MANTA MES1002J Electric Scooter User Manual
- June 13, 2024
- MANTA
Table of Contents
Electric Scooter
MES1002)J
MES1002J Electric Scooter
USER MANUAL
DECLARATION OF CONFORMITY
MANTAS.A.
Declares with full responsibility that the product; Nazwa artykulu / name of
the article: E-scooter
Model: MES1002J
It has been designed and marketed in accordance with the following directives:
EMC: 2014/30/EU
LVD: 2014/35/EU
MD: 2006/42/EC
ROHS: 2011/65/EU
MSDS
UN38.3
And with following norms:
EMC: EN 61000-6-3:2007+A1:2011
EN 61000-3-2.2014
EN 61000-3-3.2013
EN 61000-6-1:2007
LVD: EN60335-12012+A11:2014+A2:2016
EN60204-1:2006+A1:2009+AC:2010
Machinery: EN ISO 12100:2010
EN 14619: 2015
EN 15194:2009+A1:2011
Serial numbers range:
From: MES1002JV26A00HC0001To: MES1002JV26A00HC0560
Person authorized to sign the CE declaration:
Bogdan Wiciriski
CEO for company Manta S.A.
Warszawa
15.02.2023
INTRODUCION
Please receive our congratulations for your choice of the electric scooter. We
kindly ask you to at-tentively read this instruction before your first ride,
to get the utmost pleasure and to use it with the highest efficiency. Please
pay a thorough attention to the safety instructions and battery conservation.
The electric scooter has been design and developed according to the latest
Production and quality control standards. It is environment friendly and
pleasant to use.
‘The electric scooter has IPX4 protection class – protection against small
water spalshes from any direction.
INTRODUCION OVERVIEW
Possible dangers by riding
All units and technologies used in the scooter have been highly thoroughly
tested. But if you do not observe the service safety instructions, you may
have an accident.
Every time you use the scooter you hazard your health, if you lose control,
fall or have a crash, there may happen even a fatal accident.
In order to reduce the health hazard, please get acquainted with all
instructions and warnings, both from the instruction and written on the
scooter itself.
Preparation to ride
Before you start to use the device, the first thing to do is to get the
scooter assembled. The battery must be loaded for at least 10 hours before the
first ride. You are going to learn more about the preparation for the ride
further on in this instruction.
SAFETY
Safety instruction
‘The device cannot be used by children under the age of 14, as well as by
people with physical, mental or sensory disabilities, as well as inexperienced
and unfamiliar with the scooter. Children should be taught by adults not to
treat the device as a toy. Children should not clean or maintain the scooter
unsupervised.
Safety measures by riding
Before you start to ride your new bike, please check whether it is unfolded
accordingly and whether it has any damages, and after that get acquainted with
your environment. You should not wear any sharp jewellery to avoid getting
wounded. The scooter is a single-seated electric vehicle, which means that
just one person can use it.
ATTENTION: if you press the gas button for about 5 sec, by a stable
speed, e. g, 20 km/h, the scooter automatically switch on the Easy Ride
function that means your scooter will drive with the same stable speed with
which you activated the function. You may switch off Easy Ride by pressing the
brake or accelerating,
Safe riding information
-
Always stay with both your feet on the platform.
-
Avoid pits and bumps.
-
By riding, delicately press the brake, to feel it.
-
By riding bend delicately forward, tum easily and delicately.
-
When you walk your scooter, never press the speed button.
-
Do not press the speed button when you ride downwards.
-
Hang no heavy things on the scooter handlebar.
-
Avoid riding under rain
-
Always hold the handlebar with both hands.
-
Do not speed up on pits and bumps.
-
Avoid suspended obstacles, both indoors and outdoors.
-
Categorically do not drive through water, puddles, mud and wet surfaces,
-
E-Scooter is designed for just one user exclusively.
-
Do not ride the municipal roads.
-
Do not make abrupt movements by a high-speed riding
-
The e-scooter is not meant for competition riding jumps, etc.
SERVICE
Equipment
Spare parts:
The electric scooter is a vehicle designed for personal transport. It is powered by a electric motor, whose design limits the speed to 20 km/h. The e-scooter should be used in accordance with local regulations
Assembly
- Unfold the tube of the folding structure. Close the folding mechanism clamp.
- Place the handlebar handle horizontally. Use a suitable wrench to tighten the steering wheel bolts. Check tire pressure .
- Turn on e-scooter and test all functions for proper action.
First ride
Beginners must wear protective shields for the whole body as well as a helmet
during the first ride, too reduce the risk of falling
- Switch on the scooter and check the battery load level,
- Put one foot on the scooter platform and kick off with the other.
- When the scooter begins to move, stand on the platform with both your fect and press the gas button.
- Release the gas button the reduce the speed. Use the brake to stop immediately.
ATTENTION: E-Scooter is equipped Kick- to- start technology. The essence of it is that the button switches only after the scooter speed is higher than § km/h. Due to that the undesired start just from the spot as well as the motor overload are eliminated.
Transportation
Please ensure that the E-Scooter is switched off and handlebars are folded. Untighten the folding mechanism block. Bend the fold lever and join the handlebar with the rear splasher till you hear the Klick of the handlebar fixing with the rear splasher.
Brake regulation
If the wheel is too tight or too weak by the brake useh and to adjust the screw on the bottom end of brake cable
Tyre inflation
If the pressure in the tyres is reduced, use the bicycle pump to inflate it up to the according values which are given on tyre sides.
DISPLAY LCD
Display LCD – control panel
A. Speed indicator in km/h.
B. Gears (to change press the power button shortly).
- Eco(upto6km/h)
- D (upto15km/h)
- S(upto20km/h)
C. Lights (to turn on, press the power button twice).
D. Warning about wrong temperature for the device.
F. Information about the fault.
E. Battery charge status (each dot accounts for about 20% of the battery
capacity).
LITHIUM BASED BATTERY SERVICE INSTRUCTION
Battery safe service
-
Battery life is limited. Should you use it after its life span time, you may notice that the full charged battery function time is reduced significantly.
-
Battery cells contain chemical substances. Do not open them, nor put any things the rein to.
-
It you stick an alien metal object into the battery it may damage you or even lead to an explosion.
-
Use just an original battery charger which is delivered together with the e-scooter.
-
Observe the local transportation instruction during the service and deliver of the battery.
-
It is recommended to keep the product with a 50% up to 80% charge level.
In case the device is kept unused, check the battery charge level every 3 – 4 week and recharge if necessary.
To achieve the better efficiency of the battery it should be used within the range of +5°C up to 40°C -
Do not keep the product under the temperature below +5°C and higher than 40°C
-
Should you use the e scooter for a longer time the battery will get hot which is normal
-
The battery will become weaker in a cold environment even fully loaded
-
D0 not open or modify battery
Before the first usage fully charge the battery
During the next charging the red diode will indicate the charging process The
green diode tells you that the charging process is over and the battery s full
Connect the charger to the e scooter first then to the power socket Be sure it
is connected properly
Charging instruction
Charging instruction
REMARKS:
– When the charging s finished, disconnect the charger from the e-scooter
first. Please remember to have dry hands when disconnecting the charger from a
power socket.
– Please, note that the charger must remain open throughout the entire
process, for it becomes hot and need a natural ventilation.
– Keep the e-scooter during charging in a safe place, far from children.
– Should you notice any discrepancies during charging like too high
temperature, or a strange smell, disconnect the charger at once and contact
your supplier.
– The charging time takes about 7-8 hours and when the e-scooter is charged
fully, the charger switches out by itself.
– The room where you charge your e-scooter should be dry and clean.
– Do not connect the charger if the charge socket is wet.
– Do not put any conducting objects into the charger socket for it may lead to
the short circuit and damage the electric units of the e-scooter.
CONSERVATION SCHEDULE
A corresponding care of your e-scooter will ensure you its efficiency and prolong its life span. Store the electric scooter in a dry room. The following tips will help you to keep your e-scooter in the best condition:
Daily care.
After each ride with your e-scooter:
- Clean your e-scooter on the outside, using the wet smooth cloth .(DO NOT WASH WITH A GARDEN HOSE!)
- Check if all screws are well tightened.
- Check the proper function of the charger.
SERVICE INFOLINE
tel: +48 22 123 96 60 or e-mail:
serwis@manta.com.pl
from Monday to Friday, 9:00-17:00
The manufacturer reserves the right to make changes to product specifications
without notice.
Producer: MANTA S.A.
ul. Bardowskiego 10,
03-888 Warszawa
tel: +48 22 255 95 31,
e-mail: manta@manta.com.pl:
www.manta.com.pl
Year of production: 2023
Net weight: 18 kg
Waterproof: IPx4
Max. user weight: 120 kg
Made in PR.C.
FOR Manta S.A.
Documents / Resources
|
MANTA MES1002J Electric
Scooter
[pdf] User Manual
MES1002J Electric Scooter, MES1002J, Electric Scooter, Scooter
---|---