Because the blood flows in the artery in the direction of the
centrifuge, if you use the smartwatch and sphygmomanometer to measure at the
same time the sphygmomanometer band makes your elbow under pressure. The blood
pressure cannot flow smoothly to the lower branch of the artery-and increased
vascular tension, which will make the difference larger.
Why can’t wear the smartwatch to take a bath &hot springs&sauna?
The bath water temperature is relatively high, it will produce a lot of water
vapor, and the water vapor is a gas phase. Its molecular radius is small, it
is easy to infiltrate from the shell gap of the watch, and when the
temperature drops, it will recondense into a liquid phase. Water droplets can
easily cause a short circuit inside the watch, damage the circuit board, and
damage the watch itself.
Application
With the DAFIT application you can:
– Monitor your health data like heart rate, blood pressure, blood oxygenation
– Monitor your sports data like distance traveled and calories burned.
– Monitor and track your sleep quality
– Change the appearance of the watch face
Warnings
This product is not a medical device. Smartwatches and related applications
should not be used to diagnose, treat, cure or prevent ailments and diseases.
Before you suddenly change your exercise and sleep habits, consult a
specialist to avoid serious health effects.
Measurement results may slightly differ from measurements made on
professional devices
Our company reserves the right to modify and improve the functions described
in this manual without prior notice. At the same time, we reserve the right to
constantly update the product. All content applies to the actual product.
Correct Disposal of this product.
This marking indicates that this product should not be disposed of with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this.
The product and accessories may slightly differ from those presented on the
packaging.
All tips, instructions, certificates, and additional information on MANTA
equipment are available on www.manta.com.pl
“MANTA” is a registered trademark of MANTA S.A. All rights reserved. Copying
and reproduction are strictly prohibited. All brand and product names listed
are trademarks and registered trademarks of their respective holders and are
recognized as such in this document. They were used for information purposes
only. The specification is subject to change without notice.
Manta S.A. hereby declares that the SWT05BP device complies with the RED Directive 2014/53/EU. The full text of the declaration of conformity is available at www.manta.com.pl
SERVICE INFOLINE
tel: +48 22 123 96 60 or e-mail:
serwis@manta.com.pl
from Monday to Friday. 9.00-17.00
The manufacturer reserves the right to make changes to the product
specifications without notice.
Home: www.manta.com.pl
Home support: www.manta.info.pl
SCAN QR CODE, TO FIND MORE ABOUT THE PRODUCT
Producent/Producer
Manta S.A.
ul. Matuszewska 14,
03-876 Warsaw, Poland
www.manta.com.pl
Made in P.R.C.
FOR MANTA EUROPE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>